几乎每间地下室都会显示出一定的过去的加工面。
Nearly every basement has something that will project past finished surfaces.
本设计先加工孔后加工面。
刀具直径大，切割速度高，加工面质量好。
Large diameter of milling knives, high speed milling, good quality milling profile surface.
这是机加工面与被称为后侧面的刀具底面夹角。
Clearance Angle. This is the Angle between the machined surface and the underside of the tool called the flank face.
切削深度d是未加工面与已加工面之间的垂直距离。
Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.
所有加工面，包括磨整过的表面，都必须进行磁粉探伤。
All (100%) machined areas, as well as grinded surfaces must be inspected by magnetic particle.
用于球墨铸铁、高强度铸铁件加工面和非加工面的补焊。
For repair welding of grey cast iron which requires less strength.
纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫。
Pure nickel, excellent general properties. Used to weld thin cast iron part repair welding machined surface, such as guided way of machine tool.
对工件所有精加工面进行测量，取最大值作为直线度的测量值。
Perform this measurement for all finished faces, and take the maximum as the measured value of the straightness.
能快速地对模具进行整形或抛光，并能快速地使加工面达到镜面。
It can be able to shape or polish quickly on die, and quickly make the processing side to reach mirror.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel, good machinability bad crack resistance. Repair welding of shole gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
对于直接夹持己精加工的表面时，必须采取加软垫等保护措施，以免夹伤己加工面。
For the surface finishing has direct clamping, must adopt padded protection measures, so as to avoid injury has been machined surface.
被滚压的加工面其密封性及耐久性被大幅度地提高，其卓越的性能得到充分地发挥。
Processing by rolling the seal surface and durability are greatly improved, and its excellent performance into full play.
垂直于铣削加工面各点的显微硬度，随着距切削表面距离的增大而逐渐降低，且趋于平缓；
The microhardness of various point of milling working surface gradually reduces with the increase of distance of cutting surface, and then remains flat.
提出了牺牲层工艺保护非加工面，并建立实验系统，对堆焊修复后的TC4叶片进行电解修型。
Sacrificial layer process was proposed to protect the non-machined surface in this work and an experimental system was developed to shape overlay welded TC4 blades.
固着磨料平面研磨加工中磨具的均匀磨损对于保证磨具和工件的加工面形精度具有极为重要的意义。
In the process of plane lapping with solid abrasive, the uniform abrasion of lapping tool is very important to ensure a good form of the workpiece and the lap-ping tool.
对于C6150主轴箱箱体的工艺设计而言，由于箱体结构呈腔形，中间有隔板，加工面多，精度求较高。
C6150 spindle box box for the process design of the body is concerned, because cavity shape, structure of middle clapboard, processing surface much, higher accuracy.
齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
加工后的食品有面包，预制类食品有面块、肉类和蛋、比萨饼、冷盘食品和熏猪肉、奶酪、汤类及其它快餐。
Processed foods include bread, prepared dinners like pasta, meat and egg dishes, pizza, cold cuts and bacon, cheese, soups, and fast foods.
现在的外科医生通常从病人的髋关节或胫骨处借用骨块，然后用人工方法把它们巧妙加工成与缺失面骨相似的形状。
Surgeons nowadays borrow bits of bone, typically from the patient's hip or shin, and manually craft them into something akin to the missing facial fragments.
积极的一面是，你可以增加工作阅历，积累经验，提升技能；
The upside is the increased work exposure helps you gain experience and develop your skills.
指出此加工方案能控制常规锥度切割，同时也能加工复杂的变锥度异面工件。
The scheme can control the conventional cutting as well as antarafacial machining of the complex work.
采用成形铣削加工叶轮型面，保证了加工精度，提高了生产效率。
The application of process of vane wheel profile forming can ensure the machining accuracy and improve the productive efficiency.
住宅的外立面采用了未加工的西伯利亚落叶松饰面，随着时间的推移木材将会逐渐变为银灰色。
The exterior of the house has been clad in untreated Siberian Larch, which is expected to gradually change its colour to silver grey over time.
工件的主要表面，装配基面应先加工，从而及早发现毛坯中主要表面可能存的缺陷。
The main surface of the workpiece, the assembly surface should be first processing, thus early detection of defects in the workpiece surface may be the main.
工件的主要表面，装配基面应先加工，从而及早发现毛坯中主要表面可能存的缺陷。
The main surface of the workpiece, the assembly surface should be first processing, thus early detection of defects in the workpiece surface may be the main.
应用推荐