产品为非脆性材质,韧性好,耐压强度高、平整度好、尺寸规整、机械加工性能优良且施工方便可任意剪切弯曲。
Products for non-brittle material, toughness, high strength, good flatness, size regular, machining performance and the construction can be cut to facilitate bending.
它包括的操作有对比度增强、剪切、缩放、几何弯曲和频率范围处理。
It includes such operations as contrast enhancement, cropping, scaling, geometric warping, and frequency domain processing.
的的两个衡量,弯曲和剪切,然后它是附在皮瓣非洲之角。
The pushrod is measured, bent and cut, then it is attached to the flap horn.
总框架具有剪切结构的变形特征,总支撑则具有弯曲悬臂杆的变形特征。
The master frame is characteristic of shear structure deformation and the master support features bending cantilever bar deformation.
剪切带两侧的纹理在形状、粗细、延伸方向和弯曲类型上均表现为明显的不一致。
The shape, thickness, stretch direction and bend type of the texture on both sides of the shear belt were observably different.
提出了考虑剪切变形时变截面梁弯曲和稳定计算的传递矩阵法。
The transfer matrix method for the bending and stability of the variable section beams with shear deformation is presented.
在实际工程中,钢筋混凝土连续梁发生弯曲裂缝或剪切裂缝之后,支座反力将重新分配。
The support reaction will be reallocated after the appearance of bend and shear crack of a reinforced concrete continuous beam in the practice project.
将梁的弹性大挠度弯曲理论应用于蜂窝壁板,研究了大变形条件下蜂窝材料的非线性剪切变形行为。
Basing on the elastic bending theory of beams in large deflection, the non-linear shearing behavior of cellular materials under large deformation is studied in the paper.
对于弯曲成形,采用普通有限元方法会有剪切自锁现象,需要划分大量的单元。
For the bending forming problems, more ordinary finite elements need to be adopted because of shear locking phenomena.
采用复级数方法首次建立了基于一阶剪切变形理论的各向异性矩形板横向弯曲一般解析解。
General analytic solutions for transverse bending of anisotropic rectangular plate using first order shear deformation theory is obtained at the first time by the complex series method (CSM).
这个模型除考虑竖杆的弯曲和剪切变形外,还考虑了轴向变形。
In this model, besides considering bending and shear deformation, the axial deformation of columns has also been taken into account.
由实测和理论分析表明复合土钉墙的变形是由剪切变形、弯曲变形以及墙底基底以下土体变形组成。
The analysis and the spot measure data prove the deformation of composite soil nailed wall include shear deformation, bend deformation and total deformation of soil.
提出一种考虑剪切变形影响时,求解梁的弯曲变形和横向自由振动的奇异函数解法。
An approach using singular functions is propsed to solve the bending deformation and the transverse free vibration problems of beams in consideration of shearing.
用该方法实测了造船工业用的单向竹蔑积成胶合板的弯曲刚度与横向剪切刚度。
Followly, the bending rigidity and transverse shearing rigidity of one-way bamboo-stripe laminates applied to shipbuilding has been measured practically with this method.
经典的梁板弯曲理论由于未考虑横向剪切变形的影响而只能适用于细长梁和薄板。
Classical bending theory of beam and plate can only be fit for thin and long beam and thin due to without considering deformed influence of cross shearing.
结果表明:在跨高比较小时,横向剪切效应对板的弯曲性能有显著影响;
The results indicated that transverse shear effect affects greatly on the bending properties of the plank while the ratio of span-height was small.
提出了考虑剪切变形时深梁弯曲问题的初参数法。
In this paper, initial parameters method for the bending problem of thick beam with shear deformation is presented.
片岩斜坡中弯曲倾倒变形是通过密集的片理上逐层剪切位移实现的。
The bending and toppling deformation in slopes of mica quartz schist occurs due to shear displacement slice by slice of schist with concentrated schistosities.
对燃烧臂底座进行了弯曲强度、剪切强度及抗挤压强度的校核。
And finally, the strength of bending, shearing and extruding is checked.
结果随着碳纤维含量的增加,根管桩的弯曲强度和剪切强度均逐渐增加。
Results the transverse strength and shear strength were increased with the increase of the carbon fiber content.
我们还讨论了裂缝系统与弯曲,断层和剪切带之间的关系。
We have also discussed the relationships between these fracture systems with curvature, faults and shear zones.
在对贮液圆柱壳进行动水压力计算时常常仅仅采用整体弯曲和整体剪切两种计算模型。
The bending and shearing model in beam mode arc usually used for computation of dynamic water pressure for cylindrical storage tank.
结合工程实例,将建筑物的沉降裂缝分为弯曲型、剪切型和混合型裂缝。
In an example of engineering, sedimentation cracks in building are divided into bending type?
作为实例,给出渤海25、50、100年重现期的平整冰层设计厚度分布、压缩强度分布、弯曲强度分布、剪切强度分布和弹性模量分布。
As samples, the distributions of ice sheet design thickness, compressive strength, flexural strength, shear strength and elastic modulus for ice periods of 25, 50 and 100 years are presented.
本文采用四边形面积坐标,利用假设剪切应变场方法和广义协调理论构造出一个具有12个自由度的四边形厚薄板通用弯曲单元TACQ。
In this paper, a new quadrilateral thin-thick plate bending element with only 12 degrees of freedom, TACQ, is developed by using the area coordinate method.
本文介绍纺织结构复合材料在剪切、压缩、拉伸和弯曲情况下的破坏机理,分析其特点和存在的问题,提出了发展趋向。
This paper describes the failure mechanisms based on shear, compression, tension and flexure, analyzes characteristics and problems of those models and then discusses the future trend.
结合工程实例,将建筑物的沉降裂缝分为弯曲型、剪切型和混合型裂缝。
In an example of engineering, sedimentation cracks in building are divided into bending type? Shear type and combination type.
初步研究了织物伸出长度、弯曲刚度、剪切刚度对静态悬垂系数的影响。
Furthermore, the relation of fabric drapability and stretching-length, flexual modulus and shearing modulus is also discussed.
因而要尽量控制砌体的破坏形态为弯曲破坏而非剪切破坏。
Therefore, it's best to control masonry structure have bend failure but not shear failure.
根据夹层板的正应力、正应变和剪应力、剪应变沿板厚的分布关系,得到夹层板的弯曲、剪切修正系数。
The bending and shear modifying coefficients are derived according to the distribution of the stress and strain of the sandwich plate along the direction of the plate thickness.
应用推荐