筒体应具有足够的刚度和强度。
The tube body should have enough of just degree and strength.
讨论用有限元分析温度对结构刚度和强度的影响。
The thermal influence on stiffness and strength of structures is presented.
研究了加肋腹板连续组合梁的横向连接刚度和强度。
The strength and stiffness of continuous composite beams with stiffened web are investigated.
麻花钻切屑槽的螺旋形布局对钻头的刚度和强度有很大的影响。
The spiral composition of the chip flute of the twist drill has great influence on the rigidity and intensity of drill.
给出了复合材料蜂窝夹芯结构修理前后的刚度和强度变化规律。
The authors also present the rule of changes of stiffness and strength of composite honeycomb sandwich before and after repair.
砂岩的刚度和强度均随侧压的增大而增大 ,具有明显的压硬性。
The stiffness and strength of sandstone increase with increasing of its confining pressures presenting obvious compressive hardening.
隔振器有利于减小耦合系统的动力响应,从而提高桥梁的刚度和强度。
Isolator can help reduce the dynamic response of coupled systems, to improve the stiffness and strength of Bridges.
应用CAE系统软件计算承力密封框的刚度和强度,并分析了计算结果。
The structural strength and flexural rigidity of the fuselage main frame are computed and verified by CAE system software and the results are analyzed.
车架结构运用有限元分析技术,工作受力部位采用增强刚度和强度结构。
Finite element technology adopted in frame makes more strength in working stress position.
在此基础上,进行了内燃机曲轴—轴承系统摩擦学、刚度和强度的耦合研究。
Then, the coupling of tribology, stiffness and strength of crankshaft-bearing system for internal combustion engine is studied.
指出了影响车体刚度和强度的主要因素,提出了增强车体刚强度的技术措施。
The main factors influencing the stiffness and strength of the body are pointed out, and the technical measures for improving the body stiffness and strength is suggested.
随着冷处理的增加金属的刚度和强度得到提升,但同时韧性和延展性降低了。
Strength and hardness increase with increasing amount of cold work and at the same time the remaining ductility and malleability decreases (Figure 6.1).
综述了近年来国内外对三维编织复合材料的刚度和强度性能预测方法的研究进展。
Recent developments of research on predicting stiffness and strength of 3d braided composites were summarized.
而岩石的刚度和强度均随围压的增大而增大,其破坏机制也均随围压的增大而发生转化。
The stiffness and strength of sandstone increase with confining pressures increasing and the failure mechanism of the rock transforms with the increase of confining pressure.
研究了坞墩的刚度和强度、船舶坐墩的总纵强度及局部强度、船舶倾侧等对进坞坐墩的影响。
The rigidity and the strength of block, as well as the longitudinal and local strength of docking ship and the effect of the ship heeling on blocks also studied.
随动部件是模态悬挂测试系统机架部分的关键结构,其刚度和强度直接影响了整个系统的性能。
The follow-up unit is the essential structure of the rack section of modal analysis test suspension system, its rigidity and intensity directly influence overall performance of system.
在内核构件已经确定的情况下,研究了外围构件的刚度和强度对整体构件稳定极限承载力的影响;
The effects of stiffness and strength for outer members on stability ultimate bearing capacity of whole members were studied when the core members had been determined.
根据承力密封框的使用环境和设计要求,确定了对其进行刚度和强度分析时所需的各种主要参数;
Simultaneously all the main parameters are determined according to the environment of fuselage airproof main frame and the design requirements in analyzing the rigidity and strength.
星载辐射制冷器的级间支撑,即要隔热,又要求保持一定的刚度和强度,保证辐冷器结构的完整性。
The support straps system of spaceborne radiant coolers requires thermal isolation and it requires to remain high stiffness and strength in order to ensure the radiant coolers structural integrity.
采用试验和有限元的方法研究了离合器从动盘结构的刚度和强度,并对应力集中的区域提出了改进方案。
The stiffness and strength of clutch driven plate assembly were experimentally and numerically studied, an improvement design on the stress concentration was given.
它要求有相当高的阵面精度、刚度和强度,但有限空间和重量指标使空间与刚度,刚度与重量这些固有矛盾尖锐化。
It should have high surface precision and enough intensity and rigidity. But the limited space and weight target make the contradictions between space and rigidity, rigidity and weight.
瞬态动力学分析通过考察联轴器传递转矩过程中的最大应力、最大位移及其发生部位来分析联轴器的动态刚度和强度状况。
The transient dynamic analysis researched the dynamic stiffness and strength of the joint by investigating the maximum stress and strain when it transmits torque.
土壤液化是在诸如地震的这种灾害中,土壤的强度和刚度被弱化的一个过程。
Soil liquefaction is the process by which the strength or stiffness of soil is weakened by an event like the shaking of an earthquake.
预应力技术可以改善钢结构的强度、刚度和稳定性,调整钢结构的动力性能。
Prestressed technology can improve the strength and rigidity and stability, and adjust the dynamic performance of steel structure.
我们跑应力有限元分析计算,确定了框架需要得到加强的最大强度和刚度,然后加强这些领域更多的碳纤维。
We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.
玻璃钢夹层结构的导弹包装箱比加肋玻璃钢导弹包装箱具有更高的刚度、强度和稳定性,更能满足产品设计要求。
Missile packing box of FRP sandwich construction has higher stiffness, strength and stability than ribbed FRP missile packing box, it can meet higher requirement of product design.
它具有高强度,刚度和良好的热变形温度。
It exhibits high strength, rigidity, and good heat distortion temperature.
结构在使用过程中可能会出现各种失效形式,例如静载强度失效、刚度失效和疲劳失效等失效形式。
It is possible that many failure modes have emergence during the structural service period. For example, dead load strength failure, stiffness failure and fatigue failure.
结果表明,刚架结构的强度和刚度是足够的。
The results show that the stress intensity and stiffness are enough.
镁合金是比重最轻的结构材料,具有高的比强度、比刚度和良好的磁屏蔽性、阻尼性、切削加工性等优点。
As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic-shielding ability, good damping ability, and good machinability.
应用推荐