本文采用一多功能流体动力学计算软件，详细计算分析了NASA低速离心压气机叶轮内部的三维速度场。
Based on a multifunctional CFD software, the three-dimensional velocity field within the impeller of NASA low-speed centrifugal compressor is computed in detail in this paper.
机器人工程师称其为“机电一体化”，它是力学，光学，电子学，计算机和软件的结合的产物。
Robot engineers call this "mechatronics" : the union of mechanics, optics, electronics, computers and software.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
采用计算流体力学软件CFX对超临界水冷堆主容器出口管的温度分布进行数值分析。
The numerical analysis was performed on temperature distribution of the outlet nozzles in main vessel of SCWR(supercritical water reactor) by using computational fluid dynamics software CFX.
借助机械系统动力学仿真分析软件ADAMS，探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下，机械手的控制效果。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
用有限元软件分别对原设计和改进方案进行了力学计算和分析。
The mechanics calculation and analysis are conducted to the original design and improvement plans with finite element software.
软件的主要功能是对制冷剂热力学参数进行查询，本软件将对制冷装置设计计算问题起到简化作用。
The main function of this software is inquiring about refrigerant thermodynamics parameter, it will work simplification function to the design and calculation of refrigeration equipment.
行人和疏散动力学的研究在步行设施的设计，人群的安全疏散，城市规划及计算机疏散软件开发等方面具有重要意义。
The research of pedestrian and evacuation dynamics has significant meanings for the design of pedestrian facilities, crowd safety evacuation, city planning and the exploitation of evacuation software.
首先，本文说明了研制网格生成软件对于促进计算流体力学研究和应用的重要意义。
First, this paper shows that grid generation software has important significance for the research and application of computational fluid dynamics.
采用纤维模型法和有限元软件ABAQUS计算了火灾下型钢混凝土梁的变形以及耐火极限，初步了解了型钢混凝土梁的高温力学性能。
The fiber model method and finite element software ABAQUS are applied to calculate the deformation of steel reinforced concrete (SRC) beams under fire and fire resistance.
利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
从试验设计角度出发，借助动力学仿真软件ADAMS开发的内弹道计算模块，对内弹道循环进行了随机模拟。
From view of design of experiment, the random simulation of interior ballistics repetition is done using the interior ballistic computing module developed by the dynamic simulation software-ADAMS.
通过ADINA有限元软件，建立了典型PCC单桩复合地基计算模型，分析了各种影响因素对PCC桩复合地基力学性状的影响。
Using finite analysis software ADINA, a typical single PCC pile composite foundation model is established. And the influence factors on the mechanics property are conducted.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
采用FLUENT计算流体力学软件对糖化锅内的流场进行了模拟。
The inside field of the mash kettle is imitated with FLUENT software.
运用SIMPACK动力学软件，通过模拟计算，仅就交叉支撑装置对转向架动力学性能的影响进行了初步探讨。
By simulation and calculation, the influence of cross sustaining device to the dynamic character of bogie is basically discussed via the SIMPACK software.
为了预报毂帽鳍的水动力性能，采用计算流体力学软件对粘性流场中毂帽鳍的敞水性能进行计算研究。
In order to predict the hydrodynamic performance of propeller with boss cap fins, CFD software was used to calculate the its open water performance.
本文介绍了计算流体力学(CFD)以及CFX应用软件的特有模块、包含的数学模型和成功应用领域。
This paper describes the Computational Fluid Dynamics (CFD) and CFX software, as well as discusser it's special modules, mathematical models and successful application areas.
应用施工水力学方法建立了施工导流的联合泄流计算模型，在此基础上开发了施工导流联合泄流计算软件（CDHCS）。
This paper builds the models on combined discharge of various discharging methods during construction by applying the hydraulic computation theory and develops the software (CDHCS).
利用多刚体系统动力学软件，根据GB/T17426-1998标准对转向架的动力学性能进行计算和分析，对悬挂系统进行优化设计。
And on the basis of the criterion GB/T17426-1998, the dynamic performance of the bogie was calculated and analyzed, and the suspension system is optimized.
在此模型中，把实车上使用的控制软件和车辆数值计算机械结构模型结合起来，再现了倾摆主动控制装置的动力学。
In the model the dynamics of the tilting active control devices are reproduced, combining the numerical mechanical model of the vehicle with the control software used on the real vehicle.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
应用推荐