利用扫描电子显微镜观察了6种蝶复眼小眼面的表面结构。
The ommatidial surface ultrastructure of ommateum of 6 butterfly species were observed with scanning electronic microscope.
利用扫描电子显微镜对材料的磨损表面进行了观察和分析。
And the worn surfaces morphologies of the reinforced PTFE composites were examined with scanning electronic microscopy (SEM).
利用扫描电子显微镜对微细化淀粉的颗粒形貌进行了分析比较。
The micronized starch granular was analyzed and compared through Scan Electron Microscope.
方法：利用扫描电子显微镜（SEM）观察COM的生长和聚集。
Methods: studying growth and aggregation of COM crystals using the scanning electron microscopy (SEM).
利用扫描电子显微镜对我国产珠蕨属5种植物的孢子进行了观察。
Spore morphology of 5 species of genus Cryptogramma from China was examined by SEM.
利用扫描电子显微镜对我国产蹄盖蕨属44种植物的孢子进行了观察。
Spore morphology of 44 species of the genus Athyrium from China was examined by SEM.
本文利用扫描电子显微镜观察“JT烧伤液”对烧伤感染细菌作用的超微现象。
Observing the effect of "the JT liquid of burn" on bacterial infection by using SEM.
利用扫描电子显微镜探讨了不同的溶剂体系和表面活性剂对纺丝过程及纳米纤维形态的影响。
The effects of solvent, surfactant on the process of electrospinning and the morphology of the electrospun nanofibers were studied with scanning electron microscopy(SEM).
利用扫描电子显微镜，对经历不同温度和冷却方式的纸面石膏板试块的显微结构进行观察和分析。
Microstructure of thistle board undergoing different fire scene temperature and cooling ways was observed and analyzed by using SEM.
利用扫描电子显微镜对我区草甸草原、典型草原及荒漠草原中30种主要植物的花粉粒进行了观察。
Pollen grains collected from 30 grassland species covering the meadon plants, typical grassland plants and dessrt steppe plants were examined by scanning electron microscope.
采用能量色散x射线谱(EDS)分析得出涂层成分，利用扫描电子显微镜(SEM)观察涂层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS). The morphology of the coatings was observed by scanning electron microscopy (SEM).
采用能量色散x射线谱(EDS)分析得出镀层成分，利用扫描电子显微镜(SEM)观察镀层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS), and the morphology of the coatings was observed by scanning electron microscopy (SEM).
并利用扫描电子显微镜(sem)和x -射线光电子谱(XPS)对薄膜的形貌和组分进行了表征。
The surface morphology and the component of the film has been analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectrometer (XPS).
从矿用锚喷机分料盘的实际工作条件出发，利用扫描电子显微镜和电子探针观察分析分料盘的磨损机理。
According to the actually operation condition of the lining plate of concrete shotting machine, the wear mechanism of the lining plate has been analyzed with SEM.
利用扫描电子显微镜和能谱分析(EDS)对焊缝断口进行成分分析，研究焊接接头的焊接缺陷及断裂机制。
Weld fracture components were analysed by SEM and EDS, joint defect and fracture mechanism were also researched.
结果表明：利用扫描电子声显微镜技术在不对样品表面进行任何处理的情况下，可以直接对电畴结构进行观察。
The results show that the SEAM technique can be used directly to observe the domain structure of ferroelectric ceramics and single crystal materials without any treatment for test samples.
利用扫描电子显微镜研究了PVC用抗冲击改性剂的喷雾干燥粒子实际形态，提出了提高表观密度的基本思路。
The real morphology of the modifiers were studied by SEM. The methods and ideas for improving the apparent density of modifiers for the PVC were put forward.
利用扫描电子显微镜（SEM ）、显微喇曼光谱、X射线衍射等手段对合成的金刚石薄膜的成分与结构进行了分析。
The constituents and the structures of the diamond films have been identified by means of scanning electron microscopy (SEM), Raman spectroscopy and X-ray diffraction.
利用扫描电子显微技术和多功能偏光显微技术系统研究三氯氧磷交联淀粉在生物降解过程中的颗粒形貌和结晶结构变化情况。
The appearance and crystal structure change in the biodegradation of partially degraded starch granules were examined using SEM technology and multifunctional polariscope.
利用扫描电子显微镜(sem)、透射电子显微镜(tem)和X射线光电子谱(XPS)对样品的形貌、结构及组份进行表征。
Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were used to evaluate the structure and composition.
利用扫描电子显微镜观察分析了聚碳酸酯、尼龙6、低密度聚乙烯的微观断裂行为，并对其断裂起因、断裂过程及断裂形态进行了讨论。
The fracture morphology of PC, PA6, LDPE is analyzed by using scanning electron microscopy (SEM), and the fracture cause, fracture process and fracture morphology are discussed respectively.
利用扫描电子显微镜(SEM)分析了阳极氧化后及产品失效后阳极钽芯表面介质膜的微观结构，并对液钽电容器失效机理进行了探讨。
The surface microstructure of anodic tantalum core was analyzed by scanning electron microscope (SEM), and then analyzed the failure mechanism of wet tantalum capacitor.
为解决发电机定子线圈槽的异常升温现象，利用扫描电子显微镜、能谱仪等现代分析手段对300MW发电机定冷水系统不明异物进行了表征和分析。
To solve the problem of abnormal temperature rise of generator stator slots, unknown foreign powder in the 300MW generator stator water cooling system was characterized and analyzed by SEM and EDS.
只有相对原始状态的材料才拥有兰德曼所需要的研究对象，因此他的研究小组必须使用利用电子束表面成像的扫描电子显微镜(下图)去寻找最好的珍珠层。
Only relatively pristine material has the goods Landman is after, so his team USES a scanning electron microscope (below), which utilizes a beam of electrons to image surfaces, to find the best nacre.
以下图片是用扫描电子显微镜，利用电子光束跟踪物体表面制作而成。由此拍摄出的黑白图像经着色后反映出虫卵的自然外观。
The images were made with a scanning electron microscope, which uses beams of electrons to trace the surfaces of objects.
扫描利用了一种叫做正电子发射X射线层析照相术(PET)的技术。 扫描用以监测脑中代谢葡萄糖（脑正常工作需要的营养物）的变化。
The scans, which used a technique called positron emission tomography (PET), were designed to monitor changes in the way the brain metabolised glucose, the fuel it needs to function.
扫描电子显微镜能利用x射线谱仪的附件来提供化学组份的信息。
The scanning electron microscope provides information on chemical composition by use of X-ray spectrometer attachments.
扫描电子显微镜能利用x射线谱仪的附件来提供化学组份的信息。
The scanning electron microscope provides information on chemical composition by use of X-ray spectrometer attachments.
应用推荐