证明了迭加原理公式的一般形式和递推形式。
The general and the recurrent formulae of the superposition principle are proved.
线性非时变正弦稳态电路的功率不能用迭加原理吗？
Can't Apply the Superposition Theorem for the Power of the Linear Time-Invariant Sinusoidal Steady State Circuit?
迭加原理在物理学及其他许多领域中有广泛的应用。
The Principle of Superposition has found its wide application in physics and many other fields.
本文从流体扩散能量迭加原理出发，建立了裂隙岩体介质的渗流张量解析表达式。
Based on the principle of fluid diffusion energy superposition, an analytical expression formula of seepage tensor in the fractured rock mass medium is established.
根据静电场迭加原理将体表电位看成边界效应和心电荷在无限媒质中产生的电位和。
Based reiterative principle of electrostatic field the body surface potential can be seen as sum of function of boundary and function of cardiac charges in infinite medium.
本文用迭加原理和广义简支边的概念，解决了四边被多个点支承的矩形板的弯曲问题。
In this paper, The principle of superposition and the concept of generalized simply supported edge are used to solve the bending of rectangular plates with multiple point supports along four edges.
本文依据阿苏尔杆组理论及运动迭加原理，提出了一种新的高级机构运动分析方法——变换原动件法。
This paper presents a new method with driver transformation for the kinematic analysis of the planar mechanisms in high class, based on the Assur group theory and kinematic superposition principle.
由迭加原理，可分离出任一单个裂纹面在无限大板中的虚拟应力，从而求出有限或无限域中各条裂纹的应力强度因子值。
By the principle of superposition fictitious stress on any individual crack surface in infinity can be resolved and also its value of stress intensity factor in infinity or finite body is obtained.
文中还用光测数据迭加原理确定了弹性应力阶段洞室围岩在各种荷载作用下的最终成果，避免了模型由于同时加载困难所带来的单独施加荷载所造成的繁琐量测和计算。
Using the principle of photoelastic data superposition, the author defined the net effects of stress in wall rocks of the cave under all kinds of load. This avoided the trouble…
这种加工工艺叫作加层制造法，其工作原理有些类似三维打印机。
The process is called Additive Layer Manufacturing, and it works somewhat like a 3-D printer.
欧加南墨机器的原理和一些企业界用来制造零件及机械运转模型的快速原型机类似。
Organovo's 3d bio-printer works in a similar way to some rapid-prototyping machines used in industry to make parts and mechanically functioning models.
欧加南墨机器的原理和一些企业界用来制造零件及机械运转模型的快速原型机类似。
Organovo’s 3D bio-printer works in a similar way to some rapid-prototyping machines used in industry to make parts and mechanically functioning models.
根据激光扫描平移加旋转法的测量原理，推导出了非球面光学零件面形测量的数学模型；
The mathematical model of the surface shape measurement of aspherical optical components is built up according to the laser scanning measurement principle by the translation & rotation method.
介绍了PF C的基本原理，推导了一阶加纯滞后系统PF C算法。
The basic principles of PFC are introduced, and PFC algorithm for first-order plus dead-time system is delivered.
介绍了回采巷道复合顶板条件下采用小直径管缝式锚杆加钢筋梯式组合网支护的原理、方法和取得的经济效果。
The paper introduced the principle and methods of supporting combined the slit wedge bolt in small diameter with steel reinforcement in roadway with compound roof, and obtained economic effects.
文中阐明了这种复变应力函数迭加解法的基本原理，并用此方法计算了双孔、三孔和四孔边裂纹板的若干数值例子。
The basic principles of the method are described, and some numerical examples of the radial cracks appearing at the boundary of twin, three and four circular holes are calculated.
本文介绍了基于信号局部统计性质的、能同时压制加性高斯噪声和脉冲噪声的自适应顺序统计滤波器的基本原理。
The paper introduced the basic principles of adaptive L-order statistic filter based on local statistic properties of signals and the features of suppression of Gaussian noise and pulse disturbance.
文中论述了该段防洪模型的设计原理、加糙方法、自动检测与控制系统的组成和功能。
The design principle, artificial roughness, component and function of automatic measuring and control system of the flood control model are introduced here.
文中首先指出了工业厂房加湿的必要性，然后引入干蒸汽加湿系统，对系统的布置和工作原理作了较为详细的介绍。
In this article, the writer first points out the necessity of humidity enhancing, then the saturated steam humidity enhancing system is introduced, including its arrangement and working principle.
对于加筋板中筋的侧倾失稳，则通过能量法推导加强筋侧倾失稳时的总势能泛函，利用最小势能原理求解出此失稳模式下的临界应力。
In the analysis of the elastic tripping of the stiffener, the critical stress under this mode of failure is derived by using the energy method and the principle of least potential energy.
利用传热学原理估算了带钢连续退火生产中采用氢气和氢气加雾化水冷却介质的冷却速度。
The strip cooling rate with hydrogen and hydrogen plus water spray on continuous annealing line is estimated according to the heat transfer principle.
分别介绍可寻址用户管理系统和跳频加解扰系统的基本原理和功能特点，以及两种用户管理系统的综合应用。
This paper introduces the basic principles and functions of two kinds of user's management systems and comprehensive application.
推荐采用最简单、可靠的金属氧化物耗能限流和无源型迭加振荡电流的原理方式。
It is recommended to apply simplist and most reliable principle mode, which use metal oxide to consume energy, to limit current and add oscillating current using.
介绍了PLC自动加药系统的给药控制原理及其应用。
This paper presents the feeding control principle of the PLC Automatic Reagent feeding System as well as its applications.
介绍了纸张填加剂含量检测的基本原理。
This article introduces basic principle of measuring additives content of paper.
从预测模型、反馈校正和优化控制三方面对预测函数控制基本原理进行了系统的阐述并针对一阶加纯滞后对象推导了单变量预测函数控制的基本算法。
The principle of PFC is introduced from three aspects: predictive model, error compensation and optimal algorithm. The basic PFC algorithm for first-order plus time delay system is developed.
对机加石墨型的特性及红外加热原理进行了分析，经试验确定了红外预热铸型工艺。
The character of machining graphic mould and the principle of infrared heating have been analyzed.
叙述了该系统的组成及原理，并着重分析和讨论了编码方式、滤波、均衡、加扰及解扰等问题。
This paper describes the architecture and principle of DITS system. The problems about coding, filtering, equalization, scramble and descramble are discussed in detail.
介绍了压缩天然气汽车加气站工作原理及类型，分析了加气站的火灾危险性，提出了防止火灾、爆炸事故发生的安全措施。
This paper introduces theory and types of CNG filling gas station. Then, it analyzes the its fire hazards and offers prevention measures for fire and explosion accidents.
主要介绍调频加网技术的特点和网点产生的原理。
This paper mainly introduces characteristics of the FM screening and the principle of dot appearance.
应用推荐