在归纳大量典型算例的基础上，总结出多高层结构抗剪扭的一些内力分布特征。
Some internal force distribution features of tall building structure are concluded on the basis of a great quantity of typical calculated examples.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
In this paper, theoretical analyses on the torsional behavior of CFS strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
Experiments on the torsional behavior of carbon fiber sheet (CFS) strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
本文在试验研究的基础上，对钢筋混凝土矩形截面弯剪扭构件截面限制条件进行分析，提出了实用计算公式。
Based on the experiment, this paper analyses the limitation of section in rectangular reinforced concrete elements subjectal to combined bending, shear and torsion and presentsthe practical formulae.
通过动扭剪试验研究饱和粉煤灰的动孔隙水压力特性、动强度特性以及振陷变形特性。
Some behaviors of saturated flyash such as pore water pressure, dynamic strength, and dynamic deformation are studied by the dynamic torsional shear test.
高层建筑箱形转换层具有应力分布合理和抗弯、抗剪、抗扭刚度大等结构特性。
The box transition storey of tall building has the characters of rational stress distribution and large stiffness of bending, shearing and torsion.
利用河海大学与日本圆井株式会社共同研制的一种新型的多功能静动三轴仪进行了不排水循环扭剪试验。
Tests with the static-dynamic dual purpose triaxial compression test apparatus which was manufactured by Hohai University and Japan Round Well Company have been completed.
本文采用应变控制和应力控制两种控制方式对饱和砂土进行了大量的振动扭剪试验。
This paper presents the test results of a series of dynamic cyclic torsional shear tests on saturated sands using both stress-controlled and strain-controlled process.
弯、剪、扭复合作用下的予应力工字梁，由于翘扭变形的存在，使得对它进行理论研究和实验研究非常困难。
Owing to the existing warping torsion, it has been rather difficult to make a theoretical and experimental study of the prestressed concrete I -beams under combined mixed torsion. flexure and shear.
对磷酸氧化铜无机胶套接扭剪试件在不同粘接表面状态，不同固化条件下的扭剪强度进行了系统测试，得出了对实际应用有价值的结论。
Under various adherent condition and solidify condition, the Torsional shear strength of the copper phosphate inorganic adhesive were tested. The results which are useful to application were obtained.
这种地震填空，主要发生在那些扭压型和剪滑型的断裂带上。
This kind of earthquake filling and packing is mainly on the zones of torque-compression type and shear slip type.
基于对较高精度的砂土扭剪试验成果的分析，表明砂土的剪胀是由一个完全可逆的体应变分量和一个不可逆的体应变分量构成的。
The volumetric strain due to stress dilatancy of sand is found to be composed of a reversible dilatancy component and an irreversible dilatancy component.
通过循环三轴试验建立了软粘土循环强度预测模型，并通过循环扭剪试验检验模型的稳定性。
A cyclic strength prediction model of soft clay is established through lots of cyclic triaxial test results.
此外还对剪—扭关系进行了较详细的分析和讨论。
Furthermore, the relationship between the shear and torsion of the members is analyzed and discussed in detail.
按照材料各自用途不同，其必须具有足够的抗拉、抗压、抗剪、抗弯或是抗扭强度。
Material should be adequately strong when subjected to tension, compression, shear, bending or torsion as per the intended use.
扭剪型螺栓破断沟槽的加工采用数控技术、提高沟槽加工精度，确保配套质量；
Adopting the computerized Numerical Control Technique to machine the breakage groove of torshear type bolts can improve the machining precision of groove, guarantee the assembled quality.
钢结构系列：钢结构用高强度大六角头螺栓，扭剪型螺栓连接副，钢网架球节点用高强度螺栓，焊钉，钻尾丝等。
Steel Series: steel with high strength large hexagon head bolts, torsion shear bolt connections made, the steel truss joints of high strength bolts, studs, drill the end of wire.
为了研究土的剪切波速与其三轴剪切试验力学指标之间的关系，依据扭剪振动原理，开发出一种测试三轴压力室内土样剪切波速的传感器。
Torsion shear wave transducer is a newly developed device to test the shear wave velocity of soil specimen which has not been reported before.
大六角头高强度螺栓连接副扭矩系数的检测，扭剪型高强度螺栓连接副坚固预拉力的检测，高强度螺栓连接磨擦面抗滑移系数的检测，是钢结构材料验收中的重要测量。
To determine the anti-slip coefficient of the high-strength bolt which connects components of friction surface, it is screwed and determined by torsion and tensile testing machines respectively.
大六角头高强度螺栓连接副扭矩系数的检测，扭剪型高强度螺栓连接副坚固预拉力的检测，高强度螺栓连接磨擦面抗滑移系数的检测，是钢结构材料验收中的重要测量。
To determine the anti-slip coefficient of the high-strength bolt which connects components of friction surface, it is screwed and determined by torsion and tensile testing machines respectively.
应用推荐