本文利用层剪切模型探讨了隔震、消能减震结构的分析和设计方法。
In this paper, the analysis and design method of base seismic isolated and energy dissipated structure using the MDOF model has-been studied.
基于能量耗散的接触面应力应变3参数模型，建立了接触面正向剪切模型。
A new interface constitutive model neglecting previous shear ratio is presented on the basis of above established 3-parameter stress-strain model.
多层框架结构侧向变形主要为层间剪切变形，其刚度矩阵常采用层间剪切模型；
The lateral deformation of multistory frame structure may mainly be shearing displacement between stories, and shearing model between stories may frequently be adopted in analysis of rigidity matrix.
该方法中钢筋混凝土框架整体结构采用层间剪切模型，柱采用四线性恢复力模型。
In this method, an inter floor shear model is adopted for the whole RC structure; and a quadrilinear recovery force model, for the RC inter floor columns.
应用本文的方法对剪切模型框架结构上安装的锚索控制器进行了控制器的总体优化设计。
The global optimal design for the control system of frame shear structure with tendon control devices installed on the structure is conducted for the control systems.
根据X型圆管相贯节点的破坏模式，总结了相对应的三种分析模型环向模型、冲剪模型和剪切模型。
Based on the breakage mode of circular tubular X-joints, three analytic models are summarized: round-direction model, clash-cut model and cut model.
然后，在对三维有限元分析结果研究的基础上，建立了环缝处的纵向螺栓剪切模型，利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度；
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
模型成功地被证实并使用于模仿在剪切和双轴向负荷下反应程度依时间变化的组织工程纤维环。
The model was successfully validated and used to simulate time-varying responses of engineered AF under shear and biaxial loading.
根据非局部连续介质模型，提出了一维二阶剪切应变率梯度格式。
One dimensional shear strain rate gradient formation of the second order is proposed based on the non-local continuum model.
本文首先从切削剪切变形和刀具离散化理论出发，推导出高速铣削条件下铣削力和切削速度的关系模型。
A relation model between cutting forces and cutting speed is established for high speed milling condition on the basis of research into the theory of shear distortion and the discrete milling cutter.
模型预测证明纤维能抵抗剪切力甚至当剪切力方向和纤维方向不一致时。
Model predictions demonstrated that fibers resist shear even when the shearing direction does not coincide with the fiber direction.
定义了用等效剪切刚度表示的损伤变量，建立了一个分三阶段表述的岩石动态剪切损伤本构模型。
By introducing a damage variable expressed by the equivalent shear stiffness, a dynamic shearing damage constitutive model of rock is established including three phases.
本文在大量动态直剪试验的基础上，建立了散体在振动场作用下剪切试验的几个力学模型。
Based on a large number of dynamic shear tests, several mechanical models of dynamic shear test of bulk materials have been established in this paper.
最后给出了表面强化弹簧的剪切疲劳模型。
Finally the shearing fatigue model of the surface strengthening spring is suggested.
修正后的计算模型考虑了土壤受剪速度对其剪切应力的影响。
The effect of shear rate on shear stress is included in the revised model.
比较了考虑横向剪切变形的几种力学模型，提出了一种新的假定剪应力沿板厚呈抛物线分布的分层模型。
This paper compared several mechanical models with transverse shear deformation and put forward a kind of layer model assuming that shear stresses vary parabolically through the plate thickness.
本文给出一个计算单向纤维增强复合材料纵向剪切模量的模型。
A model is proposed for predicting the effective longitudinal shear modulus of fiber reinforced composite materials.
这个模型除考虑竖杆的弯曲和剪切变形外，还考虑了轴向变形。
In this model, besides considering bending and shear deformation, the axial deformation of columns has also been taken into account.
利用新的含微孔材料模型对塑性材料局部剪切失稳进行了分析。
By means of a new void - containing material model, analysis of shear localization for plastic materials is carried out.
以生产数据为学习样本，建立BP神经网络模型，实现对剪切旋压工艺参数的预测。
BP neutral networks model has been established in order to predict process parameter of shear spinning based on many data accumulated during manufacturing.
根据新的斜角非自由切削模型，本文提出了新的剪切面积计算方法。
The paper proposes a new method for calculating shear plane area based upon a new oblique cutting model with double edge.
计算中的底部剪切应力由波流边界层模型给出波—流共同作用下的形式。
In calculation, the bottom shear stress under the effect of waves and currents is supplied by the wave-current bottom boundary layer model.
弹性-粘塑性模型对反平面剪切扩展裂纹尖端的应力应变场进行了分析。
An elastic viscoplastic model is used to analyse stress and strain fields at the tip of a propagating crack under antiplane shear.
并通过一个大型三轴剪切试验的算例，说明了该模型的合理性。
An example of large scale triaxial test was taken to prove the rationality of the present model.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
本文对剪切干涉灵敏度进行定量讨论，首次提出平均灵敏度数学模型，它圆满地解释了剪切干涉特性。
The sensitivity of lateral shear interference is quantitatively discussed and the model of average sensitivity is presented, it can explain the theory of lateral shear interference completely.
计算海底剪切应力时应用波流共同作用模型，而不是纯波浪和纯水流两种情况下的剪切应力的叠加。
The combined wave-current models are applied to the calculation of bed shear stress instead of the simple addition of wave and current.
基于剪切筒模型和常用疲劳加载方式，首先建立了循环荷载作用下钢筋与混凝土界面脱粘应力的计算模型；
Based on the shear-lag model and the usual loading way, the computation model of interfacial debonding stress under tension-tension cyclic loading is established first.
基于剪切筒模型和常用疲劳加载方式，首先建立了循环荷载作用下钢筋与混凝土界面脱粘应力的计算模型；
Based on the shear-lag model and the usual loading way, the computation model of interfacial debonding stress under tension-tension cyclic loading is established first.
应用推荐