由此可见动态尺寸链的研究是今后的零件制造和装配中一个重要的研究内容。
All of those shows that the research of dynamic dimensional chain will be an important researching contents in the parts manufacture and assembly.
提出了红外动态尺寸检测系统的软件设计流程，给出了红外动态尺寸检测系统的应用方法。
It also proposes a software design procedure and application method for an infrared dynamic dimensional measurement system.
由于涉及的风力和帆面的动态原理，一艘单桅帆船基本上总是相近尺寸的帆船中最快的，尤其是逆风行驶时。
Because of the wind and sail dynamics involved, a sloop is almost always faster than other RIGS in boats of comparable size, especially when sailing to windward.
自动布局是用来动态改变布局的尺寸以适应它们的环境。
Auto layout is designed to create layouts that dynamically adapt to their environment.
采用动态激光光散射研究了接枝单体及水与丙酮的配比对胶束尺寸的影响。
The influence of the monomer, the ratio of water and acetone on the micelle size was investigated by dynamic laser light scattering.
分析了热模拟变形过程中的非均匀应变对奥氏体动态再结晶及晶粒尺寸的影响。
The effect of uneven distribution of strain during compression on dynamic recrystallization and grain size of austenite was analyzed.
形状、尺寸、运动方向、旋转方向和光辐射强度等变化是航天测控视频自跟踪系统目标的重要动态特性。
Shape, dimension, moving direction, rotating direction and light radiation intensity are important dynamic characteristics of the object in space telemetry and telecontrol video auto-tracking system.
用动态激光光散射（DLS），原子力显微镜（AFM）和透射电镜（TEM）等测试方法对配合物胶束的形态及尺寸进行了表征。
The morphologies and sizes of the micelles were characterized by dynamic laser scattering (DLS), atomic force microscopy (AFM) and trans-mission electron microscopy (TEM) and so on.
基于机械加工误差的特点，利用灰色系统理论建立轴承磨削加工过程尺寸误差动态分析的数学模型。
The mathematical model is established for the dynamic distributions of dimension errors in bearing grinding process by means of the Grey theory.
尺寸与动态间隙很接近的磨粒能使泵发生严重磨损。
The particles near to the dynamic clearance dimension generate severe wear.
动态再结晶晶粒尺寸随着变形温度的升高而增大，随着应变速率的升高而减小。
The dynamically recrystallized grain size increases with increasing deformation temperature and reduces with increasing strain rate.
结果表明动态应力强度因子的最大值在加载时间上有滞后性现象，它的最大值随厚壁筒尺寸增加而增加。
The result indicates that the maximum of dynamical stress intensity factor arrives behind the load time and increases with the size of thick wall cylinder.
测试结果表明，岩石的动态断裂韧度同时受到加载率效应和尺寸效应的影响。
The result shows that the dynamic fracture toughness is affected by both the loading rate and the specimen size.
合金在高应变速率的变形中通过动态再结晶可获得更细的晶粒尺寸，其断裂时总延伸率在135%左右。
They also show that a finer grain size can be obtained by dynamic recrystallization during superplastic deformation at a high strain rate, but the total elongation to failure is limited in about 135%.
铁路车轮扁疤动态检测系统根据车轮对钢轨冲击力的大小，在线检测车轮扁疤的位置和尺寸。
The dynamic inspection system for wheel flat on railway wheel inspects and measures the positions and dimensions online on the basis of the value of impact force on rail by the wheels.
作者建议在设计复进簧时，不仅运用传统的静载计算，还要进行动态应力分析，以便获得较合理的尺寸。
It is believed that in the design of the drive spring, it is necessary not only to use the usual static calculations but also to analyse the dynamic stress so as to obtain rational dimensions.
它可以成功地用于动态的详细程度取决于相机的尺寸或距离屏幕。
It can be used successfully for dynamic level of detail depending on distance to camera or size on screen.
并证实了动态再结晶的平均晶粒尺寸与初始晶粒的分布和大小无关的结论。
The simulated results agree well with growth kinetics of dynamic recrystallization and validate the conclusion that the mean size of R-grain is independent of initial grain size and distribution.
动态再结晶晶粒尺寸标准偏差随应变速率的增加而减小。
The standard deviation of dynamic recrystallization grain size decreases with the increase of strain rate.
动态再结晶行为随着应变速率的增大而逐渐被抑制，但晶粒尺寸反而减小；
The dynamic recrystallization behavior is inhibited with the increase of strain rate, but the grain size decreases.
采用两路激光-CCD同时对零件尺寸进行在线动态检测，补偿或消除由于零件振动、跳动等因素带来的测量误差。
On-line dynamic measurement of part sizes is simultaneously carried out by double-path laser CCD. The measuring errors introduced by part vibration and jitter will be compensated or eliminated.
日历控件将呈现在几乎任何尺寸和甚至会动态调整大小，如果它需要。
The calendar control will render at almost any size and will even dynamically resize if it needs to.
文中得到了动态应力集中系数随辅助孔直径的变化规律，同时得到了辅助孔的优化尺寸。
The variation of the DSCF with the diameter of the auxiliary hole has been presented and the optimum size of the auxiliary hole has been obtained.
动态再结晶晶粒尺寸随应变速率的增加而减小，随变形温度的增大而增大。
The size of dynamically recrystallized grain decreased with the increase of strain rate and increased with the increase of deformation temperature.
结果表明，在液压系统中，泵的磨损主要决定于磨粒与泵内关键运动副动态间隙之间的尺寸关系：尺寸小于动态间隙的磨粒影响很小；
The test results show that the wear of the pump in a hydraulic system mainly depends on the relation between the size of abrasive particles and the dynamic clearance dimension of the key moving parts.
除了尺寸与之前创建的地面盒子物体不同之外，我们还必须为动态物体设置质量属性。
The main difference, besides dimensions, is that we must establish the dynamic body's mass properties.
汽车平顺性包括静态和动态两方面，前者与尺寸参数、表面质量、调节性能等相关；
The steer smooth nature involve static and dynamic side, the former is related to dimension parameter , surface quality and adjust capability;
该系统是一个典型的光、机、电、算集成的MEMS测试系统，已应用于MEMS微结构几何尺寸和动态特性等的测量。
This is a typical optical, mechanical, electronic and calculated integral system and can be applied to the geometry and dynamic measurement of MEMS microstructure.
通过回归分析，建立了动态再结晶晶粒尺寸与温度、应变速率之间的定量关系。
The quantitative relationship between the recrystallized grain size and the temperature as to as the strain rate is established by the regression analysis.
通过回归分析，建立了动态再结晶晶粒尺寸与温度、应变速率之间的定量关系。
The quantitative relationship between the recrystallized grain size and the temperature as to as the strain rate is established by the regression analysis.
应用推荐