分析动力学与分析结构力学在数学理论上是一致的。
The mathematical theory is the same for analytical dynamic mechanics and analytical structural mechanics.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
运用结构力学的矩阵分析法和计算机对抽芯作业车主体金属结构做了力学分析与计算，进而校核主体金属结构的强度、刚度和稳定性。
Mechanical analysis and calculation of the truck's metal construction are made by the matrix method, and the strength, rigidity and stability of the metal construction are checked.
对原设计成果采用结构力学方法的合理性作了分析。
The rationality of original design result by using the method of structural mechanics has been analysed.
本文探讨了结构力学分析方法——非线性有限元性在预测水平井钻进中的工程应用。
This paper discusses the apply in the drilling engineering by the method of nonlinear limited element, which is about the torque of string and direction of bit and while drilling.
平面体系几何组成分析是结构力学教学的重点和难点，初学者总感到抽象难懂。
The analysis of plane geometric composition is a emphasis and difficult point of teaching, it is abstract and complicated for the beginner.
从结构力学角度来研究阀芯的变形及应力分布情况，进行流固耦合分析，研究其失效的可能原因。
This paper investigate the distributing complexion of distortion and-stress of valve core, make the analysis of coupling of fluid and solid, investigate the reason of invalidation.
文中对计算结构力学程序设计的难点作了分析。
The paper has analysed the difficulties m programming for computational structure mechanics.
研究利用参数化有限元技术分析复合材料层合结构力学性能和结构可靠度的方法，并基于ANSYS软件平台开发相应的参数化有限元程序。
Parametric FEM technique is used to analyze the mechanical performance and structural reliability of composite laminate structures. The parametric FEM code based on ANSYS is given.
对砖拱楼盖，采用拱框结构力学模型进行了自由振动分析，并探讨了局部振动和整体振动等同题。
The free vibration analysis is conducted by using arch-frame structure model for brick arch floor, from this the local vibration and the whole vibration of the arch are studied.
将有限元处理的内力值与结构力学简化计算的内力值进行初步比较，查找分析产生差别的原因。
The internal force of the finite element method compares with the plane results of the mechanics of structure method, finding the differences between them, and then analyzing the reason.
目前软岩支护问题突出，在一些软岩巷道中，用于支护的u型钢支架破坏比较严重，本文对支架进行了结构力学分析，并从支架自身结构方面对破坏原因进行了分析。
Through the structural mechanics analysis of U-shaped steel support widely used in soft-rock supporting, the author has found out the failure causes from the support structure itself.
几何组成分析在结构力学中是重点，常应用于求解超静定结构，文章用几何组成对力法、位移法和力矩分配法进行了分析。
Geometric composition analysis is focal point in structural mechanics and often used in finding the solution of statically indeterminate structure.
运用散体结构力学理论，以新的方法分析垂直型埋刮板输送机物料稳定输送的条件，并导出了物料运行阻力计算式。
Bulk mechanics theory is applied to discussing conditions that vertical en masse conveyor conveys material steadily and deriving resistance to moving material.
前言： 运用散体结构力学理论，以新的方法分析水平型埋刮板输送机“物料整体移动”的条件。
The prerequisites for the mass movement of the material in a horizontal chain conveyor was analyzed with a new method in accordance with the structure mechanics of bulk material.
在试验的基础上，讨论分析了空间辐照对碳纤维面板铝蜂窝夹层结构力学性能的影响机理。
On the basis of a lot of experimental data, the laws of particle radiation and ultraviolet ray effecting the mechanical properties are found and the effecting mechanism is analyzed.
因此本文针对城市轨道交通的特点，着重对高架桥上整体道床的钢轨支承间距进行研究，计算分析了不同轨枕间距对轨道结构力学特性的影响。
In this paper, aiming at the characteristics of urban track traffic, research has been done mainly on support spacing of rail on integrated ballast bed of viaduct.
阐述了结构力学中有限元法分析的理论依据及一般求解力学问题的过程。
In this paper, the analysis of finite element of structure mechanics is introduced.
对原设计成果采用结构力学方法的合理性作了分析。
The rationality of original design result by using the method of structural mechanics has...
充分利用三维实体数据的完整性，实现各层次二维图形的自动生成和结构力学分析所需的数据模型的自动建立；
Making full use of integrity of 3D model information, the system automatically generates various kinds of 2D drawings and constructs the data model for structural analysis.
从结构力学角度来研究阀芯的变形及应力分布情况，进行流固耦合分析，研究其失效的可能原因。
This paper investigate the distributing complexion of distortion and-stress of valve core, make the analysis of coupling of fluid and solid, investigate the reason of inv...
[7]于福权。齿轮式气动马达结构力学有限元分析[d]。长春：吉林大学，2011。
YU Fuquan. Finite Element Analysis of Structure Mechanics of Gear Pneumatic Motor [D]. Changchun: Jilin University, 2011.
然后，利用样本点数据对黏弹性有限元模型的装药进行了结构力学分析；
Secondly, the grain structure was analyzed using finite element method with sampling data.
在结构力学分析方面，以往的研究多是建立弹性或者弹塑性模型来研究格栅对沥青路面应力及弯沉的影响。
In the structural mechanical analysis, previous research is more to establish elastic or elastic-plastic model to study the grid reinforced effect on pavement stress and deflection.
通过对雪峰露天矿山顺层岩质边坡的岩体结构力学参数进行分析，应用响应面法计算边坡可靠度，结果与实际情况基本相符。
Based on the analysis of physical and mechanical parameters of bedding stratified rock slope of Xuefeng open pit, the rock slope reliability is calculated by the response surface method, th...
对负偏置结构力学特性进行了分析，给出了负偏置范围的确定方法。
Furthermore, the mechanical characteristics of the negative offset structure is analyzed and a method to determine negative offset range is presented.
文中，作者对“微结构力学”的概念及其研究内容、近期和远期研究课题进行了分析，并提供了开展本项研究工作的技术路线建议。
This paper gives the concept of soil micromechanics and its research contents, analyses the recent and long term study tasks, and briefs the te...
文中，作者对“微结构力学”的概念及其研究内容、近期和远期研究课题进行了分析，并提供了开展本项研究工作的技术路线建议。
This paper gives the concept of soil micromechanics and its research contents, analyses the recent and long term study tasks, and briefs the te...
应用推荐