求解动态电路一般是列微分方程，解微分方程。
The typical way to analyze dynamic circuit is writing differential equation, then obtaining the solution.
同时动态电路在速度、芯片面积等方面也比静态电路有优势。
Meanwhile , it has the advantages in speed and chip integration .
总结了冲激电源作用于动态电路后初始值求法的一些常见算法。
This paper gives a classification of conventional algorithms about how to obtain the initial values after the impulse sources are applied to the dynamical circuit.
卷积积分对于信号处理、控制理论和动态电路分析均具有重要意义。
The convolution integral is quite important in signal processing, control theory, and dynamic electric circuit analysis.
掌握并熟练应用“三要素法”会带给分析线性动态电路极大的方便。
Holp and still use "three factor law" brings a lot of facility in analyzed linearity circuitry .
本文通过对一阶非线性动态电路的研究，提出了计算其灵敏度的方法。
In this paper, the first order nonlinear dynamic circuits are studied, and the methods of calculating their sensitivity are proposed.
把复杂动态电路分割成若干个线性子电路和一组联络支路（线性和非线性）。
The algorithm divides a complex dynamic circuit into some linear subcircuits and link branches (linear and nonlinear).
结果表明，含有非线性电阻的动态电路的唯一稳态，可以用一个矩阵测度决定。
The results show that the unique steady state of the dynamic circuits with nonlinear resistors can be determined by the measures of some matrixes, which are easily constructed.
本文的结果表明，含有非线性电阻的动态电路的唯一稳态。可以用矩阵范数决定。
The main results show that the unique steady state of the dynamic circuits with nonlinear resistors can be determined by the matrix norms of some matrixes.
将线性规划方法与电路的树分解技术结合，实现大型线性动态电路中故障的迅速定位。
Linear programming approach combines with technique in tree of decomposition to realize fault location of large linear dynamic circuits quickly.
在动态电路的时域分析中，若要解出描述电路的微分方程或状态方程，首先必须知道电路的初始状态。
In the time domain analysis of dynamic circuit, the initial state must be first known when the differential equation or state equation will be solved.
本文利用微分方程单位解矩阵估计的相关方法，得到了确定含有非线性电阻的动态电路唯一稳态的条件。
Based on the estimation of the unit solution matrixes of differential equations, the unique steady state of the dynamic circuits with nonlinear resistors is studied by matrix measure.
提出了一种利用窄脉冲发生器驱动输出级，以提高电路抗噪声能力，同时保持动态电路的高速特性的多输入动态逻辑电路。
A novel circuit with a narrow pulse driving structure is proposed for enhancing the noise immunity and improving the performance of wide fan-in dynamic circuits.
阶跃函数是一种奇异函数，它在分析动态电路过渡过程中具有重要的作用，如何定义阶跃函数是正确应用其分析动态电路的关键。
As one of the singular functions, step function plays an important role in the transient analysis of dynamic circuits and its definition is the key to analyze transient circuits.
本文在基本欧拉路径方法的基础上，提出一种拓展的欧拉路径方法，使之能够应用于所有互补CMOS电路和动态电路的版图布局。
In this dissertation, we present an expanded Euler Path method, which extend the origin Euler Path method to the floor plan of all kind of CMOS circuit as well as the dynamic circuit.
利用暂态响应解的形式和电感、电容的电压与电流的关系，导出了电感和电容的等效阻抗，从而可用电路方法求解动态电路的暂态过。
The equivalent impedances of inductor and capacitor in transient response were deduced from the exponential transient solution and the volt ampere relation of these elements.
不幸的是，这个动态填补线路会使得电影内容看起来像简易的视频—就像“肥皂剧效应”一样，电路交换时产生了干扰。
Unfortunately, the motion-compensating circuitry can make filmed content appear like a cheap video-a glitch known in the trade as the "soap-opera effect".
可看出，动态分析对于复杂电路是一种有效的方法。
Obviously, the dynamic analysis of complicated circuit in an effective method.
结果表明，低通滤波器的截止频率、阶数和类型对检测电路的动态响应过程、检测精度都有很大影响。
The simulation result shows that the dynamic response and the detection precision in detection circuit can be greatly influenced by the cut-off frequency, order and type of low pass filter.
该模型考虑了换流器开关电路的动态特性，适用于高频动态特性分析。
The model considers the dynamics of converter switch circuit and can be applied in the analysis for high frequency dynamic characteristics.
建立了既考虑发电机内部非线性又考虑外部电路拓扑结构的用于系统动态分析的时步有限元模型。
The time-stepping FEM model for the dynamic analysis of power system is established considering the nonlinear characteristics of internal generators and typology structures of external circuit.
试验结果证明，本驱动电路能够很好的实现正常驱动、动态关断以及短路保护等功能。
Experimental results prove that the designed driver can realize drive, dynamic turn-off and short-circuit protection and so on.
介绍了利用VHDL硬件描述语言结合FPGA可编程器件进行数字钟的设计，并通过数码管驱动电路动态显示计时结果。
The paper introduces the design of digital clock based on FPGA and VHDL, the time of clock can be displayed with the digital driving circuit.
针对超声探伤的特点，设计了低噪声、宽频带、动态范围大的接收调理电路。
Aimed at the characteristics of ut, a receive and adjust circuit is designed, which have character of low noise, wideband, wide dynamic range of input.
比较器是前置放大器与动态锁存器组成的开关电容电路。
It is a switch capacitor circuit which consists of the preamplifier and dynamic latch.
仿真结果表明，DSP控制器可以获得较高的功率因数，且具有快速的电路动态响应、灵活的控制方法以及简洁的硬件设计等特点。
The simulation result shows that the DSP controller has very fast dynamic response and unity power factor, flexible control and simplified hardware design.
电容近炸引信的信号处理电路动态性能参数测试是产品研制、调试、生产的重要环节。
The test on dynamic performance of signal process circuit of capacitance proximity fuze is the key of research, adjust, and produce.
基本放大电路的动态分析是模拟电子技术教学中的一个重点，同时也是一难点。
One of the difficult and key items in analog electronics teaching is the dynamic analysis of basic amplifying circuit.
方法：基于C8051F 020和AD 9832的核心控制电路通过动态阻抗匹配法使系统输出最大超声波功率。
Through dynamic impedance matching by kernal control circuit based on C8051F020 and AD9832, the maximum output of ultrasound power is produced.
方法：基于C8051F 020和AD 9832的核心控制电路通过动态阻抗匹配法使系统输出最大超声波功率。
Through dynamic impedance matching by kernal control circuit based on C8051F020 and AD9832, the maximum output of ultrasound power is produced.
应用推荐