本文主要对某专用协议控制器芯片的测试验证系统进行了设计与研究。
In this paper, a test system is designed and researched mainly which is used to test the application specific protocol controller.
介绍了SCSI总线协议,以及SCSI总线协议控制器FAS368M的结构。
This paper introduces SCSI protocol and the structure of SCSI protocol controller-FAS368M.
传入的超文传输协议(HTTP)请求进入控制器。
Incoming Hypertext Transfer Protocol (HTTP) requests come into the controller.
在大部份时候,控制器是一个委托且可以实作各种委托协议,以便可以接收来自多个物件的事件。
In many cases, a controller is a delegate and can implement several delegate protocols to receive events from multiple objects.
介绍MODBUS协议是应用于电子控制器上的一种通用语言,它已经成为一通用工业标准。
As a general language applied in electronic control devices, MODBUS protocol is a general industrial standard already.
所有可编程控制器(plc)和处理器应采用植入目标链接(ole)的过程控制(opc)协议,以便与中央控制和数据处理系统的通讯。
All Programmable Logic Controllers (PLC) and Processors shall use Object Link Embedded (OLE) process control (OPC) protocol to facilitate communication to a central control and data processing system.
这一部分主要包括多功能主控制器(MFMC)内嵌软件实现和各部分通信的通信协议的制订。
The design of embedded software of MFMC and the communicating protocols about all communications in digital laboratory system are included in this part.
虽然软件实现CAN协议是基于AT 90s8515的,但其软件设计思想也可供其它微控制器参考。
Though realizing can protocol by software is based on AT90S8515, software design idea can be referred by other microcontrollers.
最后提取主要的功能码以达到简化协议、增强控制器性能的目的。
Finally the main function codes are extracted to simplify the protocol and to enhance the performance of the controller.
通过对SCSI控制器相关寄存器的设置和SCSI协议扩展消息的交互,实现了主机存储通道的数据传输速度达到160MB/s。
The speed of data transfer between SCSI devices is upto 160MB/s implemented by the setting of registers in the SCSI controller and the intercourse of expended SCSI protocol messages.
本文简要介绍了USB2.0协议层的通信原理,描述了USB2.0主机端控制器核心部分的划分、设计及实现。
This paper introduced the communication principle of USB2.0' protocol layer and the division, design and realization of the core part of USB2.0' host port controller.
该系统应用了MCS - 51系列的单片机,研制出通讯控制器和加油控制机,主机通过串行通信协议来对加油进行控制和监测。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求,设计了该车的TT CAN协议。
TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
通过此协议,控制器之间、控制器经由网络和其它设备之间可以通信。
The controller can communicate with the network and other equipment through the modbus protocol.
基于DF - 1协议,采用罗克韦尔公司的控制器和罗克韦尔软件,对交通灯控制实验进行了设计及实现。
Based on DF1 protocol, the design and realization of traffic lights control experiment were studied using Rockwell controller and Rockwell software.
第三章详细阐述了GPIB控制器的十种接口功能及其状态机实现,完全遵循ieee- 488协议规范。第四章对数据通路进行了较为细致的说明。
Chapter three introduces the GPIB controller interface function, especially the designing of state machine according to IEEE-488. Chapter four introduces the designing of data channel.
CAN总线接口采用协议控制芯片SJA1000,配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
文中介绍了EPP接口协议、包捕获控制器的EPP接口电路设计和PC机上的EPP实现程序。
This paper presents EPP protocol, the EPP circuit design of packet capture controller and the PC's EPP programming.
介绍了MKS压力控制系统的组成、651c控制器的通信命令参数、串行通信协议宏的构造方法。
The composition of MKS pressure control system, the communication commands and parameters of 651c controller and the method on building serial communication protocol macro are all introduced.
该协议可以用于开始会话、邀请成员参加由其他方式做广告的会话,或者利用多点控制器开始多方通话。
The protocol may be used to initiate sessions, invite members to sessions advertised by other means or initiate multiparty calls using a multipoint control unit.
在网络结构中建立的利用控制器网络协议的分布式微处理控制器减少了组装系统所必需的配线和连接。
Distributed microprocessor controllers established in a network configuration utilizing controller network protocols reduces the wiring and connections necessary for the assembled system.
发送器,致动器和可编程序控制器间信息交换用文件传送协议总线。数据链层。
Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.
本文首先对蓝牙技术进行了概括性的介绍,重点介绍了主机控制器接口(HCI)协议,并对HCI流程进行了剖析。
In this paper, the Bluetooth technology is generally introduced, and the emphasis is put on the introduction to Host Controller Interface (HCI).
通过HCI进行蓝牙主机与主机控制器之间通信,可以避免深入研究蓝牙低层传输协议而建立起蓝牙无线连接。
It does not need to study complicated details of Bluetooth specification that create communication between Bluetooth host and host controller via HCI.
该总线桥是某型协调控制器系统的通讯核心,实现了系统下层的背板总线、背板总线管理器与上位机epp并口之间的协议转换以及通讯仲裁功能。
This bridge is the core of communication of the controller system, it connects the bottom level backplane bus, backplane bus controller, and PC EPP parallel port.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求,设计了该车的TT CAN协议。
A TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
这种通讯协议和电容式触摸控制器的整合也使得电子工程师非常容易建立一个集成的控制面板。
Such integration of communication protocols with capacitive touch controllers also enables electronic engineers to easily create an integrated control panel.
介绍了TMS320C5402芯片与RTL8019AS互联网控制器的硬件接口电路的设计,实现了一个运行在TMS320C5402上的小型嵌入式TCP/IP协议栈。
The design of hardware interface between TMS320C5402 and RTL8019AS is described, implemented a minor embedded TCP/IP protocol which was running on the DSP chip is implemented.
电容式传感器和电容式触摸屏控制器现在支持标准汽车通信协议,如局域互联网络(LIN)和控制器局域网络(CAN)。
Capacitive sensors and capacitive touchscreen controllers now support standard automotive communication protocols like Local Interconnect Network (LIN) and controller Area Network (CAN).
本文研究了US B主控制器协议,并分析了USB技术应用于智能仪表的技术可行性。
The protocol of USB Host Controller is analysed and the application of USB technique to intelligent instruments are introduced.
应用推荐