探索旋涂法制备工艺参数对薄膜结构的影响。
The influence of processing parameters in spin-coating was explored.
着重于初生晶种制备工艺参数的试验研究和二次晶种存在的探讨；
The technological parameters for making first crystal seeds and the influence of existence of secondary seeds have been studied.
通过优化钛酸钾晶须制备工艺参数，在钛合金表面原位合成了钛酸钟表面功能涂层。
By optimized the processing technique of potassium titanate, the author in situ synthesized potassium titanate coating on the surface of titanium alloy.
通过采用不同的电极结构、通过改变制膜方法、薄膜厚度、退火温度等结构和工艺参数，研究制备工艺参数对光阳极结构和电池性能的影响。
Through adopt different electrode structure, different film making method, different annealing temperature etc, the dependence of parameters on properties of the battery was studied.
本文采用离子凝胶化法以及喷雾干燥技术，以壳聚糖和三聚磷酸钠为载体，制备出装载牛肉香精的壳聚糖-三聚磷酸钠纳米微囊并确定了其最佳制备工艺参数。
On the base of using chitosan and tripolyphosphate as the carriers, the preparation of beef flavor - loaded nanocapsules was studied by adopting ionic gelation method and spray - drying technology.
采用超音速电弧喷涂设备在不同工艺参数条件下制备JCW - S - AM涂层，利用显微硬度计测定各种涂层的显微硬度。
The microhardness of JCW-S-AM coatings prepared by high velocity electric arc spraying on conditions of different process parameters was tested by hardometer.
本实验旨在探讨制备品质较好的焦糖色素的工艺参数。
This experiment is aim at discussing the preparation craft parameters of good quality caramel.
该文对仙人掌汁的制备，仙人掌汁的添加量、添加方法和时间等工艺参数的优化设计，及纯生啤酒酿造进行了探讨。
This paper discussed the cactus juice preparation and draft beer brewing method, and optimized the juice addition amount, time and method, and other processing parameters.
通过试验确定了制备不同取代度甲基淀粉的工艺路线和参数。
Through experiments, finds processing route and parameters of preparing different ds methyl starch.
介绍金属闪光浆的制备以及生产该帆布的工艺流程、基本配方、主要技术参数等。
Preparation of metal flash paste and technological process, fundamental formula and main technical parameter for the canvas are introduced.
研究了碳化硅颗粒增强铝基复合材料的制备，并对影响复合材料性能的一些工艺参数进行了摸索和探讨。
The preparation of SiC particulate reinforced al matrix composite is studied. The influence of technological parameter on the composite mechanical property is analysed.
本文结合黑龙江省科技厅的攻关项目，建立球磨法制备超细石英粉体的工艺参数模型并进行优化。
This article is based on the item of science and technology office of heilongjiang province, and a process parameters model is built and optimized.
通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。
One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.
文中简要介绍了高灰煤泥浆制备的试验研究、工艺设计、技术参数等。
The paper presents a brief description of the experimental study of slurry preparation, system design and parameters involved.
方法：采用液中固化法制备果胶钙骨架型小丸并优化其工艺参数，以紫外分光光度法测定其体外释放度。
METHODS Rutin calcium pectinate pellets were prepared by in-liquid solidifying method, the best parameters were chosen and its release properties in different media was evaluated.
液淬工艺参数的合理配合下获得的足够高的液淬速率是得到非晶结构的关键，也是制备质量条带的决定因素。
High quenching rate which can be obtained by the rational combination of quenching parameters mentioned above is the key to gain noncrystalline structure and high quality amorphous strips.
采用复合法制备型壳，在制备过程中，改变不同的环境湿度和温度而得到型壳的不同干燥时间曲线，确定工艺参数优化值。
Using mold prepared by compound method, on the basis of different drying time curve attained by changing environmental humidity and temperature, the optimized processing parameters were determined.
而且通过调节工艺参数，可制备出沿不同晶向择优生长的多晶金刚石薄膜。
Moreover, by adjusting the technological parameters, polycrystalline diamond films grown preferentially along the different crystal orientations can be prepared.
介绍以粗硫酸镍制备电池工业用精制硫酸镍和电镀级硫酸镍的生产工艺和技术参数。
The production process and technical parameters of making high quality refined nickel sulphate for cell industry & electroplate industry by using rough nickel sulphate as raw materials are described.
把该程序用于合成莫来石工艺参数的设计，进而制备出了性能达到预期指标的莫来石材料。
Processing parameters were designed by means of the program, by which the synthetic mullite with expected mechanical properties was prepared successfully.
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
研究了酚醛泡沫制备工艺中一些参数条件对泡沫体性能的影响。
The influence of processing conditions on the property of phenolic foam was studied.
实验表明，采用合适的工艺参数能制备出具有钙钛矿型结构的PZT铁电薄膜。
The experiments show that the PZT ferroelectric thin film with pe-roskite structure can be produced using reasonable process parameters.
结果表明，通过采取合理的制备方法和工艺参数，可以有效地使所制备材料的孔隙率降低到1%，提高材料的复合质量。
The results show that the porosity can be significantly reduced up to 1% with correct stirring method and processing technology, and so the quality of the composites can be much improved.
对影响花生蛋白水解制备花生多肽的各种影响因素，如酶制剂的筛选，酶解工艺参数等进行了系统地研究。
Many factors that affect the preparation of peanut peptides such as the selection of enzymes and the hydrolysis parameters of protease were studied.
介绍了泡沫金属电极的制备方法，对其中渗流铸造法的原理及工艺参数作了详细讨论。
Methods of making porous foamed metallic electrode are presented in this paper. The mechanism and technological parameters of penetration casting are elucidated in detail.
采用正交试验方法对影响仿生溶液法制备生物活性层特性的工艺参数进行了优化设计。
The orthogonal test was adopted to optimize the process parameters, which affect the characters of the bioactive layer formulated by the simulated body fluid method.
首先，对MEA的制备及优化研究，主要从热压工艺参数、催化层组分优化、扩散层和质子交换膜的选择等方面考虑的。
First, Fabrication and optimization of MEA are studied in many aspects, for example hot press parameters, components of catalyst layer and diffusion layer, PEM thickness, etc.
首先，对MEA的制备及优化研究，主要从热压工艺参数、催化层组分优化、扩散层和质子交换膜的选择等方面考虑的。
First, Fabrication and optimization of MEA are studied in many aspects, for example hot press parameters, components of catalyst layer and diffusion layer, PEM thickness, etc.
应用推荐