本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
采用计算流体力学软件CFX对超临界水冷堆主容器出口管的温度分布进行数值分析。
The numerical analysis was performed on temperature distribution of the outlet nozzles in main vessel of SCWR(supercritical water reactor) by using computational fluid dynamics software CFX.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
以现场数据为基础，利用计算流体力学软件FLUENT6.3为计算平台对焙烧炉进行了数值模拟研究。
Based on the field data, numerical simulation of the baking furnace is carried out using computational fluid dynamics software FLUENT6.3 for the computing platform.
在此模型中，把实车上使用的控制软件和车辆数值计算机械结构模型结合起来，再现了倾摆主动控制装置的动力学。
In the model the dynamics of the tilting active control devices are reproduced, combining the numerical mechanical model of the vehicle with the control software used on the real vehicle.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
基于经典波浪理论，以大型商业计算流体力学软件CFX为平台，可以实现数值造波及波物作用的模拟计算。
Based on the principle of wave, the simulation of wave generator and wave or wave-current forces on circular cylinder is presented by using CFX.
利用计算流体力学软件对煤油在所设计的双模态超声速燃烧室内的超声速喷雾燃烧进行了数值模拟。
Numerical analysis of the kerosene spray supersonic combustion was carried out in the dual-mode supersonic combustor with the CFD software.
方法采用计算瘤体力学（CFD）软件结合顶端动脉瘤的医学影像，对动脉瘤内血液流动行数值模拟。
The profile meshed by some computational fluid dynamics (CFD) software is used to simulate the blood flow within aneurysm.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
利用计算流体力学通用软件FLUENT对整体流场和定转子间隙区流场中周向流速度场进行了数值模拟，并对理论分析进行了补充。
The field of whole flow field and tangential velocity between stator and rotor were imitated based on FLUENT. The analysis in theory was replenished.
本文联合使用计算流体力学软件FLUENT和可以计算表面反应的化学反应动力学软件DETCHEM对有逆流换热的微尺度燃烧器进行了数值计算。
In this paper was preformed numerical simulation for micro-scale combustor with counterflow heat exchanger using both CFD FLUENT and surface chemistry subroutine DETCHEM.
利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。
The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.
通过数值计算结果和SAMCEF软件仿真结果的对比，验证了本文所建动力学模型的有效性和正确性。
The comparison results of the numerical simulation and SAMCEF software showed that the effectiveness and correctness of the dynamic models proposed in this dissertation.
应用计算流体动力学软件FLUENT，对QD128航改燃气轮机燃烧室进行了三维数值模拟计算分析。
The 3D numerical simulation of the QD128 aero-derivative gas turbine combustor was performed by using computational fluid dynamics(CFD) software FLUENT.
利用计算流体动力学软件(CFD)，对某660MW超临界发电机组直接空冷排汽管道内的水蒸汽流场进行了三维数值模拟研究。
CFD software is used to perform 3-d numerical simulation of steam flow field inside direct air-cooling exhaust steam pipe of a 660 MW supercritical unit.
本文用计算流体力学软件FLUENT6.2对燕山石化公司E-BA - 107乙烯裂解炉辐射段内的燃烧和裂解反应做了三维数值模拟研究。
In this paper three-dimensional combustion and pyrolysis reactions in the firebox of E-BA-107 ethylene cracking furnace of Yanshan Petrochemical Corporation were simulated by CFD software FLUENT6.2.
本文用计算流体力学软件FLUENT6.2对燕山石化公司E-BA - 107乙烯裂解炉辐射段内的燃烧和裂解反应做了三维数值模拟研究。
In this paper three-dimensional combustion and pyrolysis reactions in the firebox of E-BA-107 ethylene cracking furnace of Yanshan Petrochemical Corporation were simulated by CFD software FLUENT6.2.
应用推荐