为解决该问题，首先从冷凝器各个结构的化学成分分析着手。
In order to solve the problem, first of all, the study from the chemical composition of various structures of the condenser to proceed.
采用宏观、微观检验、化学成分分析等方法，对失效件进行了检测。
The failure components were examined by macro and microscopical analysis and so on.
本文介绍了用矿石化学成分分析数据换算成硅灰石含量的具体步骤。
The paper has introduced the method of using the analytical data of chemical composition of the ore in conversion of the wollastonite content.
根据煤灰化学成分分析结果，参照矿物标准成分推算各矿物相在煤灰中的含量。
Based on the results of chemical analysis of the coal ash, with reference to the standard composition of minerals the content of various mineral phases in the coal ash has been determined.
采用扫描电镜、光镜、化学成分分析和显微硬度测试等方法对断裂件进行了分析。
The fractured springs were analyzed by means of SEM, metallography, chemical composition analysis and microhardness measurement.
采用金相分析和化学成分分析方法，对弹性压簧在性能测试时出现断裂进行了分析。
Uses the metallography analysis and the chemical composition analysis method, presses the reed to the elasticity when the performance test appeared the break to carry on the analysis.
采用化学成分分析、电镜扫描等方法，对出现裂纹的换热器板片样品进行了逐项分析。
By chemical composition analysis, SEM and other analytical methods, the cause of cracking of plate heat exchanger was investigated.
采用宏微观检验、化学成分分析及力学性能测试方法对截止阀阀体爆裂原因进行了分析。
This paper studied the causes of bursting of stop valve by the methods of visual inspection, metallographical examination, chemical analysis and mechanical property test.
结果一般化学成分分析中代料灵芝的蛋白质含量14.34%，是段木灵芝的1.6倍。
Results Content of protein in Tubecultivated Ganoderma lucidum is 14.34% which is 1.6 times of wood log cultivated Ganoderma lucidum.
采用低倍组织试验、化学成分分析及金相检验等方法，对出现边裂的带钢卷进行了解剖分析。
Structure testing in low magnificution, chemical composition analysis and microstructure examination were used to analyze the edge cracking of strip steel coil.
通过现代分析测试手段，对脑细胞激活素进行化学成分分析，以更好地研究该药的药理作用。
The chemical content of injectio cerebral cell active factor, was determined by modern analytic determination methods, inorder to study pharmacologic work better.
采用低倍检验、金相检验及化学成分分析等方法对火车轮箍机加工出现裂纹的原因进行了分析。
Methods such as macroscopic evaluation, metallography examination and chemical composition analysis were used to study the forming reason of crack in machining process of tyres for train.
采用宏观断口分析、化学成分分析及金相检验等方法，对发动机排气门杆断裂原因进行了分析。
By means of macroscopic analysis, chemical composition analysis and microstructure examination, the cracking reason of engine exhaust valve stem has been studied.
对剃齿刀断口进行了宏、微观检验、化学成分分析、硬度测试和非金属夹杂物及显微组织检验。
Micro-analysis of the Internal Control Performance System of Capital Operation of State-owned Commercial Banks Based on Data Validation;
本文介绍采用通过化学成分分析、硬度测定及金相组织检测等手段，对轴承损坏原因进行分析的情况。
This paper has described and analyzed the reason of the damaged bearing by means of chemical analysis, the determination of the hardness as well as the metallographic analysis.
例如，技术人员可以通过其化学成分分析其创作日期，或者对一幅画做X光透视，揭示其表面下有什么。
Technicians can date paint from its chemical composition, for example, or X-ray a canvas to reveal what lies below the surface.
对燃气轮机二级动叶片失效件进行了化学成分分析、金相组织观察、晶粒度测定、夹杂物检查及断口分析。
In this paper, the chemical contents, microstructure, inclusion, grain size and fracture analysis of the second grade gas turbine blade were investigated.
通过化学成分分析、硬度试验、宏观和微观检验等方法，对减速机齿轮齿面弧形裂纹的产生原因进行了分析。
The reason of arc crack on retarder gear surface was analyzed by means of chemical composition analysis, hardness testing, macrostructure and microstructure examination.
主要研究工作包括化学成分分析、微量元素及微生物学分析、环境对食品工业的影响、海洋生物圈的监测等。
Analyses are made on chemical composition, trace elements, microbiological analyses, environment impact of food products, monitoring the Marine biosphere.
通过化学成分分析、力学性能测试、金相检验以及断口分析等方法对SKD61钢压铸模具开裂原因进行分析。
The cracking causes of the die casting mould of SKD61 steel were analyzed by chemical composition analysis, mechanical property testing, microstructure examination and fracture analysis.
采用化学成分分析、力学性能测定、金相检验以及断口宏、微观分析等方法，对钻井泵齿轮轴断齿进行了分析。
Fracture tooth of gear shaft in well drilling pump was analysed by chemical analysis, mechanical testing metallographic examination macro and microfractography.
采用宏微观形貌分析、化学成分分析、力学性能测试、SEM微观形貌分析等手段，分析了减速机轴断裂的原因。
The fracture reason of reducer shaft was analyzed by means of morphology and microstructure analysis, chemical composition analysis, mechanical properties test, SEM micro-morphology analysis.
采用化学成分分析、宏观和微观组织检验以及力学性能测定等方法对在使用过程中发生开裂的包胶辊进行了分析。
The cracking encapsulated roller in use was analyzed by means of chemical composition, macrostructure and microstructure examination and mechanical property test.
结合不锈钢分公司炼钢生产工艺特点，着重介绍了检化验全自动快速分析系统在宝钢钢铁化学成分分析中的应用。
Combined with production process feature of steelmaking in Stainless steel Branch, application of full automatic quick analysis system in steel chemical composition analysis of Baosteel is introduced.
采用宏观检查、扫描电镜、X射线能谱、金相检验、化学成分分析等方法，对金属波纹软管开裂的原因进行分析。
The methods of visual inspection, SEM, X-ray EDS, metallography and chemical composition analysis were adopted to research the rupture of flexible metal hose.
海产品样本还进行了化学成分分析，目的就是样本中是否含有英国石油公司在石油泄漏海域喷洒的碳氢化合物及石油分解剂。
Seafood samples are also chemically analyzed for hydrocarbons and the dispersant BP sprayed on the oil slick.
采用化学成分分析、力学性能测试、显微组织观察和夹杂物检验等方法对有边缘裂纹的Q 345 B宽带钢进行分析。
The edge crack on Q345B wide strip steel was analyzed by means of chemical composition analysis, mechanical property testing, micro metallographical examination.
采用化学成分分析、金相分析、断口扫描电镜及电子探针分析等手段，对4 5钢棒材冷拔断裂的原因进行了分析研究。
The fracture reason of 45 steel bar during cold drawing was analyzed by chemical inspection, metallographic examination, scanning electron fractograph and electron probe analysis.
采用化学成分分析、金相分析、断口扫描电镜及电子探针分析等手段，对4 5钢棒材冷拔断裂的原因进行了分析研究。
The fracture reason of 45 steel bar during cold drawing was analyzed by chemical inspection, metallographic examination, scanning electron fractograph and electron probe analysis.
应用推荐