对单、双通道振动筛进行了动态特性分析。
Has analyzed the dynamic characteristic of single - pass and double - pass vibrating screen.
本文还对调压保险阀做了动态特性分析和结构优化。
The paper also analyzes the dynamical characteristics of the pressure-adjusting safe valve and optimizes it.
提出了信号采集和动态特性分析的一种简单、可行的方法。
A simple and feasible method is presented to sample signals and analyze their dynamic characteristics.
叙述了对离轴四反光谱成像仪进行动态特性分析的重要性。
The importance of dynamic characteristic analysis of the four-mirror off-axis reflective spectrum imager is explained.
介绍了一种电磁式微进给驱动机构，并进行了动态特性分析。
In this paper, a fine feed mechanism drived by electromagnetic force with a high response frequency and a large travel is introduced.
由于灌装机同步带精确平稳的要求，其动态特性分析尤为重要。
For the precise and smoothly requirements of the Filling Machine, its dynamic characteristic analysis is particularly important.
动态特性分析及参数讨论对该系统的工程设计有一定的指导意义。
Dyamic characteristic analysis and parameters discussion are helpful for engineering design of electric power steering system.
瞬变过程和动态特性分析在开关变换器的研究设计中占有重要地位。
The analysis of transient behavior and dynamic performance plays an important role in the research and design of switch converter.
该模型考虑了换流器开关电路的动态特性，适用于高频动态特性分析。
The model considers the dynamics of converter switch circuit and can be applied in the analysis for high frequency dynamic characteristics.
运用有限元方法对裂纹圆盘进行动态特性分析，获得振型和应变响应。
Dynamic characteristic of a cracked thin disk is analyzed by using finite element method. Its vibration modes and strain responses are obtained.
并介绍了工作原理，对液压冲击、噪声等问题进行理论动态特性分析。
The working principle, hydraulic impact, noise have also been studied in this paper.
应用有限元方法对K 5206nm型压缩机机体进行了动态特性分析。
Using FEM, Dynamic characteristic on the block of model K5206NM compressor is analyzed.
介绍过程设备的动态特性分析，重点介绍特征值、特征向量及响应分析。
Secondly, introduce the dynamic analysis of the process equipments, and emphatically introduce the eigenvalue, eigenvector and response analysis.
利用有限元和实验的方法，对微型机床试验台进行了结构动态特性分析。
The structural dynamic analysis of the test-bed of micro ma chine tool using finite element (FE) and experimental approaches is made.
动态特性分析包括固有振动特性分析，谐响应特性分析和瞬态响应特性分析。
The dynamic analysis include natural vibration analyse, harmonic response analyse and transient response analyse.
可进一步对焊接机壳进行动态特性分析，以便为改进设计提供更可靠的理论依据。
The result showed that the stress and deformation of the being designed welded casing under static state wer…
简述了动态特性分析的基础理论，描述了离轴四反光谱成像仪的实体及有限元模型。
Theory basis of dynamic characteristic analysis is simply described. Solid model and meshed model of the four-mirror off-axis reflective spectrum imager are described either.
编制了辗环机主轴部件动态特性分析的计算机程序，求出各阶固有频率及其主振型。
Compile a computer program to compute the dynamic characteristics of spindle. Each natural frequency and principal mode of vibration is obtained.
此模型为氯乙烯悬浮聚合过程的动态特性分析、过程预测控制和优化提供了基础条件。
The model provides the basis for dynamic behavior analysis, process predictive control and optimization of VCM suspension polymerization.
用有限元方法对单层板结构进行了动态特性分析，并编制了相应的有限元动力计算程序。
The dynamic characteristic of monolayer plate is analyzed by the finite element method, and relevant finite element computation program is compiled.
重新建立了定子机座动态特性分析模型，弥补了传统定子机座动态特性分析模型的不足。
The new model for analyzing the dynamic characteristic of the stator frame has been set up, and the defect of the conventional model dynamic characteristic analysis of stator frame is remanded.
本文对制动器液压油路进行了动态特性分析，并提出液压系统主要参数和结构设计的准则。
This paper carries out the analysis of dynamic characteristics for hydraulic circuit of the brake, and puts forward the criterion of structure design and main parameters in hydraulic system.
利用标准的CAE软件平台，对低地板城市客车车身结构进行数值建模和静动态特性分析。
The numerical modeling and analysis of static and dynamic strength and characteristics of the low floor city bus body structure are carried out in the paper, using a standard CAE software.
本文建立了力平衡式差压（压力）变送器的数学模型，论述了此仪表动态特性分析的一般方法。
The mathematical models of differential pressure transmitter of force-balanced type are presented. The general method of dynamic analysis of the instrument is discussed.
为了满足壳体零件低振动、低噪声的要求，就必须对壳体零件进行动态特性分析和结构动态设计。
In order to satisfy low level in vibration and noise of shield part, the analysis of dynamic performance and structure design should be utilized.
本文以控制力矩陀螺为研究背景，依据有限元方法对控制力矩陀螺进行动态特性分析和可靠性分析。
Based on the background of the CMG, the dissertation is about CMG's dynamic characteristics and reliability analysis using the theory of finite element method.
通过对无阀气功冲击机构的动态特性分析，本文提出了性能参数计算，的线性加速度法，改进了B.M。
Having analysed the dynamic character of valveless pneumatic percussive mechanism, this paper provides a linear acceleration method for calculating characteristic parameters, and corrects B. m.
通过理论分析，建立了GPCM控制液压伺服系统的数学模型，为系统的静态和动态特性分析打下了基础。
Through the theoretical analysis, the mathematics model of GPCM hydraulic control is constructed, and it provides the base for study of GPCM control system.
针对冲压机械的特点，采用计算机仿真和物理模拟，为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
针对冲压机械的特点，采用计算机仿真和物理模拟，为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
应用推荐