利用动力学分析软件ADAMS，建立动力总成悬置系统的六自由度动力学模型。
In this paper, a six-degree-of-freedom model of power train mount system is set up by using the software ADAMS.
基于多体动力学分析软件ADAMS，建立了空间望远镜可展开主镜的虚拟样机模型。
The virtual prototype of the deployable master mirror system of the space telescope is established by using ADAMS(Automatic dynamic analysis mechanical systems).
采用机械系统动力学分析软件ADAMS，对如何提高旋转秋千的安全性能进行了分析研究。
Mechanical system dynamics software ADAMS was used to do some study for improving the security of rotary swing.
本文基于多体系统动力学理论，利用机械系统动力学分析软件建立了某单兵自卫武器的虚拟样机模型。
Based on the theory of "Multi-body System Dynamics" , this paper uses software to setup a virtual prototype for a "Personal Defense Weapon" (PDW).
最后运用运动学及动力学分析软件ADAMS对平面变胞机构进行了比较深入的运动学及动力学分析。
Furthermore, the thorough kinematic and dynamic analysis of the mechanisms is carried on by software ADAMS.
针对某款客车带有转向中间臂的转向杆系出现的问题，利用系统动力学分析软件ADAMS进行分析，找出问题并进行设计改进。
The paper aims at the problems of steering linkage with transition pitman arm of a bus, uses system dynamics software ADAMS to check and find out the problems, and then improves the design.
利用动力学分析软件ADAMS建立采矿船及集矿车船上吊运过程的虚拟样机模型，对集矿车的船上吊运过程进行模拟与动力学仿真。
Virtual prototype of ship and process of transporting the collector were constructed in ADAMS and the process of transporting it were simulated.
利用SIMPACK车辆动力学分析软件分析了12轴大型货车的曲线通过性能，得出了车辆曲线通过速度和曲线外轨超高的较佳匹配结果。
The curve negotiation performance of the 12-axle large wagons is analyzed with the SIMPACK vehicle dynamics analysis software.
本文应用汽车动力学分析软件ADAMS建立了汽车前悬架—转向系统的仿真模型，并采用单轮激振方式对模型的动力学特性进行了仿真分析。
The ADAMS software is used to build the front suspension and steering system model, and simulation analysis on the model is done by means of wheel flouncing.
使用ADAMS动力学分析软件对手爪系统进行了详尽的分析，求出了满足系统设计要求的最小驱动力矩，为控制系统的设计提供了理论依据。
Used Kinetic analysis software ADAMS analysis the system detailed, obtained the system driving torque, provided the theoretical basis for the design of the control system.
之后则应用虚拟样机技术，运用ADAMS动力学分析软件对设计出的模型进行了动态分析，在分析对比了两种不同的设计方案之后，采用了其中一种较好的设计方案；
Then with the visual prototype technology, the dynamic analysis with ADAMS is done for the model and two different projects are contrasted . With the analysis, the better project design is got.
针对空间碎片超高速撞击充气压力容器问题，应用非线性动力学分析软件AUTODYN-2D，采用SPH方法对碎片云在高压气体中的运动特性进行了数值模拟研究。
SPH methods in AUTODYN-2D was used to investigate the characteristics of debris clouds propagation inside the gas-filled pressure vessels for hypervelocity impact on the pressure vessels.
详细叙述了ADAMS软件的多体动力学分析原理，对希望从底层开发自主知识产权虚拟样机仿真软件的人员有一定的参考价值。
Multi-body-dynamics theory about ADAMS software is discussed in detail, which may be helpful to somebody interesting in developing our VP software owned knowledge patent.
该文通过对车辆的动力学分析，建立了事故再现中的汽车轨迹模型，并实现了计算机软件，最后对模型进行了验证。
Through the dynamic analysis of vehicle, the Vehicle Trajectory Model is built, and the programming of the model is established and validated in the paper.
利用ANSYS有限元软件对采煤机截割部进行了瞬态动力学分析，从时间响应的角度研究振动位移规律。
Transient dynamic analysis for the cutting part of shearer by finite element software ANSYS has been made, the law of vibration displacement is studied from the perspective of time response.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
在进行挖沟器的系统动力学分析过程中，利用了虚拟样机技术adams软件对挖沟器链传动过程中的受力情况进行了动态仿真。
During the dynamic analysis of mechanical system, the force that act on the chain of trenching implement is simulated by virtual prototype soft ADAMS.
王福军。计算流体动力学分析—CFD软件原理与应用[M]。北京：清华大学出版社，2005。
WANG Fujun. Computational Fluid Dynamics Analysis-Theory and Application of CFD Software [m]. Beijing: Tsinghua University Press, 2005.
ADAMS是目前著名的虚拟样机分析软件，运用ADAMS软件，用户可以很方便地对虚拟样机进行静力学、运动学和动力学分析。
ADAMS is one of the famous virtual prototype analytic software. The application of ADAMS can help us to conveniently analyze virtual prototype in statics kinematics and dynamics.
基于所建立的模型和ANSYS软件平台对以上的结果进行分析，分别对气门进行静力学分析、模态分析和气门一个运转周期内的瞬态动力学分析。
We have executed static analysis, model analysis and dynamic analysis on the exhaust valve in one cycle of the engine, basing on the model we founded and the finite element analysis software of ANSYS.
最后对整个软件设计流程、数值仿真模块的程序设计以及与动力学分析主模块的接口作了说明，并对仿真的关键部分与重点给出了解决方法。
Finally, the flow chart of the system, design of numerical simulation module, and program interface are explained and the resolutions of key parts of simulation design are given.
本文建立了基于ANSYS有限元分析软件的光学振动失调物理模型，通过瞬态动力学分析得到了反射镜在振动激励下的位移响应。
Physical model of misaligned optical system under interference vibration was developed based on ANSYS and the dynamic response of the reflector was obtained by transient dynamic analysis.
本文建立了基于ANSYS有限元分析软件的光学振动失调物理模型，通过瞬态动力学分析得到了反射镜在振动激励下的位移响应。
Physical model of misaligned optical system under interference vibration was developed based on ANSYS and the dynamic response of the reflector was obtained by transient dynamic analysis.
应用推荐