禁止以炉衬作为加热工件的导轨。
Prohibit taking furnace lining as the guide for heating workpiece.
感应器内水冷导轨,实际上是加热工件的运动轨道,它一直处于高温下工作。
The water-cooled guide in the inductor is actually the motion track for heating workpiece, it is working under high temperature all the time.
如通水不足或水压不够,就会产生气化,烧红,变形,加热工件就无法从感应器内通过。
In case that the water inflow is not enough or the water pressure is not enough, it may lead to gasifying, burning red and out of shape, and the heating workpiece may not go through the inductor.
它具有火焰不直接冲刷加热工件、升温速度快、加热温度均匀、节约燃料、结构新颖等特点。
It possesses the characteristics of fast speed heating up, homogeneous heating, fuel conservation and novel structure.
透热炉感应器,又称贯通式感应器,根据加热工件的长短和工件的直径大小,感应器有长有短。
Diathermanous furnace inductor, is also know as through-type inductor, it is long or short according to the length of heating workpiece and the diameter of the workpiece.
感应加热系统的基本组成包括感应线圈、交流电源和工件。
Induction heating system elements, including induction coil, an AC power source and the workpiece.
拥有双闭环控制功能,最大程度高效快速加热,优化金属工件的加热过程。
Having double close-loop control function may heat rapidly with high efficiency furthest and optimize the heating process of metal workpiece.
焊接过程对被焊工件来说,是局部的不均匀加热过程和不均匀冷却过程。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
感应加热电源是利用电涡流对工件加热的一种装置,由于具有诸多优点而在工业中得到了广泛的应用。
Power supply for induction heating is an equipment to heat the workpiece by whirling current and it is applied widely in industry because of its many virtues.
喷头被加热来熔化材料丝,加热的温度需可靠和精确,否则影响出丝的速度,导致工件表明不光滑。
Spray head is heated to fused filament. The temperature should be reliable and precise, or it would aspect speed of spraying.
在热处理的过程中,工件相互间无碰撞,均衡的通过炉膛加热,加上可控气氛的作用下,阻止空气进入炉内。
In the heat treatment process, no collision between the workpiece and balanced by furnace heating, plus under the influence of controlled atmosphere to prevent air entering the furnace.
从理论上研究了辉光放电时的离化率、正离子浓度、工件的加热问题。
This paper deals with the problems of ionization proportion, ion density and heating work piece on glow discharge.
金属热处理是将金属工件放在一定的介质中加热到适宜的温度,并在此温度中保持一定时间后,又以不同速度冷却的一种工艺。
Metal heat treatment is a kind of craft to heat pieces of metals at the suitable temperature in some medium and to cool them at different speed after some time.
表面淬火如图感应线圈流过很大的中频电流而将工件表面加热。
Figure induction coil surface hardening of medium frequency current flowing through the great but will heat the surface of the workpiece.
即使加热到正确的温度后,工件也应在此温度下保持足够时间以让其最厚截面达到相同温度。
Even after the correct temperature has been reached, the piece should be held at that temperature for a sufficient period of time to permit its thickest section to attain a uniform temperature.
液体氮化由于液体与工件直接传导加热,缩短了工件加热时间,提高了渗氮速度。
Because the liquid nitriding the liquid and the work piece direct conduction heating, reduced the work piece heating-up time, raised the azotize speed.
主要供井式炉、台车炉、箱式炉、盐浴炉等各种电炉加热后的工件淬火使用。
ZC Series quenching tank, mainly for electric Well, the electric car, box-type furnace, molten salt, and other electric furnace heated hardening of the workpiece use.
指出感应圈的形状及其与工件之间的相互位置对加热的质量和效率起至关重要的作用。
The shape of inductor and the distance between workpiece and inductor are important to quality and efficiency.
感应加热逆变电源已经逐渐地应用于工业透热,其主要加热对象为炮筒类工件。
Induction heating inverters have been gradually applied to industrial diathermy, whose main heating objects are the barrel type workpieces.
将工件放在盒内,再把盒放入真空炉中加热进行钎焊,可显著提高钎焊质量。
When brazing was carried out by placing the workpiece in a box inside a vacuum furnace, the brazing quality may be improved distinctly.
对厚金属板区的固化加热时间要比薄金属板区长,对厚金属板区工件要进行固化评定。因为厚板区宽固化加热时间要比薄金属区长。
Heavy metal areas should be used for cure evaluation since they require more heat time for curing than do thin metal panels.
由于邻近效应和集肤效应的影响,感应加热时只是工件中靠近外表皮透入深度为定值的一层直接发热,内部发热很少;
Due to its proximity effect and skin effect, induction heating is only the workpiece near the outer skin penetration depth of a layer of fixed value of the direct heating, internal heating is small;
以及对加热炉回火炉出料口的工件增设红外线在线检测,以在线检测工件温度为采样点的温度控制系统,来保证工件热处理温度的均匀性。
Raise the self-controlling ability of the transmission and heat-treatment system, and expanse the infra-red ray detection on the export of the tempering furnace.
感应加热表面淬火的工件材料一般为中碳钢。
Induction surface hardening of the workpiece material is usually carbon steel.
感应加热表面淬火的工件材料一般为中碳钢。
Induction surface hardening of the workpiece material is usually carbon steel.
应用推荐