同时，对不同制膜方法进行研究。
At the same time, the research of the different deposition methods is presented.
制膜时所用的溶剂不同会影响所成膜的性质。
Solvent used in making membrane influences the performance of the membrane.
对分散剂和制膜工艺对共混膜性能的影响作了分析。
The effect of dispersant and preparation technique on performance of composite membranes was analyzed.
由一个同中心的半圆聚合物放置在金制膜层上构成的。
It consists of concentric semicircles of a polymer laid down on a gold film.
调节有关制膜工艺参数即可获得特定用途的超滤分离膜。
The PAN-SS membrane for different usage can be acquired by changing related process parameter.
研究了羟丙基醋酸纤维素反渗透膜的制膜工艺和膜性能。
The casting process and reverse osmosis (RO) properties of hydroxy-propyl cellulose acetate (HPCA) membrane were studied.
稳定的制膜液是制备出完整、无缺陷溶胶膜的首要条件。
Suspension stability is the primary factor to prepare integrated membrane without defect.
研究了羟丙基醋酸纤维素反渗透膜的制膜工艺和膜性能。
The casting process and reverse osmosis (ro) properties of hydroxypropyl cellulose acetate (HPCA) membrane have been studied in this work.
该膜致密，有很好的空气稳定性，制膜工艺重复性极好。
The film gave a high density and good stability in the atom-sphere, especially the polymerizing technology process could be repeated very well.
锂电池生产专用制膜机是锂电池生产中所需的一个重要设备。
The membrane machine for lithium battery is the important equipment in lithium battery production.
本文对钛醋酸纤维素反渗透膜制膜工艺和膜性能进行了研宄。
The casting process and reverse osmosis (RO) properties of Titanium cellulose acetate (TiCA) membrane have been studied.
制膜液温度升高，得到微孔膜的孔隙率、通量及平均孔径都增大。
Rising temperature of casting solution will increase the water flux, porosity and average pore size of PVDF membrane.
讨论了制膜液中吸水树脂含量、粒度，以及添加剂与膜性能的关系。
The effect of ARW content, size and additives on the performance of membrane were discussed.
脉冲激光薄膜沉积（PLD）是近年来受到普遍关注的制膜新技术。
The pulsed laser deposition (PLD) is a new promising technique for the growth of thin films attended generally by people recently.
通过试验确定了多糖类可食包装膜实验室制膜的最佳工艺及其参数。
The main results indicated:1 Through repeated experiments, the best technology and referance data of laboratory manufacture on polysaccharide edible packaging film was confirmed.
研究了制膜工艺对膜形貌的影响、锂盐的种类对电池性能的影响等。
Study of the membrane morphology of the film, the type of lithium battery performance, and so on.
讨论了共聚物组成、制膜液中聚合物含量、添加剂等与膜平均孔径的关系；
The effect of composition of copolymer, polymer content of casting solution, additives et al on the performance of membrane were discussed.
本文研究了制膜条件对PVDF/聚酯无纺布复合微孔膜结构与性能的影响。
The influences of preparing conditions on the structure and performances of composite membranes by casting PVDF solutions on PET non-woven fabrics were investigated.
第二章：研究了金属银原子薄膜的制备方法，阐述了热蒸发制膜的相关理论。
In chapter II, we study on the preparation method of the Ag film and describe the theory of the thermal evaporation method.
研究了在不同制膜液浓度及不同浸渍次数的条件下，葡萄糖传感器的响应性能。
Under the conditions of different polyurethane concentration and dip times, responses of glucose sensors were studied.
我们还利用自行设计的一套制膜工具，为本BAC文库制备了中密度菌落杂交膜。
We have also prepared middle —density hybridization filters for this BAC library using a tool designed by ourselves .
以马铃薯淀粉为主要原料，通过制膜机制成了具有一定机械强度的可食性淀粉膜。
The edible starch films with some intensity is made of potato starch by film machine.
研究了PEG分子量、交联剂用量、制膜溶剂及预聚体溶液中水含量对膜透湿性的影响。
The effects of molecular weigh (Mn) of PEG, the usage of cross link agents, solvents and water in the solution on the moisture permeation of PU membrane have been studied.
从而为克服传统PLD制膜技术上的制膜厚度的不均匀及大颗粒粒子的产生从理论上提供了依据。
This provides a theoretical basis to partly overcome the deficiency of traditional PLD technology about the nonuniform of thin film and the production of granule or droplets on thin film.
膜分离是工业上能耗最低的一种分离过程，选择合适的膜材料和制膜工艺，一直是分离膜研究的核心。
Membrane separation is the lowest energy consumption separation, choosing the suitable membrane material and making technology is the key of separation membrane study.
研究了PVB本体浓度、制膜间隙、凝胶浴温度以及乙酸添加剂等因素对PVB不对称超滤膜性能的影响；
Effects of concentration of PVB, clearance of scraper, temperature of gelling bath and concentration of acetic acid additive on membrane performance were investigated.
全面综述了近几年气体分离膜研究的最新进展，主要包括气体分离膜材料、制膜方法、表征方法三个方面。
This review is focused on the recent progress in the researches and developments of the gas separation membranes including membrane materials, preparation methods and characteristics.
全面综述了近几年气体分离膜研究的最新进展，主要包括气体分离膜材料、制膜方法、表征方法三个方面。
This review is focused on the recent progress in the researches and developments of the gas separation membranes including membrane materials, preparation methods and characteristics.
应用推荐