结果表明，影响最大的因素是工作压力，这给加氢精制反应器的制造和检验提供了参考。
The results show that the working stress is the most influencing factors. It provides a reference for the manufacture of the hydrogenation refined reactor.
文中介绍的方法实用性很强，在工程上对电机的线圈设计、制造和检验有着重要的指导作用。
The method in this paper is very practical and can play a guiding role in design, manufacturing and test of the coils of motor in the engineering.
我们承诺我们公司的所有产品均按相应的国家或国际标准以及有关的法律法规的要求进行设计、制造和检验，保证符合相关的质量要求。
We assure that the statements in this certificate are correct and that the design manufacture and test are in accordance with the relevant specification quality requirement.
只有当该机构检验了药物测试的数据并认为它具有良好的治疗效果而没有严重的副作用，这种药物才被允许制造和销售。
Only once this authority has reviewed the data on the drug and agreed that it offers therapeutic benefit without serious side effects is the drug approved for manufacture and sale.
因此，电控喷油器检测系统是各汽车制造商和修理厂研制、生产、检验、调整喷油器不可缺少的设备。
So the electronic controlled test system is the necessary device for the carmaker and reparative factory to test and adjust the injector.
采购或生产制造开始之前，合同专业检验试验计划(itp)应充分明确检查、无损检验(nde)和性能试验介入点。
Prior to procurement or commencement of manufacture, the inspection, NDE and performance testing intervention points shall be adequately defined in a contract specific inspection and test plan (ITP).
卖方所提供的全部设备和材料将由买方负责检验；质量合格证、检验和试验记录应由制造厂出具。
All the equipment and materials supplied the Seller shall be inspected the Buyer and the quality certificates and inspection and test records shall be issued the manufacturer.
介绍锆和锆合金的性能及在设计、制造、检验中的特点。
Introduces the performance of zirconium and its alloy and their characteristics in design, manufacture and test.
很明显，是制造厂商的技术不过关和公司的检验疏忽这两方面的原因所造成的。
It is obvious that have tow aspect, one is low technology by manufacturer, the other is too neglect in the step of Q-check by our company.
本文对大直径薄壁容器的制造、设计和检验，以及对钛衬里的防腐蚀措施加以研讨。
This paper describes the design, manufacture and inspection of large thin walled vessels. It also discusses the precautions against corrosion of titanium lined vessel.
冷弯试验是钛容器制造中对铁板和焊接接头的必保检验项目。
The bending test is the necessary inspection item of titanium plate and welding joint for the manufacture of titanium vessel.
熟悉各种机械制造工艺和检验技术。
Be familiar with different kinds of machinery manufacturing process and inspection technology.
制造部负责生产过程半成品或成品检验和试验状态的标识。
The Manufacturing Department is responsible for identifying the inspection and test status of the semi-finished products or the finished products in production process.
介绍了钛隔离套制造工艺的研制过程，成型、焊接、线能量控制、焊接实验及评定、热处理、机加工和检验。
The research work, fabricating, welding, heat-input control, welding test and evaluation, heat treatment, machining and inspection of titanium distance sleeve are presented here.
工程师有权对按合同规定供应的材料和工程设备在其制造、装配或准备过程中进行检查和检验。
The Engineer shall be entitled, during manufacture, fabrication or preparation to inspect and test the materials and Plant to be supplied under the Contract.
泵在主要零件材质、制造精度、装配精度检验和液压试验合格后，方能进行试运转。
Pump in the major parts material, manufacture, assembly precision accuracy test and hydraulic test after passing the required test run.
核查不良品报告-部署，批准和重新检验，汇报检验和制造状态。跟踪不良部署。
Review nonconformance report - disposition, approval and re-inspection. Report inspection and manufacturing status. Follow up nonconformance dispositions.
本文提出了基于逆向工程和虚拟装配技术的汽车制造质量检验和控制的新方法。
Based on reverse engineering and visual assembly, a new method is proposed to inspect and control the quality of automobile manufacturing.
文章介绍了狭缝刀片的制造工艺，狭缝的检验方法和误差分析。
In this paper, the manufacture technology of narrow crack blade, the method of crack checking and the error analysis are introduced.
台友所制造的每一台机械以国际化的质量标准装配、检验，提供高品质的产品，超值的性价比赢得了用户的赞赏和信任。
Taiyou made machinery in each of the international quality standard assembly, testing, providing high quality products, value for money has won the appreciation and trust of the user.
第三条民用核安全设备设计、制造、安装和无损检验活动适用本条例。
Article 3 The design, manufacturing, installation and nondestructive inspection of civil nuclear safety equipment shall be subject to this Regulation.
在此基础上，讨论了基于约束检验的可制造性评价内容和提出了结构工艺性评价和加工可行性评价的分层评价树；
On this basis, the content of manufacturability evaluation based on boundary checking is discussed and the layered evaluation tree of part configuration and machinability is proposed.
电连接器的设计、生产制造工艺、检验、选型、贮存和使用等环节都存在着影响质量和可靠性的因素。
There are factors that effect quality and reliability of these products in links in design, production technology, inspection, type selection, storage and application of electric connectors.
具有五年以上的锅炉、管道和压力容器设计、制造、焊接检验，无损检测或质保经验；
Minimum of 5 years experience in boiler, piping and pressure vessel designing, manufacturing, welding inspection, NDE or quality control experience ( QA/QC).
根据钛材的化学、物理、力学和工艺性能介绍了钛容器在设计、制造、检验和应用方面的特点。
Based on the chemical, physical. mechanical and processing performances of titanium material, the characteristics of design, maufacture. inspection and application of titanium vessel are recommended.
文中列出了蜗杆传动设计公式，阐述了蜗轮付制造工艺和检验、调整方法。
Besides, the manufacturing chart and adjusting method of worm wheels are also described.
2007年通过了中国特种设备检验协会的现场鉴定和评审，取得了三类(A 2级)压力容器的制造许可证。
In 2007, it passed the identification at site and assessment by the Chinese Association of special equipment test, and has acquired three categories (A2 level) pressure vessel manufacturing license.
这堂课中我们要检验案例描述的丰田美国公司营运中所采用的丰田制造系统和即时(JIT)生产。
In this class we will examine the Toyota Production System and Just-in-Time manufacturing in a case describing their operation in a Toyota plant in the us.
这堂课中我们要检验案例描述的丰田美国公司营运中所采用的丰田制造系统和即时(JIT)生产。
In this class we will examine the Toyota Production System and Just-in-Time manufacturing in a case describing their operation in a Toyota plant in the us.
应用推荐