直升机旋翼锥体及动平衡测量系统是直升机专用测试设备。
The measurement system of the rotor track and the dynamic balance for the helicopter is a kind of special electronic testing equipment.
介绍一种采用两步法进行位标器陀螺转子动平衡测量的数字方法。
This paper has discussed a digital method for measuring dynamical balance of the coordinator gyrorotor.
介绍了一种智能化动平衡测量仪，它具有友好的汉字人-机界面；
An intelligent dynamic balance measurer is introduced. This measurer has a user friendly interface.
介绍了一种采用两步法进行位标器陀螺转子动平衡测量的数字方法。
A digital method for measuring dynamical balance of the coordinator gyrorotor is discussed.
介绍了一种集动平衡测量与校正铣削加工于一体的轮对数控校正系统。
This paper introduces a wheel pair NC correcting system, which has the functions of both dynamic balance measure and milling process.
根据瞬时运动中心的概念，提出一种全新的动平衡测量虚拟振动系统。
Based on the conception of instantaneous motion center, a new virtual vibration system for dynamic balancing measurement is proposed.
本文介绍了80 98单片机用于动平衡测量的硬件构成和软件设计方法。
This paper presents its measurement principle, hardware, disposition and software technology used in the 8098 microcomputer based dynamic equilibration measurement system.
本文介绍了可编程序控制器（PLC）在曲轴动平衡测量校正系统中的应用。
This paper introduces the application of programmable Controller (PLC) in the measuring and correction system of crankshaft dynamic balancing.
利用压电式力传感器作为动平衡测量系统中的敏感元件来测量不平衡质量引起的振动。
The piezoelectric pressure transducer is applied to dynamic balancing measurement system for measuring the vibration caused by imbalanced mass.
描述了该系统的组成结构和实现方法，通过对实验转子动平衡测量的研究证明了系统的性能。
The structure and construction of the system was described, the property of the system was proven with a study on the balancing exper…
传感器是动平衡测量系统中的重要元件之一，是一种将不平衡量产生的振动信号不失真地转变成电信号的装置。
As one of important elements in the dynamic balancing measurement system, transducer is the device that converts the vibration signal caused by the imbalance into electrical signal without distortion.
软件部分主要包括系统的初始化、自检、量程选择、平衡参数设置、定标系数确定、动平衡测量、键盘中断处理、彩色液晶显示等模块。
Software consists of system initialization, self-test, measurement range selection, balance parameter setting, calibration coefficients determining, access programs of keyboard and LCD.
本文研究了利用自动平衡电桥方法，通过测量高端和低端两路矢量电压来精确测量电感L、电容C和电阻R（即LCR）。
This paper studies the method of auto balancing bridge to precisely measure inductance L, capacitance C, resistance R(namely LCR)by measuring the high and low terminal vector voltages.
另外，动平衡机能够提供更高的灵敏性来测量静态或单一平面的不平衡。
In addition, a dynamic balancer can provide greater sensitivity to measure static or single plane unbalance.
对精密旋转设备的静、动平衡原理进行了深入分析，提出了相应的测量方法；
The principle of static and dynamic balance of precision rotating equipment is analyzed. The corresponding measurement method is brought forward.
介绍了在工业用硬支承动平衡机中利用计算机代替传统的电气箱作为测量和解算装置的方法。
This paper presents an approach of vibration measurement and analysis by incorporating a microcomputer system in industrial rigid support dynamic balance machine.
影响系数法是利用线性系统中校正量和被测量之间的线性关系进行转子动平衡。
The linear relationship between the corrected value and measured value is used to balance the rotor in the influence coefficient method.
它可测量机床的动平衡，也可测量机床主轴的回转精度、工件圆度等。
It can be used for measuring dynamic balance and spindle rotating accuracy of machine tools, and cylindricity of workpieces.
将机械动力学与有限元分析方法相结合，建立了机构动平衡实验台振动测量的仿真方法。
Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing test-bed of mechanism.
详细介绍了自动平衡电桥、测试信号的产生、高速A -D转换等测量系统中的关键技术。
This paper also particularly introduces the key technology of the auto balancing bridges, the generating of the test signal and the high speed A-D converter in the measurement system.
基于视窗的UNI - 44测量系统，功能强大，使得我们能够制造出节约成本的半自动平衡机，无需PLC及其他复杂的控制。
The powerful UNI-44 Windows-based measuring system enables us to produce a cost effective semi-automatic balancer without the need for a PLC and other complex controls.
MT825型车轮动平衡机能自动测量车轮的不平衡度，并且自动将车轮停在要平衡的位置。
MT825 automatic measurement function type wheel balancing wheel imbalance, and automatically stop the wheels to balance position.
MT850型车轮动平衡机能自动测量车轮的不平衡度，并且自动将车轮停在要平衡的位置。
MT850 automatic measurement function type wheel balancing wheel imbalance, and automatically stop the wheels to balance position.
它集振动、轴承状况的测量及诊断和对旋转机器进行多面动平衡调整于一身。
It can be used in almost every industrial maintenance for quick monitoring and FFT signal diagnosis of machine condition.
它集振动、轴承状况的测量及诊断和对旋转机器进行多面动平衡调整于一身。
It can be used in almost every industrial maintenance for quick monitoring and FFT signal diagnosis of machine condition.
应用推荐