最后给出了各调度单元模型的详细建立方法。
In the end, the detailed setting-up method of the scheduling unit models is provided.
本文在有限元法的基础上利用弹簧单元模型来分析。
Based on the finite element method, a spring element model is used.
基于该方法建立的单元模型具有高度的柔性和可重用性。
Furthermore, the model based on this approach has the high degree of flexibility and reusability.
基于储层非均质性的层次性，可分步骤建立流动单元模型。
According to the hierarchical properties of the reservoir heterogeneity, the flow unit model can be founded by following steps.
本文提出了适用于非规则布置房屋结构隔震体系计算的层单元模型。
The storey element mode for irregular isolated structure is suggested in this paper.
在高层建筑开洞剪力墙有限元分析中软件用户面临不同板单元模型的选取问题。
During the finite element analysis of shear-wall with opening in high-rise buildings, how to select an appropriate plate element model possesses important significant for software users.
在此基础上，建立钢绞线吊杆地实体单元模型和组合单元模型，进行计算分析。
Then the solid finite element model and the integrated finite element model of suspenders are built up.
提出一个面向曲面nc加工刀位计算的曲面离散基本单元模型及其误差控制方法。
This paper presents a new discrete model of NC path generation for free form surface machining.
本文在比较这三种单元模型优缺点的基础上，提出了一种新的埋置组合式单元模型。
Based on the analysis of the advantages and disadvantages of the three element models, this thesis presents a new combined element model.
作者结合三维实体单元模型，介绍如何对其进行面向对象的非线性有限元程序设计。
Based on the three-dimension solid element, how to design for Object-Oriented nonlinear FEM Program.
建立全承载客车骨架的有限元壳单元模型，分析其静力、模态、频率响应和疲劳寿命。
The FEA(finite elements analysis) model is established for coach monocoque frame. The analysis on static, mode, frequency response and fatigue life are carried on.
提出了空间柔性转子梁单元模型，建立了考虑关节及杆柔性的空间机器人动力学方程。
The model of a spatial flexible rotor beam element is presented, and the dynamic equations of spatial manipulators considering joint and link flexibility is derived.
通过运用大型有限元结构分析软件，建立全桥组合有限单元模型对全桥结构进行计算分析。
General purpose analysis software is applied to establish and calculate a model of integrated finite element model for whole bridge.
提出一种板桁结合梁剪滞效应分析的有限段单元模型，避免了常规计算方法中的某些不足。
A kind of finite segment element model for analysis of shear lag effect in plate and truss composite girder is proposed. The model avoids certain deficiencies in conventional calculations.
理论分析和试验研究表明：梁格法能较为简便地分析此类桥梁，计算精度接近实体单元模型。
It shows that grillage analogy method can analyze the type bridge easily and its calculation accuracy closing to entity unit model.
导出斜型薄板单元模型并应用于有限元线法(FEMOL)求解平行四边形斜板的弯曲问题。
A parallelogram oblique element model is developed in the Finite element Method of Lines (FEMOL) for the solutions of oblique plate bending problems.
针对阻尼合金夹层梁提出了一种2节点10自由度梁单元模型，给出了该单元运动微分方程。
A beam element of 2 nodes and 10 degrees of freedom with interlayer damping alloy is presented and the element differential equation of motion is put forward.
基于小平面单元模型，给出了一种模拟满足随机分布特性的星载SAR目标原始数据的方法。
Based on the facet model, a method of the simulating of Spaceborne SAR raw target dates with random distribution is proposed.
为了突出主干和分支网络的特殊性，提出了节理单元模型并专门推导了节理单元的连续性方程。
A joint element is presented to represent the trunk and branch networks and used to derive the continuity equation for these two network systems.
两组对称倾转晶界的计算机模拟结果表明，介稳结构的多重性确实可根据结构单元模型加以预言。
Two sets of computer calculations of symmetrical tilt boundaries are presented and it is shown that the calculated multiplicity of metastable structures is readily predicted by the structural model.
介绍了适于混凝土材料的离散单元模型的破坏准则、计算方程以及弹簧系数等计算参数的确定方法。
The failure criterion, formula and determination of analytical parameters such as spring modulus of the discrete element model for concrete material were presented.
通过建立松散体离散单元模型，采用ALE耦合算法，模拟了松散介质坍塌堆积物的抛掷爆破过程。
By establishing the discrete element model of loose object and using ALE coupling algorithm, the simulation of loose medium's casting blast process is performed.
建立了一种空间柔性梁单元模型，推导了柔性梁单元的动力学方程和并联机器人支链的动力学方程。
A model of spatial flexible beam element was proposed, and the dynamic equations of elements and branches of the parallel manipulator were derived.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
在平截面假定的前提下，将钢筋混凝土L形柱划分为两端弹塑性区、中间为弹性区的三分段杆单元模型。
On the hypothesis of plane cross section, L-shaped reinforced concrete column was divided into three fragment line element of elastoplastic zone at both ends and elastic zone in the middle.
本文建立了适合框架结构倒塌分析的离散单元模型，并且研究了模型的破坏准则、阻尼等参数确定方法。
In this paper, a discrete element model for collapse simulation of frame structures is developed. The failure criterion and determination of analytical parameters such as damping are also studied.
这种器件的结构和功能非常类似于人工神经单元模型，所以非常适于在神经电路和神经网络系统中应用。
This function is exactly what is needed for an artificial neuron model to work and the device is no doubt most suitable to construct neural networks.
建立了反映气门运动的粒子阻滞模型、障碍物单元模型以及贴体气门模型，并提出计算粒子阻滞的修正公式。
The particle valve model, obstacle cell valve model as well as the body fitted valve model representing the valve motion were established.
建立了反映气门运动的粒子阻滞模型、障碍物单元模型以及贴体气门模型，并提出计算粒子阻滞的修正公式。
The particle valve model, obstacle cell valve model as well as the body fitted valve model representing the valve motion were established.
应用推荐