在动态温度条件下矿物表面带有正负电荷。
The experimental results show that mineral surface is possessed of negative or positive charge at dynamic temperature condition.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
运用该模型，模拟了一种液氮发动机主换热器的动态温度分布。
According to the model, the temperature distribution of the frost free heat exchange is simulated.
本文提出了一种基于热电偶响应曲线时间常数的动态温度估计方法。
The paper states a dynamic temperature estimating method based on time constant of the response curve of thermocouple.
动态温度估计方法是解决铝电解过程温度在线检测的有效途径之一。
Dynamic temperature estimation is one of the effective method of on-line temperature detection for aluminium electrolysis process.
所得结果可用于转子的动态温度场和应力场计算以及疲劳寿命预测。
The results presented here in can be used to predict transient temperature field, transient stress field, and fatigue lifetime of the steam turbine rotor.
实验结果表明静态温度和动态温度控制精确，波动系数小，系统稳定。
Results show that the system has high precision in both static and dynamic, low volatility in coefficient and excellent stability in performance.
同时也进行了蓄热式换热器的动态温度实验测定，计算结果与实验结果基本吻合。
The transient temperature distribution of the fluids is also measured in a test regenerator, and the results obtained by the numerical method agree with those of the experimental measurement.
介绍一种能对热电偶进行动态校验并能测量动态温度的基于微机数据采集的一体化系统。
An integral system is presented based on a microcomputer data acquisition, which can be used in on line checking of the time constant of thermocouples and measuring of dynamic temperature.
再利用时间常数对测温点的能量平衡方程进行直接求解，从而得到被测介质的真实动态温度。
Then, an energy balance equation of the temperature measurement points is directly solved by the time constants, thus obtaining the real dynamic temperature of a measured media.
通过连续激光调制对薄板试样进行局部周期加热，采用红外扫描测温技术记录动态温度分布。
When a thin plate is heated by a beam of modulated continuous laser, a temperature wave generates and propagates along the plate with amplitude decay and phase delay.
用ANSYS分析了导辊的动态温度场，为导辊冷却系统及其参数的优化设计提供了理论依据。
The guide roll's dynamic temperature field was analyzed by ANSYS, it provided the theory evidence for the guide roll's cooling system and its parameters' optimal design.
用于涡轮机叶片在动态状态下对其振动频率、动应力和温度进行遥测。
It is for telemetering the vibration frequency, dynamic stress and temperature of turbine blades under dynamic state.
此外，还考察系统在一个最优循环周期各个阶段的温度动态以及不同操作条件对最优循环时间和最优制冷功率的影响。
Besides, temperature dynamic profiles and the influences of different operation conditions on optimum cycle time and refrigeration power have been analyzed at all stages of one optimum cycle time.
在相同的速度下，随着温度的升高，动态再结晶现象比较明显。
At the same velocity, the dynamic recrystallization phenomenon is rather distinct with the rise of temperature.
文章对机床主轴组件温度场和热变形动态特性之间的差异进行了分析。
This paper analyzed the difference between the temperature filed and thermal deformation in dynamic characters for spindle components.
本系统主要实现四个功能：图像温度检测功能、动态数据库实时存储功能、参数曲线图生成功能和喷煤量的实时控制功能。
This system mostly realizes four functions: the inspecting temperature based on image, the storage on real time of dynamic data-base, creating parameter's graph and controlling the quantity of coal.
考察了清洗工艺如动态清洗、温度、清洗剂浓度、操作方式等对膜层清洗效果的影响，确定了适宜的清洗工艺参数。
The cleaning technical technology was confirmed by discussing the effects of technical parameters, such as dynamic cleaning, temperature, concentration of cleaning agent and operating modes.
对硅橡胶粘弹性阻尼材料进行不同温度的频率扫描和动态位移扫描实验。
The tests of frequency sweeping and dynamic displacement sweeping at different temperatures for the viscoelastic material silicon rubber were conducted.
提出了利用动态热电偶测得的齿面闪温分布曲线计算齿面积分温度的方法。
The method of calculating integral temperature by measured flash temperature curve was put forward.
通过热激活分析，可以获得定量描述动态断裂韧性、温度及加载速率之间的关系。
A quantitative relationship between dynamic fracture toughness and temperature and loading rate has been obtained through thermal activation analysis.
在环境温度动态变化的条件下，对模型所预测的和实测的人体生理指标变化进行了比较，结果表明，符合较好。
It was shown that the results predicted from the model with modified parameters were well fitted with that measured On the Chinese subjects during dynamic changes of ambient temperature.
目前，用动态力学温度谱可对高分子材料改性的机理作定性分析。
At present the dynamic mechanical temperature spectra are used to analysing the mechanism modification polymer material qualitatively.
研究了用电加热法解决用于动态气流温度测量的小惯性热电偶时间常数的实验测定问题。
This paper studies the method of measuring the time constant of the fast thermocouples which are used to measure a dynamic temperature in air flows.
随变形温度升高，复合材料发生动态回复再结晶。
Dynamic recovery and recrystallization of the composite generate with the increasing of deformation temperature.
“新型化爆材料动态切削温度测试系统”这一课题来源于中国工程物理研究院重大基金项目(项目编号：2001Z 0301)。
The project of the new dynamical cutting temperature measuring system for chemical explosive material is funded by China Academy of Engineering Physical (NO. 2001z0301).
如根据均热炉实时烟气流量和排烟温度动态调节换向时间，可进一步降低均热炉的能耗。
Dynamic regulation of reversal time can further reduce the energy consumption of the regenerative soaking pits according to the flow and the temperature of the gas.
如根据均热炉实时烟气流量和排烟温度动态调节换向时间，可进一步降低均热炉的能耗。
Dynamic regulation of reversal time can further reduce the energy consumption of the regenerative soaking pits according to the flow and the temperature of the gas.
应用推荐