建立了薄片激光介质热力学计算模型。
The thermodynamic model for the thin-disk laser medium was established.
建立了CA6102型发动机机体有限元力学计算模型。
A mechanical model for finite element calculations of CA6102 engine c(?)
在应用模型法估计转化管剩余寿命中，本文提出了一个力学计算模型。
A computational model was presented in estimating residual life of reformer tubes by the method of model.
为模拟激光介质的温度、热应力的分布和变化，建立了激光介质热力学计算模型。
The thermodynamic model was established for analyzing the temperature and the thermal stress in laser medium.
研究了直接利用隧道施工监测的位移量测信息来判别隧道力学计算模型的原理和方法。
The theory and approach of model identification through using the information provided by in-situ displacement measurements during tunnel excavation monitoring are studied.
本文通过建立较为理想的力学计算模型，并结合传统算法。提出了一种新的手算方法。
Based on a dynamic model and traditional method in calculating, a new calculating method is studied in this paper.
本文研究了直接利用隧道施工监测的位移量测信息来判别隧道力学计算模型的原理和方法。
In this paper the principles and methods of mechanical calculation models for tunnel was judged by using directly the information of displacement measurement in monitoring of tunnel construction.
论文还建立了双功能墙的力学计算模型，并采用该模型研究了双功能墙的最大承载力和延性承载力。
A computational model of dual functional slitted wall is suggested. With the proposed model, the maximum load-carrying capacity and the ductile strength of dual functional slitted wall are computed.
以一种新的、更符合实际的力学计算模型-移动荷载下粘弹性地基板系统来研究场道的无损检测理论。
This paper is absorbed in the research of the nondestructive testing theory about airport rigid pavements, which is on semi_infinit e viscoelastic foundation to moving load.
轨道结构与桥梁共同作用的力学计算模型是解决轨道纵向位移阻力与梁轨相对位移相互作用计算问题的关键。
The key is that to resolve the interaction between bridge and track, that the mechanics model of this interaction, as well as rail longitudinal resistance to displacement between rail and beam.
由此可见，裂纹的定量辩识对动力学计算模型和裂纹参数搜索两方面的效率要求非常高，关系到其在工程实际中是否具有应用价值。
It can be seen that the efficiency of the dynamic model and the searching of crack parameters is crucial to the practical application of the quantitative crack identification techniques.
在管式离心机受力分析的基础上，建立了管式离心机吊轴的力学计算模型，并对吊轴的弯扭组合下的疲劳与断裂安全性作了分析计算。
This article establish the mechanics model of pendent axis of tube style centrifugal machine, analysis and calculate the fatigue and fracture safety property of pendent axis.
以弹性地基梁理论为基础，建立了上排钢管幕在超挖和欠挖两种工况下的力学计算模型，推导出钢管幕的挠度曲线及相应的控制方程。
Underexcavation and overexcavation models have been presented based on the elastic foundation beam theory and the corresponding deflection equations and other controlling equations have been deduced.
对于天然丝，他们的研究方法采用计算机模型，来帮助确定使天然丝材料具有卓越力学特性的分子与原子机制。
With silk, that means using computer models that help determine the molecular and atomic mechanisms responsible for the material's remarkable mechanical properties.
有关的问题有：通信可靠性，容错计算，技术诊断，力学模型等。
Related problems include: reliability of communication, fault-tolerance computation, technical diagnosis, models of mechanics, etc.
通过算例，证明本文提出的力学模型与计算方法的合理性与有效性。
The computation examples prove the reasonableness and effectiveness of the mechanical model and the computational methods presented in the paper.
计算结果均表明，本文的一维水动力学模型能较好地模拟漫滩河道的过流特征，并改善了漫滩河道洪水演进的模拟与预测能力。
Calculation results show that this model can simulate the characteristics of water flow in a floodplain river and can improve the capacity of flood routing simulating and predicting.
建立一种心血管循环系统的计算机仿真模型，即描述心血管循环系统内血流动力学变量变化规律的状态方程。
This paper presents a computer simulation model of the cardiovascular circulation system, which describes the blood flow dynamic law in the cardiovascular system by the state equation.
疲劳寿命的计算采用断裂力学方法，建立疲劳裂纹扩展模型和失效模式的极限状态方程。
Fatigue damage estimation of the tendons was made using fracture mechanics approach, establishing the fracture crack growth rate model and limit state equations for failure modes.
从流体微元出发，用计算流体力学（CFD）的方法建立热管生物反应器的传热数学模型。
Using the fluid differential unit, the heat transfer mathematic model of heat pipe bioreactor (HPBR) was established by the calculated fluid hydrodynamics (CFD).
有没有通用的动力学、热化学理论可用，可完全替代传统的纯理论计算模型实验的实验室工作。
There is no universal kinetic or thermochemical theory available, which could entirely substitute traditional experimental laboratory work with pure theoretical calculation models.
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
本文针对巨型结构体系，建立了巨型结构模拟施工过程的力学模型及计算方法。
In this paper, a mechanics model and a computing model which simulating construction process are presented for mega-frame structure.
通过建立脊柱前屈的力学模型，定量计算腰骶椎间盘承受的应力。
Based on mechanics model of spinal flexion, stress upon lumber intervertebral disc was quantitatively calculated.
针对厚板精冲过程中的各种问题，根据其工艺特点，建立了精冲计算力学模型，并分析了厚板精冲过程的力学状态。
Aimed at the problems of thick plate fine blanking process, a computational mechanics model based on its characteristic was established to analyze the mechanical state of the process.
采用有限元方法建立在车载作用下钢桥面铺装层的力学响应计算模型。
A computer model for the mechanical response of steel bridge deck surfacing under wheel loading is established by using the finite element method.
根据锚注机理，建立围岩锚注计算的力学模型。
According to the bolting-grouting mechanism, the mechanic model of bolting-grouting calculation was.
建立了新型开铁口机电动钻冲机构的力学模型，计算了它的固有频率和主振型。
Mechanical model of the drill carriage with rotation and vibrating hammer for the new type taphole drill is established.
显然，这一发现不仅对于建立正确的理论计算力学模型有重要作用，甚至对于舰船防护的研究乃至水中兵器的研究都有着重要意义。
Obviously, this discovery is important not only for the establishment of the correct theoretical and computational model, but also for the study of ship defense and underwater weapons.
在分析试验结果的基础上，提出了确定裂缝闭合弯矩(或应力)的力学模型和计算公式。
Based on the test results, the calculation model and the method for predicting crack closing moments (or stresses) are presented.
应用推荐