功能节段生物力学性能测试。
The regular biomechanical test made on the function of spinal unit.
介绍了一种新型的智能化铸造型砂多项力学性能测试系统。
A new intelligent multi-properties tester of molding sand is introduced in this paper.
经过焊接工艺性能和焊缝金属力学性能测试，最终确定最优配方。
The optimum prescription was finally determined by the property tests of the welding process and weld metal.
对样品进行了力学性能测试并采用SEM对它的冲击断面进行研究。
Then the samples were investigated by means of mechanical (property) measurements and SEM.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
在已经开展的这一方面的研究工作中主要是进行松质骨试样的宏观力学性能测试。
General ways used to study the macro mechanical properties of cancellous bone are measuring deformation of integral bone samples.
根据力学性能测试的结果，最终确定对添加A类稀土合金的材料进行进一步的研究。
According to the result of mechanical performance testing, the research focused on specimens that had been added class a rare earth alloy.
用扫描电子显微镜(sem)和力学性能测试对复合材料的结构和性能进行了表征。
It characterized the structure and feature of the nanocomposites through SEM and tests of mechanical properties.
力学性能测试结果表明，除在临界二相区加热外，二次热循环均使粗晶区得到初化。
The results show that toughness of the coarse grained HAZ is improved after second welding heat cycle except intercritical two-phase heating.
采用宏微观检验、化学成分分析及力学性能测试方法对截止阀阀体爆裂原因进行了分析。
This paper studied the causes of bursting of stop valve by the methods of visual inspection, metallographical examination, chemical analysis and mechanical property test.
力学性能测试表明，与纯聚乙烯相比，环氧树脂增强聚乙烯材料的弯曲强度有较大提高。
The static test of mechanical properties suggest that the flexural strength of PE/EP is higher than pure PE.
在对混凝土试样的物理力学性能测试分析的基础上，开展材料抗渗性能和浇筑工艺研究。
On the base of test analyse about its physical and mechanical properties, developing material study of impermeability and cast technics.
结果表明，设置试验机的控制参数、拉伸速度和试样尺寸等均对力学性能测试结果有影响。
The result showed that these parameters were affected by the controlling parameters and tensile velocity of the machine and dimensions of the samples.
对PP复合材料进行力学性能测试、断口形貌观察、XRD结构分析、DSC热分析等分析。
Mechanical properties of composite PP were tested, and also fracture analysis, XRD analysis; DSC analysis had been done to the composite PP.
本文介绍了利用光学金相、力学性能测试方法对轧辊联轴节进行了失效分析并提出了断裂原因。
The present paper describes the failure analysis of roller -coupling by testing the optical, metallographic and mechanical properties, offering you the fracture reasons.
随炉试样力学性能测试结果表明，屈服强度较高， 伸长率偏低，无法满足该零件技术要求。
The mechanical property testing showed that the yield strength is too high and the elongation rate is less than the technical requirements.
本测试车不仅适用于桥梁工程的现场测试，也可用于其他工程结构或机械设备的力学性能测试。
This bridge testing vehicle can also be used for other engineering structure testing and mechanical equipment testing.
对经多种热处理工艺处理的四种钢材，在水轮机模拟圆盘仪上进行了磨蚀试验及力学性能测试。
The abrasion experiments and mechanical tests of 4 kinds of steels treated with heat are conducted on hydraulic turbine simulation disc equipment.
采用力学性能测试、显微组织分析等方法研究了终冷温度对双相大变形管线钢的力学性能的影响。
The influences of quenching temperature on mechanical properties of the pipeline steel were investigated by means of microscopic analysis and mechanical property test.
采用化学分析、力学性能测试和金相检验等手段，对某电站汽轮机主油泵轴的早期断裂进行了分析。
Chemical composition analysis, mechanical property test and microstructure examination were used to analyze the early fracture of power plant's turbine main oil pump shaft.
采用力学性能测试、扫描电镜、红外光谱（FT-IR）等方法研究了硬质聚氯乙烯的热老化性能。
The heat aging properties of rigid PVC are studied by means of mechanical properties test, SEM and FT-IR.
从室内力学性能测试与工作模态分析结果来看，已经加工出的滚道式减速器基本达到预期技术要求。
The result of test and analysis proves the raceway reducer has been made with desired technical parameters.
利用我国现有的力学性能测试手段全面研究了硝化棉含氮量对叠氮硝胺发射药低温力学性能的影响。
The article studies the influence of nitrogen content of nitrocellulose on the mechanical properties of the diazidonitrazapentane(DIANP) propellant (DA propellant).
力学性能测试结果表明：纳米复合PZT陶瓷的弹性模量较普通PZT陶瓷有明显提高，约提高36%；
The test results of mechanical properties indicate: elastic modulus is much higher than that of common PZT ceramics, with increasing about 36%.
对氮化硅结合碳化硅材料进行了掺入稀土的系统实验，并对产品进行了力学性能测试和X射线衍射测试。
A systematic study of doping rare earths into the silicon nitride bonded silicon carbide material had done. The results of X-ray diffraction and mechanics properties testing were obtained.
采用光学显微镜、扫描电镜观察和力学性能测试研究了熔渗处理对高合金铁基材料显微组织和性能的影响。
The effect of infiltration process on the microstructure and properties of iron-base materials with high alloying elements content was studied by metallography, SEM and mechanical property tests.
用自制的绢云母质无机紫外屏蔽剂改性聚丙烯（PP），对光老化后的PP复合材料进行力学性能测试。
The polypropylene(PP) was modified by self-made sericite-based inorganic UV-screen agent, and the mechanical properties of the PP composites after light aging were tested.
力学性能测试结果表明，随着烧结温度的升高，70W_2B_5/C复合材料的断裂性与维氏硬度均增加。
The mechanical properties results show that the fracture toughness and Vickers hardness of the 70W_2B_5/C composite increase with the sintering temperature.
通过化学成分分析、力学性能测试、金相检验以及断口分析等方法对SKD61钢压铸模具开裂原因进行分析。
The cracking causes of the die casting mould of SKD61 steel were analyzed by chemical composition analysis, mechanical property testing, microstructure examination and fracture analysis.
介绍了MTS810陶瓷试验系统的工作原理及其在陶瓷材料各种常温及高温动、静态力学性能测试中的应用。
The principle and features of MTS810 are introduced, and the applications of MTS810 for evaluating mechanical property of ceramics in normal and high temperature environment are discussed.
应用推荐