介绍了以半桥串联逆变谐振电路P。
On the basis of halt-bridge, series, converting-resonant circuit P.
介绍了半桥型开关稳压电源的原理。
The theory of the half bridge switching mode power supply is introduced.
采用半桥式逆变器和IGBT控制技术。
Applying half bridge inverter and IGBT controlling technology.
文中介绍了采用单相半桥电路实现可逆整流的方法。
A method is introduced that reversible rectification can be realized with single-phase half-bridge circuit in this paper.
介绍了一款基于PWM技术的半桥式开关稳压电源。
A half bridge switching mode power supply (SMPS) based on PWM technology is introduced.
文章讨论了一种带有ZVZCS的单级PFC半桥变换器。
The paper discussed a half-bridge converter of single-stage PFC with ZVZCS.
提出了一种新型半桥电流源型串联谐振零电流三电平逆变器。
A novel current mode series-resonant ZCS three-level half bridge inverter is proposed.
不对称半桥工作在软开关模式可以减小开关损耗，提高电源的效率。
An asymmetrical half-bridge operation in soft switching mode can reduce switching power loss and improve the efficiency of power supply.
介绍了一种半桥逆变式电子束焊机高压电源的工作原理和控制电路。
This paper introduces the working principle of high voltage source with half-bridge inverter for electronic beam welder.
由于设计采用了不对称半桥结构，提高了系统主功率电路的容错性。
The system adopts asymmetry half bridge structure, which makes the main power converter fault tolerant.
它看上去让人迷惑，网格状的半桥悬浮在半空中，多少有些超现实主义画作的味道。
It was disorienting to look at that latticed half-bridge leaving off in midair like some sort of Surrealist painting.
两个“半桥”受力时输出信号的极性相反，而零压时输出信号极性相同。
The output polarities of the two half-bridge are opposite as putting pressure on the sensor, and the output polarities are the same without pressure on the sensor.
该电路拓扑族包括单四象限功率开关式、推挽式、半桥式、全桥式等四种电路。
The circuit topologies family include single four-quadrant power switch mode, push-pull mode, half-bridge mode, and full-bridge mode circuits.
该电路拓扑族包括单四象限功率开关式、推挽式、半桥式、全桥式等四种电路。
The circuit topologic family includes circuits of single four-quadrant power switch mode, push-pull mode, half-bridge mode. and full-bridge mode.
该文研究了一种基于电流滞环控制的半桥双降压式逆变器输出滤波器的设计方法。
In this paper a design method of half bridge dual buck inverters output filter based on hysteresis current control was presented.
该芯片采用半桥式拓扑结构，由积分器、比较器、驱动输出级以及反馈网络组成。
The designed IC is based on the half bridge topology, and consists of integrator, comparator, output stage and feedback.
并通过零位调节和满量程调节，在实际上使两个半桥的满量程相等，零位近似为零。
The two semibridge were equal in full span and zero pressure output value was equated to zero nearly by adjusting zero pressure output and full span.
提出了一种新型的不对称半桥零电流准谐振型逆变电源，给出了谐振元件的计算方法。
In this paper, a novel ZCS quasi-resonant inverter power with asymmetrical half-bridge topology is presented, and the calculating method of resonant elements is given.
焊接式半桥自补偿高温应变片的应用，为确保机组高效率、长寿命的特性提供必要的依据。
The use of the welded half-bridge self-compensating high temperature strain gauges has provided a firm basis for ensuring a high efficiency and a long life feature for the power unit.
现代高功率因数电子镇流器结构中普遍采用功率因数校正（PFC）和半桥逆变谐振电路拓扑。
The power factor correction (PFC) and half-bridge inverter circuit topology are commonly used in modern high power factor electronic ballasts.
通过用扁平变压器设计半桥式变换器的实例，说明其设计方法和步骤，并对设计结果进行了分析。
The design method and steps are demonstrated by designing a half-bridge Buck converter with a flat transformer. Flat transformers can be used in varied electrical products.
基于充电机安全性能，功率等级以及应用场合的考虑，主电路拓扑选用的是带隔离的半桥逆变电路。
In consideration of safety performance, power rating and applications of the recharger, the isolated half-bridge converter circuit is adopted in the main circuit topology.
同时，在相同的电源电压下，BTL输出信号摆幅是半桥式放大器的2倍，因为负载是差分驱动的。
With the same supply voltage, the BTL signal output range is 2 times of Half-bridge amplifier due to the load with differential drive.
本文阐述了不对称半桥逆变器的工作原理，讨论了软开关的实现条件，给出了谐振滤波器的设计方法。
The operational principle of the inverter is analyzed and the ZVS achievement condition is discussed. The design method for the resonant filter is provided.
IR2167是集功率因数校正器（PFC）、镇流器和半桥驱动器为一体的新型电子镇流器驱动电路。
The IR2166/IR2167 are such IC that PFC, ballast control and half-bridge driver are made in one IC.
利用MOS管、半桥驱动芯片LM27222、栅极驱动变压器等器件，设计了变极性矩形波发生电路。
A rectangular wave generating circuit has been designed with MOSFETs, half bridge driver chip LM27222 and gate drive transformer.
对于桥路的选择作了分析，认为半桥连接比全桥连接的干扰电平低，建议在应变测试中采用半桥连接电路；
The author believes that the interference level cau- sed by a semi-bridge connection is lower than that by a fully-bridged connection, and a semi-bridge wiring plan is better suited for strain tests.
依据一个半桥逆变电路的实例详细介绍了高频变压器设计的一般方法和步骤，并讨论变压器损耗和温升问题。
The method of design high frequency transformer in half bridge inverter circuit is introduced exampled in detail, besides temperature rise and power loss are discussed.
依据一个半桥逆变电路的实例详细介绍了高频变压器设计的一般方法和步骤，并讨论变压器损耗和温升问题。
The method of design high frequency transformer in half bridge inverter circuit is introduced exampled in detail, besides temperature rise and power loss are discussed.
应用推荐