同时进一步提出了钢管的无变形剪切方法—双向切割法。
Meanwhile, a non deformable, double directional cutting method for shearing tube was pointed out.
实现上述操作的简单方法是剪切并粘贴表单中的所有字段。
A simple way to do this approach is to cut and paste all the fields in the form.
替代方法是剪切并粘贴生成的计划并将其作为应用程序归档文件的一部分部署。
The alternative is to cut and paste the generated plan and deploy it as part of the application archive.
模式并不是您仅仅只需要剪切和粘贴的具体解决方法，而是一个您如何解决问题的方法。
The pattern isn't a concrete solution that you simply cut and paste, but it is an approach to how you might solve the problem.
给出了将该方法用于实际剪切干涉图数据处理的结果。
The results are given by applying the method to processing a practical shearing interferogram.
介绍了稳态强度理论的基本概念、稳态强度的固结不排水剪切试验方法及试验结果；
The steady state strength concepts, the consolidated-undrained triaxial shear test method and the test results are introduced.
提取打印标题的代码非常简单，仅仅就是剪切，粘贴，加入对新方法的调用。
It is easy to extract the code that prints the banner. I just cut, paste, and put in a call.
在常规横向剪切干涉仪的基础上，利用波前周期延拓的假设，基于小波变换的方法实现了波前重构。
On the assumption of wavefront prolongation, a new optical phase retrieval algorithm by conventional lateral shear interferometer with wavelet transform is introduced.
这种方法是利用激光光栅剪切干涉仪和塔宝效应实现的。
This method is realized by using laser grating shearing interferometer and Talbot effect.
术中根据钛网结构和所需长度进行设计，采用四种不同的方法进行剪切。
The titanium meshes were cut by four different ways by the design related with the length and titanium structure.
精密剪切是重要的下料方法。
在试验研究的基础上，采用数值模拟方法研究了蒙皮单元的剪切性能。
Based on test, numerical modeling method is adopted to simulate the shear behavior of the basic panel.
结合南阳地区膨胀土的抗剪强度研究，对其现场剪切试验的试样制备及试验方法进行探讨，提出了膨胀土抗剪强度的修改计算公式。
Taking the expensive soil in Nanyang Area, Henan Province, as study case, the in-situ shear test method, including preparing samples and test method, is proposed in the paper.
传质速率及壁面剪切应力的测量采用电化学方法。
Mass transfer rates and wall shear stresses are measured by the electrochemical method.
应用本文的方法对剪切模型框架结构上安装的锚索控制器进行了控制器的总体优化设计。
The global optimal design for the control system of frame shear structure with tendon control devices installed on the structure is conducted for the control systems.
讨论了VME型真空制膏机的使用适应性及该设备搅拌器溶解盘剪切方式的选择方法。
This paper discussed the adaptation of VME machine and the seleted method, sachas shearing and cutting mode of the solution salver on its mixer.
ECAP是实现材料纯剪切变形的有效方法。
ECAP is an effective method realizing pure shear deformation.
在此基础上，进一步提出了一种用于预测角焊缝角变形的线弹性简化方法，即剪切固有应变法。
Furthermore, a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion.
提出一种测量物体固有频率的新方法———旋转剪切频闪散斑干涉法。
A new experimental method for measuring resonant frequencies of objects is proposed by use of rotating shearing stroboscopic speckle interferometry.
根据计算的应变结果，提出了一种定义剪切区形状的方法。
A new method is therefore proposed defining the shape of shear zone in accordance to the results of strain.
根据新的斜角非自由切削模型，本文提出了新的剪切面积计算方法。
The paper proposes a new method for calculating shear plane area based upon a new oblique cutting model with double edge.
介绍了一种高强度光敏胶拉伸剪切强度测试方法，分析了影响测试结果的几种主要因素。
An introduction to the testing method for tensile and shear strength of high strength photosensitive glue is given and the main causes that have influence on the testing result is analyzed.
研究了辊道、秤体升降以及方坯剪切的控制方法，给出了方坯在线称重的控制方案。
Working out the control methods of conveying, moving up and down of weighing equipment and billet cutting, the control solution of online weighing of billets is proposed.
介绍了板材连续剪切变形方法的基本原理及特点。
The basic principle and characteristic of continuous confined strip shearing were introduced.
为了进行强度分析，文中在剪切力的获取上采用了模拟转换方法，从而解决了在剪切机上不能直接得到剪切力的困难。
In order to make strength analysis, analog conversion method was used to obtain the shearing force, which could not be determined on the shearing machine directly.
提出了一种基于数字照相量测和图像相关性分析技术的土体剪切带识别方法。
An effective technique of measuring the shear bands is put forward using digital photogrammetry and image correlation analysis.
通过设计ecap模具的几何结构，研究了剪切应变累积效应的度量方法。
With structural design of ECAP die, the accumulated effect of shear strains under ECAP was calculated.
在土体中进行原位抗剪试验，一般采用剪切盒的方法。
Shear box is generally used in conducting the in-situ shear experiment for soil.
本文采用四边形面积坐标，利用假设剪切应变场方法和广义协调理论构造出一个具有12个自由度的四边形厚薄板通用弯曲单元TACQ。
In this paper, a new quadrilateral thin-thick plate bending element with only 12 degrees of freedom, TACQ, is developed by using the area coordinate method.
介绍了剪切干涉仪适时定量处理的方法。
The quantitative process of shearing interference are introduced.
应用推荐