集成控制的关键之一是动力学模型的建立。
A major point of integrated control is to establish dynamics models.
目的研究兔股骨三维生物力学模型的建立方法。
Objective To discuss the method of constructing biomechanical model of rabbit femur.
本文主要介绍隔震结构等代体系力学模型的建立过程。
In this paper, the process of building the mechanical model of the isolated structure equivalent system is chiefly introduced.
该结果可为催化重整单事件反应动力学模型的建立提供理论基础。
The results provide the foundation for establishing the single-event micro-kinetic model of catalytic reforming.
以1,1,1 -三氯乙烷为例介绍生理药代动力学模型的建立。
Introduction to Physiologically Based Pharmacokinetic Model Construction: an Example of 1, 1, 1-trichloroethane.
本文研究了传染病动力学模型的建立以及控制传染病策略两类问题。
In this paper, the establishment of the epidemic diseases models and controlling strategy are studied.
本文比较系统和全面地介绍讨论了振动系统力学模型的建立与改进问题。
In this paper the problem of modeling vibration systems and model improvement is discussed.
动力学模型的建立对研磨效果的预测和指导研磨参数的确定具有较大的意义。
The establishment of milling kinetics model has a great meaning on forecasting of milling effect and determining milling parameter.
对故障诊断的方法，转子动力学模型的建立和振动信号的分析也作了一定的研究。
The methods of fault diagnosis, the kinetics model of rotor and analyze of vibration signal were also discussed.
概述地说，围绕上述问题所开展的具体研究内容包括以下方面：1。碰摩转子系统非线性动力学模型的建立。
Summarily speaking, the detailed research content based on problem above is as follows:1. The establishment of nonlinear dynamical model for rub-impact rotor system.
论述了胶带输送机整机动态分析中离散系统力学模型的建立方法，从而为胶带输送机的动特性分析提供了一个新途径。
The mechanical model of discrete system is built to describe the dynamic characteristic of rubber belt conveyer. Thus a new way of dynamic analysis is given for rubber belt conveyer.
整车动力学模型的建立为更加精确的进行车路耦合作用计算提供可能，可以模拟出实际车辆在波形路面激励下产生的动荷载作用值。
The vehicle model provides possibility for more accurate compute and it can simulate the dynamic vehicle loads of real vehicles on wave road.
蛋白酶促水解通用集总动力学模型的建立：根据蛋白酶促水解机理，对水解过程做出合理假设，推导出描述微观反应的本征动力学方程。
Establishment of universal lumping kinetic model: on the basis of hydrolysis mechanism, hypotheses about the hydrolysis process were made, and the intrinsic kinetic equation was deduced.
我们基于第二定律的简单表述用最优控制理论作为建立情感动力学模型的新方法。
Building on a simple version of the second law we use optimal control theory as a novel approach to model sentimental dynamics.
这些结果可以作为建立PUR泡沫塑料力学模型的基础。
These results can be used as the basis of setting up mechanical model of PUR foam plastics.
本文研究石油机械企业多产品生产的规划决策问题，运用系统动力学的原理建立了相应的系统模型。
This paper researches the planning and decision making problem of petroleum mechanical multiproduct enterprises, and establishes the corresponding system model by using systematic dynamic principle.
建立卫星姿态动力学数学模型，并分析星体所受的外部扰动力矩。
Mathematic model of satellite attitude dynamic is set up, and external disturbance torque is analyzed.
突变理论为建立系统的复杂动力学模型提供了一个清晰的框架。
Catastrophe theory provides a coherent framework for modelling the complex dynamics of systems.
提出了用等效粘性阻尼理论和试验相结合，建立金属橡胶材料动态力学模型的一种新方法。
A new method for setting up the dynamic model of metal-rubber materials was proposed by using the equivalent viscous damping theory.
文章建立了电动转向器的动力学模型，并对该模型进行分析。
In this paper, the dynamic model of the electric power steering has been established.
选取江苏省镇江市为例，运用系统动力学方法建立了该市的环境经济系统模型。
With the method of system dynamics, the model of environmental economic system of Zhenjiang city in Jiangsu province is set up.
在此基础上分析了操作臂的运动学和静力学关系，建立了并联柔性系统的动力学模型。
Then, the kinematics and statics of the manipulator are studied, and a dynamic model of this parallel flexible system is established.
将铰接式车辆简化成六自由度的动力学系统，建立了能反映率体平面运动和横向摆动的动态数学模型。
In this paper, the articulated vehicle is simplified to a six-free-degree system in dynamics, and a dynamic mathematical model was derived and established.
以大位移井钻柱的部分或整体为研究对象，提出了钻井各种动态问题，建立了钻柱的各种动态行为的力学模型。
The drill string of ERW is taken as research object, the dynamic problem is brought forward during making hole, and the mechanics model about each dynamic action is established.
疲劳寿命的计算采用断裂力学方法，建立疲劳裂纹扩展模型和失效模式的极限状态方程。
Fatigue damage estimation of the tendons was made using fracture mechanics approach, establishing the fracture crack growth rate model and limit state equations for failure modes.
运用经典的哈密顿正则方程，建立了冲击式压实机的参数化动力学模型。
The parameterized dynamic model of the impact compactor is made based on the classical Hamilton's canonical equations.
运用经典的哈密顿正则方程，建立了冲击式压实机的参数化动力学模型。
The parameterized dynamic model of the impact compactor is made based on the classical Hamilton's canonical equations.
应用推荐