这种特有的色散关系的研究对研制一种新型的微波致密大功率输出器件具有一定的理论指导意义。
The distinctive interaction mechanism is promising for the design of a new kind of compact high-power microwave generation devices.
这两种属性决定着热电材料的“品质因数”。“品质因数”是用来描述用热电材料所制成的元器件的输出功率的单位。
These two properties define what physicists call the "figure of merit" of a thermoelectric substance, which describes the power a device made of that substance could generate.
分析了腔镜反射率、量子阱数等参数对阈值电流、输出光功率的影响，并根据理论计算对器件参数进行了优化设计。
The effects of DBR reflectivity and well Numbers on threshold current and output power of bottom-emitting VCSELs were analyzed to design an optimal device structure.
另外，还讨论了窗口沾污对器件输出功率等因素的影响。
In addition, the influence of window pollution on the output power is discussed.
由于化学储能的巨大，这类器件目前输出的连续波功率已达兆瓦级，大大高于所有其他激光器。
Based on the enormous chemical energy deposit, several kinds of chemical laser now deliver the cw power outputs of megawatt magnitude, far higher than any other lasers.
提出了利用PNP型功率晶体管来扩展集成电源器件输出电流的方法。
Introduces a good way that capitalizes power transistors of PNP pattern to amplify output current.
管状固体激光器可获得较高的斜效率及电光转换效率，因此是人们寻求可获得高输出功率的有效器件之一。
Solid-state tube laser (SSTL) is one of available laser with high power output, for its high slop efficiency and electro-optical efficiency compared to the solid-state rod laser.
随着对器件输出功率的要求越来越高，器件的散热性能成了一个倍受关注的问题。
With the higher request on output power of the millimeter-wave devices, the problems of the ohmic wall loading have been paid much attention.
射频功率LDMOS的寄生电容直接影响器件的输出特性。
The output characteristics of the RF power LDMOS are greatly affected by the parasitic capacitance.
在介质切伦可夫脉塞中加入背景等离子体可有效地提高器件的效率和微波输出 功率。
The use of a background plasma in a dielectric Cherenkov maser can effectively increase the efficiency and the microwave power output of the device.
近年来研究发现，当在微波器件中填充了等离子体后，器件的输出功率和互作用效率得到显著提高，同时等离子体还可改善电子注的传输质量。
It is researched and discovered that filling plasma into microwave instrument may increase it's output power and interaction efficiency and improve transmission quantity of electronic beam.
倍频式感应加热电源负载输出频率为功率开关管工作频率的二倍，且功率开关器件工作时具有软开关特性，在需要高频应用的场合很有意义。
Since its output frequency is as twice as the device frequency and it has the merit of soft-switching characteristic, multiple-frequency induction heater is widely used in high frequency application.
近年来实验研究发现，等离子体加载高功率微波器件后，器件的输出功率和互作用效率得到显著的提高。
In recent years, experiments show that in the plasma loaded high power microwave device may obtain much higher interaction efficiency and output power than the ones absence of plasma.
传统同位素微电池的能量转换结构采用单层阵列形式，造成电池输出功率较小，不能满足微型传感器件的需求。
Traditional Radioisotope micro Battery (RMB) with direct conversion device of single layer array does not meet the requirements of micro sensor devices for its lower output power.
之后在器件的实际工作条件下，确立了以单位面积输出最大功率为原则对器件的几何尺寸进行了优化；
The maximum output power at the unit area was established as the principle to optimize the physical dimension of the device.
最近的一系列的实验研究表明，在大功率微波器件中填充等离子体可以大大增强其电子束与波的互作用效率，提高功率输出的水平；
Recently, much attention has been made on the study of plasma-filled high-power microwave devices for the enhancement of efficiency and output power.
真空微电子器件相对于半导体器件来说，有着更高的工作频率和输出功率，正常工作温度范围也相对较大。
Compared with semiconductor devices, vacuum microelectronic devices can work with higher frequency and larger power at a wider range of temperature.
采用哪种类型的器件取决于要实现的功能和器件输入和输出侧功率电路的特性。
Which type or types of devices are to be used depends on the functions desired and the characteristics of the power circuits on the input and output sided of the devices.
测试结果表明这种新结构器件不仅表现了良好的工作特性，而且输出功率也提高到环形沟槽结构的1.34倍。
The testing results show that these VCSELs operate with good performance, light output power is 1.34 times as much as that with ring groove.
分析了变频器主功率器件IGBT的死区时间对其输出电压、输出电流的影响。
The influence of dead time of power device IGBT on inverter's output current and output voltage is discussed.
以新一代功率因数校正芯片CM 6800为核心，提出了一种宽电压输入、固定电压输出的LCD电视机电源的设计方案，重点讲述了CM 6800的主要特性及各主要器件参数选择。
The LCD power supply with universal input and fixed output voltage is analyzed and then designed based on CM6800. The main property of CM6800 and the main components parameter's choice are discussed.
在单个器件输出功率有限的情况下，往往需要采用功率合成技术来实现更大功率输出。
As a single solid-state device's output power is low, power combining technology is usually used to achieve higher power output.
进一步研究表明，通过改变器件内部介质柱的半径，可以改变光在输出端的输出功率。
Further studies indicate that the output optical power in each output port of the device can be tuned by reducing the radii of the silicon rods in the photonic crystals.
对于大多数功率脉冲发生器，其输出电压级别、占空比、使用寿命都是由开关器件的能力所决定的。
For most pulsed power generators, the output power level, the repetition rate, and the lifetime are determined by the capability of the switches.
经过这样处理后的器件，漏极射频电流损失小，器件击穿电压和输出功率得以提高。
The device treated by the process is of small loss of drain radio-frequency current and increased electric breakdown strength of device as well as delivered power.
PD P扫描驱动芯片完成高低压转换和功率输出，要求器件耐压170v。
PDP scan driver accomplishes the chang of voltage from low to high, needing the high voltage transistor of170V.
PD P扫描驱动芯片完成高低压转换和功率输出，要求器件耐压170v。
PDP scan driver accomplishes the chang of voltage from low to high, needing the high voltage transistor of170V.
应用推荐