通过动态力学热分析证实了这一结论。
应用动态力学热分析技术研究了纳米介孔材料MCM - 41对有机玻璃PM MA动态力学行为的影响。
The effects of nanostructured mesoporous material MCM41 on the dynamic mechanical behavior of PMMA were studied by DMTA technique.
利用德国耐驰综合热分析仪对碳酸铈分解过程动力学进行了研究。
Thermal Decomposition reaction kinetics of cerium carbonate was investigated with Netzsch thermal analyzer.
通过动力学分析、热分析和静力分析的有机结合，对该类型结构计算进行了有益补充。
The analytical skill of structural analysis can be enhanced by this method which combines dynamic simulation analysis, thermal analysis and static analysis.
本研究以计算流体力学的方法，对电子构装产品的明日之星- - -球栅阵列封装方式，来进行详细的热传分析。
In this study, the computational fluid dynamics approach is employed to analyze the heat transfer for ball grid array package that is popular in modern electronic industry.
通过动态机械热分析（DMTA）考察了环境条件对复合材料动态力学性能的影响。
The effects of the environments on the dynamic mechanical properties of the pultruded CF/VE composite were studied by dynamic mechanical thermal analysis (DMTA).
介绍了空间实验室大面积太阳电池阵的方案构型，并进行了模态分析、热结构耦合分析和动力学仿真分析。
The configuration of large solar array in space lab is put forward in this paper, and the mode, thermal coupling and dynamics stimulation analysis is made.
分析了热剪刃的综合力学性能要求，并对表面堆焊高耐磨合金层的显微组织和性能进行了研究。
The comprehensive mechanical properties of the heat shears were analyzed and the microstructures and properties of the surfacing high wear resisting alloy layer were studied.
运用热重分析手段对几种阻化剂进行了实验研究，运用化学反应动力学方程计算得到了原煤样与阻化煤样的活化能。
Thermogravimetric analysis technique was used to study several inhibitors and the activation energy of original coal samples and coal-like ones was gained by the chemical reaction dynamic equation.
主要涉及的内容包含每个设备部件的应力、疲劳、热棘轮、断裂力学分析和内部构件流致振动分析以及试验验证等。
The design mainly involves the analysis of the stress, fatigue, thermal ratchet and fracture mechanics, the analysis of flow-induced vibration of the internals and the test verification.
本文运用热弹性力学原理，分析了温度变化对啮合齿轮侧隙的影响以及对齿厚偏差选择的影响。
Based on the thermal elastic mechanics, the influence of temperature change on the normal backlash was analyzed, and the deviation of teeth width was calculated.
结合COMI炼钢工艺冶金反应热力学分析、物料及能量计算及热态实验研究，证实了COMI炼钢工艺的可行性。
Based on metallurgical reaction thermodynamic analysis, materials and energy calculation and thermal test of COMI steelmaking process, the feasibility of COMI steelmaking process could be confirmed.
分析了在非对称热渗流域多孔介质中热渗流—力学耦合的几个典型问题。
Several typical problems of heat seepage mechanical coupling of porous media in asymmetric heat seepage domain are analyzed.
为了深入研究，我们在模型中采用离散热力学分析并定义了在机床导轨热控制中广义热阻的概念。
For the deep research, we apply the discrete thermodynamic analysis and define the concept of the virtual thermal resistance in the heat control of the machine tool guide.
对原始木屑和阴燃固体产物进行了元素分析、工业分析和热重分析，并且计算出原始木屑和炭的化学动力学参数。
Elemental and industrial analyses and TG experiments on origin wood and solid product of smolder are studied. In this part, chemical kinetics parameters are also gained.
对薄膜样品进行了红外光谱分析和热分析，测定了力学性能，在扫描电子显微镜上观察了薄膜拉伸断面。
The PEN/PP films were characterized by FTIR and thermal analysis, the mechanical properties were tested, the tensile fracture surfaces of PEN/PP films were observed by SEM.
通过热力学第二定律，从理论上分析熵变与热温商之间的关系，再进一步由实践验证。
The paper discusses the relation of entropy change and quotient of heat-temperature based on the second law of thermodynamics.
用程序升温对中间相热转化过程进行动力学参数计算，并对计算结果作了简要分析。
Program temperature rise is used for calculating dynamic parameter in thermal conversion process of interphase, and a brief analysis is made for calculated result.
在空气和氮气中，利用热重分析法和动力学分析方法，对硫化胶的热稳定性进行了研究。
The thermal stability of the vulcanizate in air and nitrogen was studied by thermogravimetry and kinetic analysis .
第三章对煤的热解特性及其动力学进行分析。
In chapter three the pyrogenation character and kinetics of coal were researched.
利用热重分析(TG)和微商热重分析(DTG)研究了天然橡胶、异戊二烯橡胶和顺丁二烯橡胶的热解动力学。
The pyrolysis dynamics of nature rubber, isoprene rubber and butadiene rubber was investigated by thermogravimetry analysis (TG) and differential thermogravimetry analysis (DTG).
计算结果用于热工水力设计、安全和力学分析。
The results have been applied to the thermo-hydraulic deigning , safety and mechanics analysis.
研究了纯镍铸铁焊条冷焊时，稀土金属镧、铈、镨、钇及钕对焊缝热裂纹敏感性的影响规律，并分析了铈对焊接接头力学性能和加工性能的影响。
The influence of Lanthanum, Cerium, Yttrium, Praseodymium and Neodymium on weld hot cracking susceptibility of the pure nickel electrode used for cold welding of cast iron was studied.
通过分析生物质热解的物理特性和运行条件，采用动力学模型和传热、传质模型，对生物质热解进行描述。
By analyzing the physical characteristics and the operation condition of biomass pyrolysis, the biomass pyrolysis is described using kinetic model and heat and mass transfer model.
论述了示差扫描热分析(dsc)和热重分析(TG)在研究非晶态合金退火转变动力学方面的应用。
Applications of differential scanning calorimetry (DSC) analysis and thermal gravity (TG) analysis in the study on kinetics of annealing transformation of amorphous alloys have been discussed.
本文从阻燃化学反应、化学键能、热传递和反应动力学角度分析卤素类阻燃剂的阻燃机理。
The flame retardant fundamentals were discussed based on the flame retardant chemical reactions, bond energy, heat transfer and reaction kinetics aspects.
上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用。
The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal change rule of the title compound.
对PP复合材料进行力学性能测试、断口形貌观察、XRD结构分析、DSC热分析等分析。
Mechanical properties of composite PP were tested, and also fracture analysis, XRD analysis; DSC analysis had been done to the composite PP.
研究了静态铝热SHS陶瓷涂层，分析了涂层的成分、组织形态、力学性能和耐蚀性能。
This paper investigated the static thermit SHS ceramic coating. The composition, microstructure, mechanical properties and corrosion resistance of the ceramic coating have been analysed.
对金川二次铜精矿氧气自热熔炼过程进行热力学分析。
The oxygen autogenous smelting process of nickeliferous copper concentrate from Jinchuan Nonferrous Corp.
应用推荐