并且，在任一个浇满了熔银的坩埚中，银原子中的电子一半是向上转,另一半是向下转。
And, in any arbitrary crucible full of molten silver, half of them are going to be spin-up and half of them are going to be spin-down.
半湿物料粘壁主要与喷雾干燥塔结构、雾化器结构、安装、操作以及热风在塔内的运动状态有关。物料熔点低于干燥温度时容易产生热熔性粘壁。
The wall sticking of half wet material is concerned to the structure, fixing and operation of spray drying tower and sprayer, the motion of hot air in tower.
研究方法和主要成果如下：使用电阻炉熔炼a356铝合金，并采用斜坡冷却法进行半固态熔体的制备。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
针对黄河泥沙质陶瓷酒瓶坯体的装饰展开研究，采用低温一次快烧工艺，研制了一系列熔块及半熔块釉。
Based on the research of body decoration on the ceramic wine bottle made with Yellow River silt, a series of semi-frit glaze was made.
通过比较半固态加压除气的试样在重熔前后的高度变化，建立了增强颗粒粒径与复合材料熔体表观粘度间的关系。
Comparing the height changes of composites before and after remelt which have been degassed with semisolid compression, the relation between apparent viscosity and reinforcement diameter was obtained.
结合铝合金半连续铸造的生产工艺，介绍了铸造铝熔体液面的控制措施以及每种控制措施的实践效果。
Aluminium metal level control measures and practice effects during casting are introduced in detail according to the processes of aluminium semi-continuous DC-casting.
研究了控制熔体结晶法制备的半固态zl101合金的压缩变形行为以及显微组织的变化。
Compression experiments were carried out to investigate deformation behavior and microstructure of semi-solid ZL101 alloy fabricated by controlled crystallization technique.
研究了AZ61镁合金在应力诱发熔体激活法(SIMA)制备半固态坯料过程中预变形量、等温温度和保温时间对其组织的影响。
The microstructure of AZ61 magnesium alloy by strain-induced melt activation (SIMA) process was studied to reveal the effects of prior compressive deformation, isothermal temperature and holding time.
从非枝晶坯料的制备、坯料的重熔加热和半固态的成形工艺等三方面介绍镁合金半固态成形的研究现状。
The present status of the research of Mg alloy semi-solid processing from three aspects including the preparation of non-dendritic structure, reheating and semi-solid processing were described.
采用稀土处理ZL 104铝合金，研究了稀土对铝合金半固态重熔加热过程中组织变化的影响。
Al-alloy ZL104 was treated with rare earth, and the effects of re on the structure of semisolid Al-alloy during reheating were investigated.
利用模拟退火方法研究非对称半结晶两嵌段共聚物熔体分别在弱分离和强分离条件下的结晶过程。
A simulated annealing method is used to study the micro phase separation and crystallization in cylinder-forming semicrystalline diblock copolymers.
对在两相区铸造进行半固态制浆所得az91 D镁合金坯料的部分重熔工艺条件及组织演变进行了研究。
The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.
研究了镁合金熔体在半固态温度区间进行不同扰动处理后铸件的组织特征。
The microstructure of magnesium alloy melt under different disturbed treatment in semisolid state was studied.
在挤出过程中，以熔体破裂形式出现的挤出物的缺陷只有在PP熔体处于半固体状态时才能观察到。
The defect of extrudate in the extrusion process in the form of melt fracture could only be evidenced in the semisolid state of PP melt.
采用在底流式镁合金熔炼炉中施加不锈钢丝网过滤的方法在半连续铸造工艺中实现镁合金熔体净化，以达到提高镁合金锭坯质量的目的。
In order to improve the quality of magnesium billets, magnesium melt for DC casting was purified by using stainless steel mesh in the magnesium melting furnace with bottom apex.
研究了不同工艺参数的半连续铸造工艺对铸锭组织及可锻性的影响，并将常用于改善铸钢组织性能的电渣重熔工艺引入B30铜合金铸造。
The effects of semicontinuous casting process with different technological parameters on the ingot microstructure and forgeability of B30 alloy were studied.
最好热熔油墨有固体和液体之间的尖锐过渡期的温度升高，从而结晶或半结晶运载工具是可取的。
Preferably the hot melt ink has a sharp transition between solid and liquid phase as the temperature is raised and hence crystalline or semi-crystalline carrier vehicles are preferable.
最好热熔油墨有固体和液体之间的尖锐过渡期的温度升高，从而结晶或半结晶运载工具是可取的。
Preferably the hot melt ink has a sharp transition between solid and liquid phase as the temperature is raised and hence crystalline or semi-crystalline carrier vehicles are preferable.
应用推荐