模拟结果表明，利用数值模拟方法可以改进退火窑的设计和操作。
The mathematieal simulation can be improved the design and operation of lehr.
方法利用数值模拟方法，对水平井注蒸汽的开发、布井方式等进行研究。
Method Steam injection development and well pattern of horizontal Wells were studied by using numerical simulation.
利用数值模拟方法计算了双水套中水的流场分布，确定了关键的设计参数。
Calculates the distribution of inside water flows with numerical simulation, determines the key design parameters.
利用数值模拟方法研究了罐底土壤电阻率沿垂直方向变化对电位分布的影响。
The effect of soil resistivity change along vertical direction on potential distribution was studied through numerical simulation.
利用数值模拟方法对蒸汽驱中注汽速度、采注比和蒸汽干度等工艺参数进行了研究。
Through numerical modelling, this paper studies the process parameters of steam drive such as steam injection rate, production injection ratio, and steam quality.
利用数值模拟方法，研究了不同重力下有限空间内薄燃料表面逆风传播火焰的相似性。
The comparability of opposed-flow flame spread over thin solid fuels in finite spaces in different gravities was numerically simulated.
利用数值模拟方法讨论了发射系统遮拦比对均强聚焦光束湍流大气传输光斑扩展的影响。
In this paper, numerical method was used to quantitatively calculate the limited uniform-intensity focused beam spreading induced by atmospheric turbulence.
利用数值模拟方法，研究了单个建筑物外存在点污染源时室外空气污染对室内空气质量的影响。
The impact of outdoor air pollution on the indoor air quality by the way of numerical simulation was studied.
利用数值模拟方法对采用高超音速低温喷管（HYLTE）线性阵列DF化学激光器进行了研究。
The DF chemical laser, adopting the Hypersonic-Low Temperature(HYLTE) nozzle in linear array form, was numerically studied.
利用数值模拟方法研究了土中装药不同埋设深度爆炸能量分布问题，通过试验得到了耦合系数数据。
The energy distribution for ground shock of explosion with different buried depths in soil is studied with numerical simulation method, and the coupling coefficient data is gained from test.
利用数值模拟方法，研究了不同能量的底水油藏对应的合理射开程度以及在该射开程度下的开发指标。
The rational perforation degree and the corresponding development index of the reservoir with different energy were studied by numerical simulation.
利用数值模拟方法，可以明确整个成形过程的全部细节问题，为工艺设计和模具优化提供强有力的支持。
Full detail knowledge during forming process can be given by using numerical simulation, which could support for process design and dies optimization.
本文利用数值模拟方法对不同的侧除霜出风口的除霜性能进行对比研究，从中选出合适的方案新车使用。
This paper studies defrosting performance with different side defrosting outlet and to select one type for new car.
利用数值模拟方法研究了加速场强、注入相位、束团大小、形状、电荷等因素对束流横向发射度产生的影响。
The effect of field strength, initial phase, bunch shape and charge on electron beam transverse emittance is also explored by numeric simulation method.
另外，利用数值模拟方法还进行了工艺参数对熔池形态影响的研究，结果表明，对接间隙促进了熔池纵横向宽度的椭圆化。
The influence of the welding parameters on molten pool were studied by numerical simulation. The results showed the gap enhance the molten pool being ellipse.
基于随机过程理论和数值模拟方法，提出了利用MATL AB软件模拟生成随机风荷的一种新途径。
Based on the theory of random process and method of numerical simulation, a new methodology of generating random wind forces by MATLAB software is developed.
本文利用有限元数值模拟方法对影响板料胀形性能的参数进行了研究，并得出了各参数对板料胀形性能影响程度的规律。
The parameters affecting the bulging of the sheet have been studied by finite element numerical simulation method with the law of the parameters affecting the bulging obtained.
数值模拟表明，利用该方法重构的曲线能够较好地逼近真实曲线。
Numerical simulation indicates that there is an extremely good agreement between the new fitted curve and the real curve.
利用数值模拟的方法研究了电流调制下偏置电流和调制频率对垂直腔面发射半导体激光器(VCSEL)混沌动力学特性的影响。
The influence of bias current and modulation frequency on chaos dynamics of vertical-cavity surface-emitting laser (VCSEL) subject to direct current modulation is investigated by numerical simulation.
在精细油藏描述的基础上，利用油藏数值模拟技术研究剩余油分布规律是较为直观的好方法。
Reservoir numerical simulation is a fairly direct and effective way to study remaining oil distribution regularity on the basis of fine reservoir description.
利用特征线方法数值模拟了双圆弧和抛物线两种特型喷管中的三维非对称定常等熵的超音速流场。
Numerical simulation of three-dimensional, steady, isentropic, non-symmetrical flow in rocket nozzles is completed using a bicharacteristic method.
经实验校模后利用自模化原理将数值模拟方法推广到实物装置上去。
After experimental tests the self simulation principle was used to develop the numerical simulation method to physical device.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
利用数值方法模拟了高频微型同轴脉冲管制冷机内部气流交变流动和换热过程。
A numerical model for simulating the oscillating flow characteristics in a high frequency miniature pulse tube refrigerator was developed.
通过将离散相模型引入到矿井火灾数值模拟过程，提出了利用火烟中固体粒子的CFD数值模拟结果控制虚拟世界中火烟运动的方法。
The method, which the CFD numerical results of solid particles in mine fire were utilized to control the movement of flame and smoke in Virtual Environment, was put forward.
国外利用风洞模型试验和流场数值模拟计算的方法，对此问题进行了系列化的研究。
The foreign countries have utilized the methods of wind tunnel test and numerical flow simulation, and carried out the series research on this problem.
利用防护热箱法和数值模拟方法得到了砌块热绝缘系数最大时的砌块的结构。
The parameter of the block is gained when its thermal resistance value is maximum by the guarded hot box and the numerical simulation.
利用防护热箱法和数值模拟方法得到了砌块热绝缘系数最大时的砌块的结构。
The parameter of the block is gained when its thermal resistance value is maximum by the guarded hot box and the numerical simulation.
应用推荐