熟悉微机原理，对无损检测自动化有一定见解，自己曾用80c51单片机做过一些项目。
I familiar with the MCU and have my view in the automatic of NDT, I had do some project in the 80c51 MCU.
详细介绍了光发送、光接收电路和单片机与微机的串行通信控制接口。
Transmitting and receiving circuits and serial communication and control interface between PC and microcontroller are described in detail.
介绍了一种基于单片机at89c52的同步发电机微机励磁调节器的设计与研究。
A design and research of microcomputer excitation regulator for synchronous generator based on AT89C52 chip microcomputer is introduced.
LED旅客引导系统，采用一台微机控制多台单片机的类网络控制结构，具有灵活的控制方式；
The LED leading system for passengers is a system similar to network structure with one computer controlling several monolithic processors, and its control mode is flexible.
它通过单片机对温室综合环境因子采集及上位486微机监控和管理，实现对温室综合环境控制功能。
It realises controlling function through the synthetic environment factors gathered and detected by single chip microcomputer and supervised by epistasy 486 microcomputer.
将其与传统的晶体管图示仪相结合并通过单片机和串行通信在微机上显示晶体管特性曲线。
Combining with old transistor curve grapher, using single chip computer and serial port communication, the transistor characteristic curves is displayed on the microcomputer.
本设计探讨了如何利用微机实现自动抄表的方法，着重说明了单片机自动抄录电度表的过程。
This paper probes into the method of how to use the microcomputer to realize auto-reading, focusing on the process of auto-reading with single chip computer.
用热敏电阻器作温度传感器，87C51单片机作主控微机，加上放大器、模数转换器等组成主要硬件系统。
The main hardware is composed of thermal resistor as temperature sensor, 87C51 single chip processor, as main control computer, together with amplifier and A/D transfer.
本文介绍一种适用于高等专科学校、使用单片机的微机控制技术课程的实验装置。及采用该装置的典型实验。并讨论了有关实验设计的原则。
This paper introduces an experimental instrument for single-chip computer control, suitable for senior colleges and the typical experiment and some principles about experiment design are discussed.
应用单片机和微机技术，开发出一种CAT振动参数测试系统。
By using single chip computer and microcomputer technology, a computer aid test (CAT) system of vibration parameters is developed.
通过USB接口实现单片机与微机的数据通信，完成条形码数据的上传。
The data communication between SCM and microcomputer was achieved by the USB interface, and the barcode data uploading was performed.
基于PC机的多节点网络化控制，实现单片机与微机的通讯。
To finish the communication between the single chip and the computer on the base of the multi-node network control of PC.
本文介绍一种8098单片机与微机间的通信协议和方法。这种方法特别适合于数据量较大的场合。
This paper describes a way to establish a communication agreement between the 8098 chip microprocessor and the microcomputer, which is suitable for the processing of a large amount of data.
该采集系统采用8051单片机控制超声波的发射与接收，采用RS232与上位微机通讯。
The acquisition system is composed of 8051 Single Chip which controls transmitting and accepting Ultrasound, and to use RS232 as a message channel to upper computer.
本文论述智能仪器的特点和作用。提出了智能仪器中微机的首选机型应是单片机。
This paper describes characteristics and functions of intelligent instruments, It is advanced that first selective model for microcomputer in intelligent instruments ought to be single chip computer.
采用PID同步控制算法、单片机控制技术和光电数字测量技术，研制了多电机同步传动微机控制装置。
By adopting PID synchronous control algorithm, single chip microcomputer and photoelectric digital measuring technology, multi motor synchronous drive microcomputer control device ws developed.
在模拟控制和微机控制技术研究的基础上，开展了8098单片机控制脉冲tig焊机的研制工作。
Based on the study on the analogously controlled and microcomputer controlled power source, a new 8098 single-chip microcomputer controlled welding machine is developed for the pulse TIG welding.
本文设计的回流焊温度测试仪由现场单片机控制的测试系统和上位微机组成。
In this paper, we design an instrument that consists of a detection system controlled by single chip microprocessor and a computer.
本文在传统晶闸管逆变弧焊电源的基础上，实现了采用8098单片机系统的微机控制模式。
In this paper, the micro-computer controll mode adopting 8098 slice computer system is realized on the basis of traditional thyristor arc welding rectifier.
目前，激光打标控制器主要有两种控制方式，一种采用微机(PC机)控制，一种采用单片机控制。
At present, laser-marking controller mainly have two control modes, one adopts PC control, the other adopts SCM (Single ChipMicrocomputer) control.
本课题利用MCS-51系列单片机8031成功地研制出一种新型微机摇尺控制装置。
This paper is about singlechip control carriage device of woodcutting machine. It based on 8031 of MCS-51 series.
用单片机和微机共同构成的通用钻井深度系统由硬件和软件组成。
The general drilling depth system is composed of a single-chip microcomputer, a personal computer, hardware and software.
介绍了一种在DOS下，利用驻留程序实现一台微机与多台单片机的数据交换的方法。
This paper introduces a method which can utilize TSR for executing the data exchange between the microcomputer and the single - chip microcontroller under DOS.
在分布式微机控制及数据采集系统中，控制与数据采集由单片机实现，复杂数据的处理越来越多地由PC机完成。
In distributed system, task of control and data acquisition is completed by single-chip microcomputer, and data processing is carried out by PC.
采用80c196单片机为控制核心，解决了窄间隙埋弧焊机的微机控制问题。
The control system by microcomputer for tandem wire narrow gap SAW machine is solved adopting 80c196 monolithic computer.
介绍了以MCS-51 系列单片机为微处理器的微机控制混砂系统的设计原理。
This paper introduces the design of microcomputer burdening system on molding sand based on the MCS-51 microprocessor.
本文详细介绍了基于DSP和51单片机的双CPU微机型电动机保护装置的设计。
This paper introduces the design of microcomputer motor protection device based dual CPU structure: DSP and MCS-51 in detail.
详细论述了一种基于微机械传感器与AT 89 C2 0 51单片机的智能振动传感器。
A smart vibration sensor based on AT89C2051 microcomputer and the micro-accelerometer is described.
单片机作为一种新型的高效率微机，以其独特的结构与性能在电工技术领域内获得了日趋广泛的应用。
As a new lvpe and high efficiency microcomputer, the Single Chip Computer (SCC), by its particular structure and performance, is widely used in the field of electrotechnics day by day.
介绍了硫化过程微机集散控制系统中PC总线工业控制计算机与多台MCS-51单片机为核心的硫化控制仪之间的多机通信的方法与实现。
The method of data communication between PC bus industrial computer and MCS-51single chip computers in rubber vulcanization distributed control system is introduced.
应用推荐