该方法可有效降低分子筛制备成本、减少污水排放。
The said method can reduce the preparation cost of molecular sieve effectively and reduce the amount of drained sewage.
制备成本低廉，每公斤成本238.5元，具有较强的应用价值。
The preparation cost is inexpensive, production cost per kilogram is 238.5 yuan, it has the stronger application value.
但是这些方法由于制备成本高，或者不适合大规模制备电解质膜而在应用上受到限制。
Some of the technologies are not suitable for preparing the electrolyte films on a large scale or the costs are expensive, that limit application in the SOFCs.
本发明解决了采用金属作为导电填料的导电胶制备成本高、老化试验后体积电阻变化大的问题。
The invention solves the problems of the conductive adhesive with metal as the conductive filler, such as high preparation cost and large change of volume resistance after an aging test.
阿尔泰克计量设备有限公司就两箱摆式加药装置和三箱加药装置在降低溶液制备成本可能性方面进行了研究。
Study by Alltech Dosieranlagen GmbH to exhaust the cost-reducing potentials when using two-chamber pendulum type plants in comparison with the three-chamber preparation plants.
利用钢铁厂平炉尘制备中温变换催化剂，制备成本低，工艺简单，活性达到部颁标准，具有明显的经济效益。
With the action of some bivalent cation, high temperature shift catalyst has been prepared by mixture precipitation method using open-hearth dust as a raw material.
根据正交试验，通过收率、比表面积及透射电镜表征分析得到了最佳纯化条件，以保证产品质量，降低制备成本。
Choice the best condition though the orthogonal experiments and analyzed of purification rate, BET data and TEM image. The quality was ensured and the cost of production was decreased.
本发明方法与传统合成相比，原料来源方便，反应步骤简短，糖苷化反应的催化剂廉价易得，使制备成本明显下降。
Compared with traditional synthesis process, the present invention has the advantages of wide material source, less reaction steps and low preparation cost.
方法应该迅速(在数分钟或数小时内可以得到结果)，样品制备需要量最低，和较低成本。
Methods should be fast (giving results in minutes or hours), require minimal sample preparation before analysis, and be low in cost.
它们的进展主要是关于如何低成本地设计和制备这些精细结构的。
Their advancements have been about how to design and fabricate that intricate structure cheaply.
CVB3疫苗虽然可以抑制小鼠的CVB3心肌炎，但制备时需要大量的病毒抗原，成本过高，难以推广及大量使用。
Though CVB3 vaccine can inhibit CVB3B3myocarditis, but it needs mass viral antigen while preparing, so the cost is too high to popularize and use in a large amount.
热化学反应法制备金属基陶瓷涂层具有工艺简单、成本低廉、涂层与金属表面结合力特强等优点。
Preparation of metallic ceramic coatings by thermochemical reaction method has the advantages of simple process, low cost, very strong adhesion of coatings to metal surface.
竹子具有可再生，低成本的优势，不过到现在为止，还没有竹浆粕用于制备醋酸纤维素的报道。
Bamboo has the advantages of low cost and regeneration, but there is no report about bamboo pulps used in CA preparation.
虽然梯度功能材料的制备方法很多，但效率较高、成本较低、操作较简单的方法是离心铸造法。
Although there are a lot of the fabricating techniques of functionally gradient material (FGM), the centrifugal casting method is more effective, cheaper and easier to operate.
此工艺制备的胶粘剂成本低、流动性好、粘度稳定、干燥快。
The adhesive prepared with this process has low cost and good fluidity and stable viscosity and high drying speed.
以硫铁矿烧渣为原料，采用机械活化硫铁矿还原法制备绿矾具有成本低、反应快、产品质量高等优点。
Copperas prepared by a reduction method of mechanically activated pyrite from pyrite cinder is featured by low cost, fast reaction speed and high quality.
本文旨在制备低成本且力学性能和热性能俱佳的可生物降解脂肪族嵌段共聚物。
This paper aims at preparing biodegradable aliphatic block copolymers with combined mechanical and thermal properties with reduced cost.
第二部分为CIS薄膜的低成本非真空法制备。
The second part is the CIS thin films prepared by low-cost non-vacuum methods.
结果与结论本制备工艺操作简便，收率高，成本低，易于工业化生产。
Results and Conclusion This preparation method was simple, yield was high and the cost was low. It is suitable for industrial production.
主要研究内容和结果如下：研究了环氧树脂与金属均匀混合粉末作为sls成型材料，这种粉末有制备简单，成本低，成型性好的优点。
The main research contents and results are as follows: Epoxy resin and metal powder are averagely mixed as SLS material which is very easy to produce with low cost and good forming property.
该工作对于V2O5光电薄膜的大面积、低成本制备具有一定的参考价值。
This work will do benefit for the fabrication of optoelectronic V2O5 thin films with large area and low cost.
为满足特种纳米粉高比表面积和高纯度的性能指标制备要求，降低成本和实现大量生产提供了一种较为可行的技术方法。
This technique is feasible to reduce production costs and step up production in order to meet the high performance needs of ratio superficial area and purity.
展望了用含氢钛合金粉末成形工艺制备高性能、低成本钛合金制件的前景。
The future of the ti alloy parts with high properties and low cost by ti alloy powder with hydrogen was reviewed.
电化学沉积薄膜技术工艺设备简单成本低，在半导体薄膜制备方面有很好的应用前景。
Electrochemical deposition is of simple and low cost method, displaying a potential application in the deposition of semiconductor films.
本制备技术生产晶须的成本较低，具有广阔的应用前景。
Being its low cost, calcium carbonate whiskers will be widely used as fillers.
制备出发光强度高、成本低、加工性能优良的稀土高分子发光材料有助于解决这些问题。
The manufacture of the rare earth polymer luminescence materials with high luminescence intensity, low cost and good process property will be helpful to solve these problems.
螯合纤维素制备工艺简单，性能优越，成本低廉。
Chelating cellulose is of simple preparation, excellent nature and low cost.
为开发耐热、耐磨、成本较低、制备较为简便的新型低密度金属基复合材料提供了理论和实验基础。
It provided theoretical and practical bases for the development of new low cost low density heat resisting and wear resisting metal based composite by simple and convenient fabrication.
干法制备具有生产成本低，产品性能优良，对环境无污染等优点。
Dry preparation has many advantages such as low cost, excellent product property, no pollution to environment, etc.
干法制备具有生产成本低，产品性能优良，对环境无污染等优点。
Dry preparation has many advantages such as low cost, excellent product property, no pollution to environment, etc.
应用推荐