运用经典的哈密顿正则方程，建立了冲击式压实机的参数化动力学模型。
The parameterized dynamic model of the impact compactor is made based on the classical Hamilton's canonical equations.
应用富营养化动力学模型以及随机模拟法对汉江水华发生的概率进行了定量计算。
The probability of Hanjiang's water bloom was calculated quantitatively by applying dynamic model of eutrophication and stochastic analogy method.
首次从无规双相各向异性模型和快速循环退火法两方面入手，建立了RRTA纳米晶化动力学模型，给出了软磁薄膜的磁电性能与纳米晶化工艺的关系。
The crystallization kinetics model is established by using a random two-phase anisotropy film. The influences of RRTA parameters on magnetic and electric properties of soft-magnetic are studied.
并利用离散化的方法建立了串联盘式管道连续输送机传动系统在无阻尼情况下的动力学模型。
Besides, the dynamic model in driving system of the conveyer is established with through scattered method on no damping occasion.
卫星姿态动力学系统与其线性化模型之间的误差会影响姿态控制的精度。
The error between satellite attitude dynamics and its linearized model can affect the attitude control precision.
反应是在固定床的条件下进行的，通过建立稳态反应模型，求出了异构化反应网络中的每一步动力学参数。
The reaction took place in the fixed bed reactor. By using steady state model, each step kinetic parameter in the reaction net was acquired.
对模型参数的最佳评价通过最小化模型模拟和实验测定间的药物释放动力学差别来获得。
Optimal estimates of the model parameters were obtained by minimizing the difference between model simulation and experimentally measured drug release kinetics.
通过动力学分析，建立了车型弹性倒立摆系统的动力学控制模型，并对系统进行了线性化和可控、可观性分析。
Its dynamic control mode of vehicle tyre is derived by dynamics analysis, and the linearization, controllability and observability of the system are analyzed.
方法：建立C6/SD大鼠胶质瘤模型后，应用流式细胞仪检测、免疫组化、HE染色三种方法，研究C6胶质瘤细胞的增殖动力学指标。
Methods: After establishing a C6/SD glioma model, by using flow cytometric analysis, immunohistochemistry and HE stain three methods, the proliferation kinetics in C6 glioma cell was measured.
采用等温积分反应器，测试了KD306型耐硫甲烷化催化剂的本征动力学，建立了幂函数动力学模型。
The intrinsic kinetics of KD306 type sulfur tolerant methanation catalyst was studied in an isothermal integrated reactor and the reaction model of power functions type was established.
提出了一种理论模型以计算原子化的动力学级数和活化能。
A theoretical model has been proposed to calculate the kinetic order and the activation energy for atomization.
吸附固定化微生物对DBP的降解符合一级反应动力学模型。
The degradation reaction of adsorptive immobilized microorganisms on DBP was according with the first-order model.
以单连杆弹性臂动力学模型为基础讨论转速对频率、振幅的影响，得出了动力刚化的机理，并对其是否考虑动力刚化效应时进行了数值仿真比较与分析。
The dynamic rigidity mechanism is obtained by discussing the effect of rotational speed of single connecting rod elastic arm on frequency and amplitude on the basis of dynamic model.
释药机制探讨表明：经膜控和骨架杂化控制释药的模型用一级动力学方程解释较好。
The mechanism of release results from the matrix rode and drug diffusion of matrix by describing the drug release curve using Ringer-Peppas model.
基于机械系统动力学软件ADAMS环境，对装载机工作装置中各主要杆件进行参数化，创建了装载机工作装置的虚拟样机优化模型。
The virtual prototype of the working device of loader was built under the circumstance of the software ADAMS, and the main parts were parameterized.
依据催化裂化催化剂水热失活过程伴随着超稳化过程，确定了催化剂自抑制水热失活动力学模型方程。
The kinetic model of hydrothermal deactivation and the model of unit balance activity for FCC catalyst were established.
该模型为双圆弧齿轮三维数字化设计、制造，啮合分析、运动学和动力学分析提供了新的理论依据。
This model offers a new theory for 3d numerical design, manufacture and the analysis of engagement, kinematics and dynamics of double circular arc gears.
考虑控制输入耦合，建立服务航天器对目标航天器的相对位置和姿态一体化耦合动力学模型。
Considering coupled control inputs, an integrated coupling relative position and attitude dynamic model of the on-orbit servicing spacecraft is built with respect to the target spacecraft.
焦点将在描述电化学的系统的热力学和动力学的模型化和工程接近计画。
The focus will be on modeling and engineering approximation schemes that describe the thermodynamics and kinetics of electrochemical systems.
在ANSYS中将泵的芯部运动部件柔性化，通过与ADAMS之间的数据交换，建立了泵的刚柔耦合动力学模型。
The core moving parts of the pump are changed to be flexible ones, a rigid-flexible coupling dynamic model of the pump is established through a data exchange between ADAMS and ANSYS.
提出一种新的测试聚氨酯预聚物合成反应过程中氨酯化反应和支化反应的动力学参数的理论模型 。
A theoretical model for the reaction kinetic of the urethane and branching reaction of polyurethane prepolymer is proposed.
提出一种新的测试聚氨酯预聚物合成反应过程中氨酯化反应和支化反应的动力学参数的理论模型 。
A theoretical model for the reaction kinetic of the urethane and branching reaction of polyurethane prepolymer is proposed.
应用推荐