采用电化学腐蚀法对6种牙科合金进行了实验研究。
The electrochemical corrosion method was taken to study 6 kinds of dental alloys.
用常规化学腐蚀法显示出单晶硅中的缺陷，观察典型的位错。
By using the routine chemical corrosion, show the defect of the Monocrystalline Silicon; find the typical linear deranged.
制作光纤耦合器的方法有化学腐蚀法、研磨法和熔融拉锥法。
The making methods of optical fiber couplers have chemical corroding, grinding and fused biconical taper method.
用光学法和化学腐蚀法研究了晶体的缺陷，并分析了缺陷成因。
The crystal defects were studied by optical method and chemical etching method.
方法：电化学腐蚀法测试镍铬合金用有机金浆涂覆前后的腐蚀行为。
Methods: The corrosive resistance of ni - Cr alloy was tested by electrochemical method before and after coated with organic gold paste.
为了降低光在多晶硅表面的反射，采用化学腐蚀法在其表面制备了绒面。
The chemical etching method wa applied to form surface texture of multicrystalline silicon in order to reduce the reflectance of the surface.
采用同步辐射形貌术结合化学腐蚀法，系统研究了NYAB和NGAB晶体中的孪晶结构。
The twins in NYAB and NGAB crystals were investigated by synchrotron radiation topography and chemical etching method.
基于虹吸原理，设计了一种动态化学腐蚀法的简易装置，用于制备近场光学显微镜光纤探针。
A simple dynamic chemical etching device based on siphon principle is developed for fabrication of optical fiber probes which are commonly used in near-field optical microscopy.
采用化学腐蚀法，通过控制有机酸腐蚀后焊料烘干的氧分压和温度控制焊料表面氧化层厚度。
Chemical removal approach is utilized and the oxide thickness is controlled by controlling the oxygen pressure and temperature during solder drying after organic acid removal.
在对试验水样进行水质化学分析后，采用稳定指数法，对水样的腐蚀与结垢趋势进行了判断。
After chemical analysis of the experiment water, the tendency to corrosion and scaling was analyzed by a stable indicator.
叙述了涂层金属耐腐蚀性的几种电化学测定方法，例如直流电阻法、交流阻抗法、电位时间法、充电曲线法。
Several electrochemical determination methods to test the corrosion resistance of coated metals were described, such as DC resistor, AC resistor, potential time and charging curve.
采用电化学极化和失重法研究了纯铜管、304不锈钢管于开口、低氧密闭两种状态下在不同浓度氨溶液中的腐蚀性能。
The corrosion performance of tubes of copper and 304 stainless steel in ammonia solutions with different ammonia concentration are studied by electrochemical polarization and weight-loss method.
通过失重法、电化学方法研究低合金钢镀膜前后在不同腐蚀介质中的耐蚀行为。
The anti corrosion behavior in different corrosion environments was studied by weight loss test and electrochemical method.
采用失重法和电化学方法对铜在模拟苦咸水溶液中的腐蚀电化学行为进行了研究。
The electrochemical behaviors of copper in the simulating bitter and brackish solution was studied using weight method and electrochemical techniques.
利用电化学阻抗法和失重法，研究了X70钢在卵石黄泥土中的盐浓差宏电池腐蚀。
Salt concentration difference macrocell corrosion of X70 steel in yellow pebble soil was studied by means of EIS and weight loss method.
极化曲线外推法和电化学阻抗研究都表明纳米晶铜的腐蚀电流比微米晶铜高，而极化电阻要低。
Both the Tafel plots and EIS study demonstrated that the nc copper exhibits a higher corrosion current and lower polarization resistance than its mc couterpart.
充电曲线法是一种快速而有效的评价涂料防腐蚀性能的电化学方法。
It indicated that the evaluation of corrosion protection properties of the coating film by the electrochemical approach has the features of fastness, accuracy and ease.
然后，在人工唾液中用电化学测试法对其腐蚀情况进行实验研究。
Then, we should do experiment research about corrosion resistance by electrochemical method.
采用双环电化学动电位再活化法(EPR法)研究316l奥氏体不锈钢扩散连接试样与母材的晶间腐蚀行为。
Intergranular corrosion for diffusion bonded joints and base materials of 316l stainless steel was investigated by double loop EPR test.
用电化学参数法研究石油磺酸盐对A3钢的腐蚀电流与其浓度的关系。
The relation between concentration of PS and corrosion current is studied by method of polarization curve.
应用电化学弱极化法和原子力显微镜（AFM）研究了咪唑啉衍生物类缓蚀剂在模拟深层气井水溶液中对碳钢的二氧化碳腐蚀的抑制效果和缓蚀作用机理。
The electrochemical method and atomic force microscope(AFM) were applied to study the inhibition mechanism of Im-D, an imidazoline derivate inhibitor, for mild steel in CO2 saturated solution.
应用电化学弱极化法和原子力显微镜（AFM）研究了咪唑啉衍生物类缓蚀剂在模拟深层气井水溶液中对碳钢的二氧化碳腐蚀的抑制效果和缓蚀作用机理。
The electrochemical method and atomic force microscope(AFM) were applied to study the inhibition mechanism of Im-D, an imidazoline derivate inhibitor, for mild steel in CO2 saturated solution.
应用推荐