研究了制备的泡沫铝在单向压缩下表现出的力学性能。
The mechanical capability in unilateralism compress of aluminum foams was studied.
由有限变形理论推导出单向压缩和平面应变有限元模型。
The corresponding constitutive equations based on finite deformation theory are presented.
介绍板在单向压缩和剪切载荷作用下的屈曲模态、临界载荷和平衡路径。
This chapter indicates buckling modes, critical load and equilibrium path of plate under axial compression and shear load.
采用里兹法和切分拟合的数学方法，讨论了单向压缩和弯曲共同作用的薄板弹性屈曲问题。
This article adopted Ritz method and divide-fit mathematical method, solved the problem of elastic buckling of thin plate under compression and bend multiplicity action.
第五、通过单向压缩试验和三轴cu试验，得出了吹填土微结构特征参数随荷载变化的规律。
Fifthly, the discipline of micro-structure characteristic parameters change by the load has been received through compression test and triaxial CU test.
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of generalized yield criterion are validated for sintered powder metallurgy materials.
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of gene...
利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。
The textural features during ferrite refinement by deformation enhanced transformation were analyzed by means of orientation mapping based on the EBSD technique in a Q235 low carbon steel.
利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。
The texture evolution of ferrite during warm compression of Q235 low carbon steel was determined quantitatively by means of orientation mapping based on the EBSD technique.
采用结构代表胞元模型数值模拟了在不同相对密度范围的单型铝蜂窝结构在单向压缩过 程中的变形、失稳和破坏现象。
The model of representative unit cell (RUC) is used to numerically simulate the deformation, instability and collapse of single-mode aluminum honeycombs under uniaxial compression.
在热模拟单向压缩实验中，通过形变参数的变化考察了Q 235碳素钢应变强化相变的基本规律及铁素体晶粒细化效果。
The characteristics of strain enhanced transformation and ferrite grain refinement are investigated under different processing parameters by thermal simulating tests of Q235 plain carbon steel.
利用背散射电子衍射取向成像技术分析了在热模拟单向压缩条件下Q235碳素钢应变强化相变中铁素体晶粒的取向（差）变化特点。
The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
该文以铅作为试验材料，测定单向压缩有限变形和双向受约束两种情形下的载荷位移曲线，建立了基于欧拉描述的铅有限变形本构方程。
The keypoint to simulate the metal forming process by using finite deformation theory is to define the constitutive equations of the material.
第二、通过单向压缩试验、三轴剪切试验和灵敏度试验，研究了不同成因不同深度淤泥质粘土的结构性和结构强度，研究表明均具有很强的结构性。
Secondly, the structural behaviour and strength of structure of mucky clay with different depth and cause of formation have been studied, which shows that they all have strong structural behaviour.
普通单向作用气缸，压缩空气仅从气缸的一端进入气缸，以推动活塞前进；
The role of an ordinary one-way cylinder, compressed air from one end of the cylinder into the cylinder to drive the piston forward;
单向阀能防止管路中的空气回流，以及随之而来的因压缩空气朝这一方向流动而产生的压力损失。
The check valve avoids refluence of air in pipe - lines and consequent pressure loss in which compressed air is intended to flow in one direction only.
单向阀能防止管路中的空气回流，以及随之而来的因压缩空气朝这一方向流动而产生的压力损失。
The check valve avoids refluence of air in pipe - lines and consequent pressure loss in which compressed air is intended to flow in one direction only.
应用推荐