爱因斯坦的想法在他死后的实验中得到了验证，由于这些实验大多支持传统的量子力学，爱因斯坦的方法几乎必然是错误的。
Einstein's ideas have been tested by experiments performed since his death, and as most of these experiments support traditional quantum mechanics, Einstein's approach is almost certainly erroneous.
该文在延迟系统逆动力学过程定性分析的基础上，对传统模糊控制器加以改造，提出一种新的适合于迟延系统的控制方法。
Based on the qualitative analysis to inverse dynamics of delay system, through modifying conventional fuzzy controller, a new control method which is fit for delay system is presented.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
突破了从宏观上研究沥青混合料的传统方法，提出以流体力学研究混合料的粒料运动的全新研究方法。
It breaks through the traditional way to study asphalt mixture in macro, and suggests a whole new research method on studying granular material movement of mixture with fluid mechanics.
文中通过对传统的复合板模型进行改进，提出一种能同时测试涂层多个力学性能参数的方法。
A new method was developed to measure the mechanical properties of tin coating once through improving traditional composite model.
应用传统强度理论和细观力学方法对几种韧性材料在复合载荷条件下的断裂机理、启裂位置、开裂方向进行了实验分析和应力场计算。
In this paper, fracture mechanism, position and direction of crack initiation of mixed mode fracture in several ductile materials are tested, and stress distributions of which are analyzed.
20世纪40年代以来，新材料的出现和新工艺的使用在物质观念和研究方法上对传统的力学工作提出了挑战。
Since the 40's in 20th century, the advent of new material and the use of new product technology have challenged the traditional study in mechanics.
按体积比设计沥青混合料的方法可以在不明显提高造价的前提下，较传统技术显著提高沥青路面的力学性能和表面功能。
Under not obvious increasing the project investment circumstances, volume method for bituminous mixture is obvious to increase the mechanics performance and the surface function as a wearing course.
传统计算方法未考虑卸荷效应对岩体力学参数的弱化。
The effect of unloading is not considered in the traditional slope stability analysis method.
本文通过建立较为理想的力学计算模型，并结合传统算法。提出了一种新的手算方法。
Based on a dynamic model and traditional method in calculating, a new calculating method is studied in this paper.
用传统的材料力学方法设计应变天平时要作较大的简化。
Traditional mechanics of materials method applied to designing strain-gauge balances is simplified much more.
此外，通过传统的质点方法和行驶动力学，以缓和曲线长度为例对线路设计参数进行了计算。
In addition, calculations through traditional method such as particle means and driving dynamics for line design parameters are also done.
为解决机构复杂的拟人机器人运动学和动力学问题，提出了基于传统机理结合神经网络的建模方法。
To resolve the kinematics modeling and dynamics modeling of a humanoid robot with complicated machine, a modeling method based on the conventional mechanism combined with neural network is presented.
以外白渡桥为例，详细介绍了一套综合传统疲劳分析和断裂力学的混合方法，并用以计算老钢桁梁桥剩余寿命。
With this method the remaining fatigue life and safety of old riveted truss bridge were calculated with Waibaidu bridge as an example.
随着过山车速度及运动复杂性不断提高，其研制过程的动力学分析、安全评价愈显重要，传统方法已很难满足要求。
The dynamic analysis and safety evaluation is important during the period of developing a roller coaster for its high speed and complex motion.
带伸展柔性附件航天器的动力学方程是刚-柔耦合的时变非线性动力学方程，用传统方法求解其动力学响应时会遇到很大的困难。
The dynamic equation of the spacecraft with extensional flexible appendages system is time variable and nonlinear, so it is very difficult to solve this kind of equation with traditional methods.
目的：观察快速和传统方法聚合热凝基托树脂后其力学性能的变化。
OBJECTIVE: To observe the effects on the mechanical properties of denture base resin polymerized by different methods.
用传统的表面处理方法可改善纳米粒子的分散性与力学性能，少量纳米粒子可使PP同时获得增强增韧。
The conventional treatment method could be used to improve the dispersivity of the nano-particles and mechanical properties of…
传统的几何积分法、概率积分法解决不了的一些难题，用力学方法可能得到解决。
Some difficult problems which can not be solved by the conventional methods, such as geometric method and probability integration.
由于受传统的经济建模理论的影响，他们所采用的是基于动力学理论的建模方法。
Because of influenced by traditional economic theories, they adopted modeling methods based on dynamics.
针对传统的大型圆形贮液池力学分析方法计算复杂、精度不高的问题，运用微分求积法对圆形贮液的线弹性静力问题进行了研究。
This paper deals with the application of the differential quadrature method to the linear elastic static analysis of circular concrete tanks without prestressing.
作者在计算中考虑了滑油的压粘效应，并对传统的静力学计算方法进行了动力学修正。
The oil pressure-viscosity effect is considered in the calculation, and a modification with dynamic theory is made to the traditional statics calculating procedure.
介绍了超低碳贝氏体wdb620钢的力学性能，用几种传统的焊接性试验方法对该钢焊接接头的力学性能及抗裂性进行了研究。
The mechanical properties of steel WDB620 are introduced. Some traditional tests about the mechanical properties and cracking resistance on its welded joint have been made.
由于分子的高激发振动态具有很强的模间非线性偶合以及能量的传递，传统的动力学方法似乎很难有效地用来研究其性质。
The system is considered as classical based on the fact that the highly excited vibration is of high energy and approaches the classical realm.
本文将传统的螺旋桨动量理论与计算流体力学的方法相结合，数值模拟螺旋桨滑流对其后部件气动特性的影响。
This thesis concentrates on the application of CFD techniques to simulate the effect of turbo-propeller slipstream on the parts behind the propeller.
汽车空气动力学研究的传统方法是风洞试验，此方法对试验设施要求较高，并且研究周期较长。
The traditional and important method for the vehicle aerodynamics is wind tunnel test, which demands strict requirement of the experimental facilities, as well as a long experimental period.
而本文利用的计算流体力学的方法进行探索并与传统的理论分析方法、实验测量方法组成了研究微观驱油机理的完整体系。
The method of Computational Fluid Dynamics used in this article, in union with those traditional ones forms a complete study system of micro-displacement's working mechanism.
同时，还解决了两体问题。突破了传统上的对双质点力学体系的一般处理方法，收到了举一反三的效果。
It is also a break away from the traditional treatments of two-particle system, and better results can be obtained.
传统船舶动力学理论是基于刚体假设之上的，本文表明如何用水弹性力学方法计算这种波浪响应。
The traditional dynamical theory of ship has been founded largely on the assumption of rigidity. This paper shows how the wave responses of a ship can be calculated by approach of hydroelasticity.
传统的固体力学方法在描述岩石的各种地质因素与其力学性态之间的复杂非线性关系时存在困难。
It is difficult to describe the complex nonlinear relationship between all kinds of geological factors of rock and their mechanical behaviors.
应用推荐