诺格公司也将综合现有的宽角光学、数字图像和低功率数字信号处理(dsp)，House说。
Northrop Grumman will also integrate current wide Angle optics, digital imaging, and low-power digital signal processing (DSP), House says.
介绍了一种实用型高功率、高光束质量CO2激光焊接、切割机，分析其光学系统。
A practical high-power CO2 laser welding and cutting equipment with high beam quality was introduced, the optical system was analyzed.
进口光学激光镜片组，激光功率光损耗低，光束质量好。
Imported optical mirror, reduce wastage of laser power, high quality of light beam.
由于结合剂和磨粒之间存在热物理、光学性质差异，可通过选择合理的脉冲激光功率密度去除结合剂，凸出磨粒，实现选择性去除。
Due to the thermal-physical and optical differences between bonds and abrasives, suitable pulse power density is selected to remove bonds and protrude abrasives realizing the selective removal.
波前功率谱密度（PSD）被用于评价惯性约束聚变（ICF）激光驱动器光学元件中频段的波前误差。
The wavefront power spectral density(PSD) is being adopted for specifying the large optical component employed in high power density solid-state laser for inertial confinement fusion(ICF).
本论文就是对光学实验中激光功率测量技术的研制。
This paper is about the measurement techniques of laser power for optical experiments.
导出了共焦显微镜中不同荧光波长情况下的荧光功率传输函数、三维脉冲响应函数(3d P SF)和三维光学传递函数(3dOTF)。
Fluorescence power transfer function, three dimensional point spread function (3d PSF) and three dimensional optical transfer function (3d OTF) for the various fluorescent wavelength are calculated.
随着激光器的能量密度和功率进一步提高，用以传输激光的大型光学元件中的横向受激布里渊散射现象越来越受到人们关注。
Transverse stimulated Brillouin scattering (TSBS) in large optics has been paid more and more attention in recent years with the gradual improvement of laser's energy density and power.
波前功率谱密度（PSD）被用于评价ICF激光驱动器光学元件在中频区域的波前误差。
The wavefront power spectral density (PSD) is being adopted for specifying the large optical components employed in high power density solid state laser for inertial confinement fusion (ICF).
本文论述一个由流体力学和光学联系起来的新课题——激光通过湍流剪切层后的相位变化及峰值功率变化。
In this paper, the investigation of the variations of the peak power and phase Angle of a laser beam passing through a turbulent shear layer is discussed.
我们提出采用光学双稳装置来稳定光源输出功率，并将它用于折射率调制型光纤传感器测量液体浓度的实验中。
We suggested to stable the output light intensity by using the bistable optical device and use this new device to measure the density of liquid by refractive index modulation sensor.
在本文中，作者负责激光功率计的镜头光学设计、结构设计，电子箱电路软硬件设计工作。
Project, the author is responsible for optical design of the lens, structure, electronic box circuit, software and hardware design of the laser power-tester.
建立了一种大功率LED的封装结构，二次光学设计采用了微透镜阵列技术，运用光线追踪法研究了这种封装结构的光学性能。
A packaging structure of high-power LED was presented, microlens array was employed in the secondary optical design, optical properties of the package was studied using Trace pro.
在用于惯性约束聚变研究的高功率固体激光驱动器中，光学元件损伤的在线检测一直是强激光物理与技术研究的重点。
In the study of the high power solid laser for ICF, online inspection for optic damage plays an important part in the research of high laser physics and technology.
本发明能成倍或几倍地提高打标面积而不需要增加光学系统和激光器的功率。
It features that the labelled area may be increased by several times without increase in power of optical system and laser device.
然后通过调节外加的几何光学透镜，在长达100米的红外远距离大功率半导体激光器照明系统中将得到利用。
It will be used in the illumination system of high power semiconductor laser over a long infrared distance of 100 meters through adjusting an additional geometric optical lens.
采用经钨带灯标准光源标定的多道石英光纤光学系统，测量了HL-1装置等离子体可见光波段轫致辐射功率的径向分布。
Using a multichannel quartz optical-fiber system calibrated with a standard tungsten strip lamp, the radial profiles of the visible bremsstrahlung radiation power in the HL-1 tokamak were measured.
对谐振式集成光学角速率传感器IORS的关键器件之一——大功率、窄线宽光源进行了分析与实验。
A high power, narrow linewidth single frequency laser diode as one of the key elements of Integrated Optical Rotation Sensor (IORS) is studied.
在高功率固体激光驱动器中，参考波前标定是自适应光学系统应用过程中的关键技术之一。
In high power solid-state laser driver, the calibration of reference wavefront is a key technique in the use of adaptive optics system.
简述传统激光辐射功率量值传递和量程扩展方法，用经典理论和量子光学理论对传统方法进行了简要分析。
This paper briefly describs a method of quantity value delivery and range extension of laser radiation power.
高性能的美国射频激光管，完善光学系统，激光功率稳定，寿命长。
Radio frequency laser instrument with stable laser power and long life imported from USA perfect the optic system .
采用转换矩阵的处理方法，对大功率半导体激光器腔面光学灾变阈值与膜层结构的关系进行了分析。
Using the transition matrix method, the relationship between the catastrophic optical damage threshold and the coating structure of semiconductor lasers were analyzed.
介绍一种紧凑的、能以较低输入光功率工作的光学双稳器件，由光电检测器、光纤定向耦合器和半导体激光二极管组合而成的。
A compact, low input power optical bistable device, combined with photodetector and optical fiber directional coupler and semiconductor laser diode, was presented.
就大功率LED照明的光学设计中的一些问题做了实验、分析和计算机模拟。
The optical design of experiments of High-power LED lighting was done on some issues, analysis and computer simulation.
通过实验研究了温度这一参数对大功率LED光电参数的影响，为光学设计奠定了基础。
Experimental study of temperature through the parameters on the parameters of high-power LED photoelectric effect laid the foundation for the optical design.
对其光学性能进行了模拟分析，结果表明，该元件具有大调谐范围、低光功率损耗以及很小波长依赖性。
Numerical simulation of its optical performance shows that a high dynamic range, low optical loss, and relatively low wavelength-dependence can be achieved.
波前功率谱密度 （PSD）被用于评价惯性约束聚变激光驱动器光学元件在中频区域的波前误差。
The use of Fourier analysis techniques to measure the wavefront power spectral density (PSD) in mid frequency domain is discussed.
提出一种新的图像识别方法，直接利用输入图像和参考图像的联合变换相关功率谱进行双功率谱干涉，不需要特殊的光学元件，也不需要对功率谱进行调制和改造。
It realized the straight double-JPS interference of the JPS of input identifying image and reference one, and didn't need special optical components and improving the JPS variedly either.
经过光学封装技术的改善，可以大幅度地提高大功率LED灯串的出光率（光通量）。
By improving the optical encapsulation, the luminous flux of LED can be improved greatly.
该设备以大功率球形短弧气体放电氙灯为光源，设计了合理的光学聚焦系统、冷却系统及供电系统。
A sphere large-power short arc xenon lamp is used as the light source of this equipment. Deep ellipsoidal optical focusing system, cooling system and power source are designed reasonably.
应用推荐