数控切削加工工艺参数是数控切削加工过程的基本控制量。
It is the preparation method parameter which is one of the basic controlling parameters in the processing course of Numerical control cuttings.
提出IPO模型的建立思路，建立了切削加工过程的IPO模型。
The idea of building IPO model is proposed. The IPO model of the cutting manufacture process has set up.
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The feed speed is automatically adjustable on line and this interpolation method can be applied to the adaptive machining process and the flexible manufacturing.
依据切削加工过程的绿色特性分析及其IPO模型，对该加工过程进行清单分析。
According to the green characteristic analyses and the IPO model of the cutting manufacture process, this manufacture process carried on inventory analysis.
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The feed speed is automatically adjustable on line and this interpolation method can be applied to the adaptive…
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The feed speed is automatically adjustable on line and this interpolation method can be applied to...
最后，本文针对微槽切削加工过程，分析了切削参数和刀具磨损对工件毛刺形成的影响。
Finally, the influence of cutting parameters and tool wear on burr formation are studied through the experiment of machining micro-flute.
在总结有限元法在切削加工分析方面的主要应用的基础上，展望了切削加工过程有限元分析的未来研究趋势。
The main applications of finite element method (FEM) in cutting process analysis are summarized and the future trends on FEA in metal cutting process are discussed.
基于刚塑性有限元方法建立了切削加工过程仿真模型，通过模拟获得了切削加工过程中刀具应力的分布和变化情况。
The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
数控切削加工过程中刀具的磨损与破损是数控机床常见的故障之一，而刀具的磨损与破损程度直接影响零件的加工质量。
Cutter attrition and breakage is one of the familiar faults of CNC machine tool, and the degree of cutter attrition and breakage directly influences the quality of the production.
要提高企业的竞争力，就要注意在切削加工过程中，降低生产成本的同时也注意考虑生产率，以便为企业获取最大的利润率。
To increase the competitiveness of the enterprise, it is necessary to pay attention to productivity and cost so as to get maximum profit.
针对金属切削加工过程中经常出现的振动现象，对切削颤振发生的各种原因及影响因素进行了分类，并从刀具和切削参数的角度进行了详细分析。
Aiming at vibration phenomena caused in metal machining process, This paper classifies the reason and the factors of influence, which are expounded from the cutting tool and the cutting parameters.
金属切削加工过程中，在已加工零件的表面上存在鳞片状的毛刺，本文通过对鳞刺成因进行探讨，分析其产生的过程和原因，找出控制鳞刺的方法和措施。
In the process of metal machining, flake's burr occurs on the surface of the processed part. With analysis of causes of flake's burr, this paper explores countermeasures to control the flake's burr.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量，对它们进行预测分析和过程控制具有十分重要的意义。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
将三维动态切削力施加到机床响应模型上，仿真出实际加工过程中存在于刀具和工件之间的动态位移参量。
The dynamic increments in three-dimensions between the cutting tool and workpiece have been simulated by putting the cutting forces to the machining system response model.
并且结合常见的6112曲轴的切削加工进行案例研究，证明了此制造过程百分制环境评价方法切实可用，值得推广。
And study on the case in cutting combining 6112 bent axles. Proving this percent environment evaluation method in the manufacture process can be used. And it deserve popularizing.
建立车削加工过程的模糊自适应控制系统，以恒切削力为控制指标，设计了车削加工过程模糊控制器。
A fuzzy self-adaptable control system is established. By setting the constant cutting force as the control objective, a fuzzy controller for the turning process is designed.
集中论述了在实际微孔钻削加工过程中主切削刃对微钻头折断和微孔加工精度的影响。
This article focused on drilling in the actual processing of microporous main cutting edge of micro-drill breaks and microporous processing accuracy.
在钛合金车削和拉削加工过程中，对切削温度进行试验研究有着十分重要的意义。
During the turning and broaching operation of titanium alloys, experiments and researches of cutting temperatures are of great significance.
自适应切削可以保证在加工条件不断变化的情况下使切削过程始终处于最佳状态。
The adaptive cut can make cut process at optimum condition all along, in case the machining conditions are constantly changing.
介绍了一种用常规的自然热电偶和标准热电偶方法实现高速加工过程中切削温度的直接接触式测量的计算机辅助测温系统。
A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples.
切削力是金属切削过程中的主要物理现象之一，其大小直接影响切削热的产生，并影响刀具磨损和耐用度，工件的加工质量。
Cutting force in metal cutting process, one of the main physical phenomena, it is direct effects on cutting heat generation, the tool wear and durability and the workpiece processing quality.
本文对于薄壁件切削稳定性的研究现状进行了讨论，并分析了薄壁件加工过程中加工变形的影响因素。
This paper discusses the research state of cutting stability for thin-walled parts, and analyses the deformation factors in machining thin-walled parts.
文章提出一种模型来预测复杂型面加工过程中的切削力。
This article presents a model that can calculate milling forces in complex surface machining.
金属切削过程中，不同的切削参数对零件的加工精度影响是不同的。
Different cutting parameters may have different influences on machining accuracy in metal cutting process.
为提高铣削加工的安全性和生产效率，有必要在加工实际进行之前准确地预测切削过程的物理信息，如铣削力、刀具振动等。
To improve the safety and efficiency of milling process, it is necessary to predict the physical features such as milling forces and vibration parameters, etc. before actual cutting.
为提高铣削加工的安全性和生产效率，有必要在加工实际进行之前准确地预测切削过程的物理信息，如铣削力、刀具振动等。
To improve the safety and efficiency of milling process, it is necessary to predict the physical features such as milling forces and vibration parameters, etc. before actual cutting.
应用推荐