本文提出一种提高半导体电阻式气敏元件选择性的新方法。
A new approach to improve the selectivity of semiconductor gas sensors is put forth.
本文报导了用微波介质波导反射法无接触测量半导体电阻率的实验装置。
We have designed a contactless measurement apparatus by a microwave dielectric waveguide reflection method.
结果表明：随着触媒中碳化硼添加量的增加，含硼金刚石单晶的电阻率降低，可呈现半导体电阻特性。
The results show that the specific resistance of the boron-doped diamonds significantly decreased with the increase of boron concentration and to be a semiconductor.
向开关加上电压会促使带电的泡沫从金属中向上移动，这样从根本上降低了半导体的电阻和使它变成一整套的导体。
Applying a voltage to the device pushes charged bubbles up from the metal, radically reducing the semiconductor's resistance and making it into a full-blown conductor.
Hla说(金属线)是可能在半导体或绝缘体上制作的，从而进一步证明电子是沿着电线无电阻导电。
Hla said (metal wire) is probably produced in the semiconductor or insulator and thus further evidence of the electronic conductivity along the wires without resistance.
Hla说(金属线)是可能在半导体或绝缘体上制作的，从而进一步证明电子是沿着电线无电阻导电。
Hla said (metal wire) is probably produced in the semiconductor or insulator, and thus further evidence of the electronic conductivity along the wires without resistance.
Hla说(金属线)是可能在半导体或绝缘体上制作的，从而进一步证明电子是沿着电线无电阻导电。
Hla says it should be possible to grow the wires on semiconductors or insulators as well and prove that electrons superconduct along the wires.
金属探头与半导体接触时的电阻可能相当高。
The resistance of the metal probe to semiconductor contact can be quite high.
这类器件包括各类半导体光敏电阻。
Such devices include various types of semiconductor photosensitive resistance.
在有些应用中，例如监测电化电池和测量半导体的电阻系数，则可能必须进行高阻抗电压切换。
High impedance voltage switching may be necessary in applications such as monitoring electrochemical cells and measuring semiconductor resistivity.
本文利用扩展电阻技术对半导体硅、硅基材料进行测试分析，从而用以开发新材料和评估材料的质量。
We use spreading Resistance technique to test and analyze silicon and silica base materials. This technique is more suitable to control material quality and develop new materials.
已经设计出专门的探头来测量半导体晶圆片和半导体棒的电阻率。
Special probes have been designed for making resistivity measurements on semiconductor wafers and bars.
数字逻辑门电路作为集成电路被制造：所有组成的晶体管和电阻建立在一块半导体材料上。
Digital logic gate circuits are manufactured as integrated circuits: all the constituent transistors and resistors built on a single piece of semiconductor material.
讨论了在检测半导体器件和集成电路芯片时，不同研磨倾斜角度对扩展电阻量值的影响。
The effects of choosing lapping bevel Angle during testing semiconductor devices and LSI chips by spreading resistance technique on measurement accuracy have been investigated in this paper.
轻型（半导体），或者是客，一头、照片登记在另一端的电阻状态。
A light (diode), is on or off, at one end, and a photo-resistor at the other end registers its state.
热敏电阻是一种半导体元件，它的电阻随温度而变化。
Thermistors are semiconductor devices whose resistance varies with temperature.
本文介绍用四探针技术测量半导体薄层电阻的新方案。
A new method for measuring sheet resistance of semiconductor using four-point probe has been developed.
这套系统可以用于研究高电阻的材料，例如在半导体基体上的绝缘薄膜，DLC和压电薄膜，导电聚合物等。
This system can be used in research of high-resistance materials such as thin dielectric layers on semiconductors, DLC and piezo-films, conductive polymers etc.
本发明能够减少半导体装置的寄生电阻。
The invention can reduce parasitic resistance of the semiconductor device.
和其它磁场传感器如霍尔器件、半导体磁敏电阻相比，AMR传感器具有灵敏度高、温度稳定性好、体积小等优点。
Compared with other magnetic sensors such as Hall elements, semiconductor magnetoresistance elements, the AMR sensors have advantages of high sensitivity, good temperature stability and small volume.
介绍一种采用比值采样测量半导体温度电阻的测量方法。
A method is presented for measuring semiconductor resistor using ratio sampling techniques.
因此，在半导体行业中，必须快速、准确地对硅晶圆片导电类型、方块电阻和电阻率进行判断、测量和分档。
Therefore, in the semiconductor industry, we must quickly and accurately type conductive film on silicon wafers, the square resistance and resistivity of judgement, measurement, and grading.
本文提出一种用直线四探针头测量金属-半导体欧姆接触接触电阻率的简捷方法。
In this paper, a simple method to measure the specific contact resistance of metal-semiconductor ohmic contact is developed, using the probe heads of the inline four probes.
半导体制成的电阻，随温度可迅速变化，并可预测。
A resistor made of semiconductors having resistance that varies rapidly and predictably with temperature.
运用QSPM矩阵分析，得出“剥离低压、半导体瓷介电容器，开发压敏电阻和新型军用元器件产品”的战略。
Applying QSPM matrix analysis, to get the strategy of "Peel off low voltage and semi-conductor ceramic capacitor, develop new type varistor and new type military components".
通过适当调节最大限制电流或采样电阻，该电流源可应用于各种型号的中小功率半导体激光器。
The precision LD current driver can be used in many kinds of small-medium power LD by adjusting the maximum limited current or the sampling resistance.
研究了硅衬底导电率变化对金属绝缘半导体传输线的分布电阻和分布电感参数的影响。
Examples are given to illustrate that the change of silicon substrate conductivity affects distributed parameters of MIS transmission line.
适用于中温烧成制作特种电路的内部连线及端头引出线，PTC热敏电阻及半导体陶瓷器件电极等。
Firing temperature for the production of special circuits in the internal connection and End Lead, PTC thermistors, and semiconductor ceramic device electrodes.
本文从半导体陶瓷PT C热敏电阻器入手，讨论了该热敏材料的电阻温度特性，给出了PT C热敏电阻器的测量结果和应用范围。
Starting with ceramic PTC thermal sensitive resistor of semi-conductors, the temperature characteristics of the resistance of its thermal materials are discussed.
电阻率随温度升高而下降，呈现半导体特性。
The resistivity shows a continual decrease with the increase of temperature.
应用推荐