数字式艺术使用广泛的机构内部的实验室设施为产品分析用试样，导致上面类回顾和信得过实验室试验。
Digital Arts USES extensive in-house lab facilities for product assays, producing top-class reviews and trustworthy lab tests.
用权函数方法对中心裂纹巴西试样的对径加载作了-复合型断裂分析。
The mixed mode fracture of center cracked Brazilian disk specimen subjected to diametral compression is analysed by weight function method.
本文用边界元法对销钉接触角及销钉孔半径对三种电流输入方式下紧凑拉伸试样的电位函数影响进行了分析。
The boundary element method is used to analyze the influence of pin con - tact Angle and pin-hole radius on the potential function of compact tensile specimen under three current input types.
用有限元法分析、计算试样中空间电荷引起的电场畸变方便、迅速，表现直观。
With the example of space charge measured by PEA, the distribution of electrical stress in sample due to space change is analyzed and calculated in detail using finite element method.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
用铁谱分析法测定球和盘试样的磨损，不但精度高，而且收集的磨粒还为深入研究磨损机理创造了条件。
Wear test method using ferrography gives not only high precision, but also a conventional collection of wear debris, which are useful for further study.
试样用酸溶解后，取所制溶液分析钙、钡。
Test specimen shall be dissolved with acid. The solution shall be used for analyzing calcium and Barium.
用俄歇电子谱(aes)分析了铀试样处理前后表层的成分变化。
The composition of surface layer of uranium and treated uranium have been analyzed respectively by Auger Electron Spectroscopy (AES).
用此方法对某型号发动机试样阶段结构可靠性进行了实例分析，得出了较满意的结果。
By using it, structure reliability of the some motor in its preproduction model stage has been analyzed and the more satisfied results obtained.
描述了用实验观测和分析的方法考察砂浆试样在受压过程中裂纹扩展和变形响应之间的固有关系。
The experimental investigation and analysis are presented for exploring the intrinsic link between compressive deformational response and crack behavior of the mortar specimens.
用热塑性试验评定2219铝合金的液化裂纹敏感性，利用扫描电镜对热塑性试样断口进行了分析。
Hot ductility testing was used to evaluate the liquation cracking susceptibility of aluminum alloy 2219. The fracture surface of hot ductility samples was examined using SEM.
用本方法分析，样品和标样必须是均匀的，标样和试样的成分要相似。
In the analysis with the method samples and standards must be homogeneous in composition.
本文用偏最小二乘法（PLS）方法来解析荧光的激发发射矩阵（EEM），直接定量分析荧光混合物试样。
An excitation-emission matrix(EEM) and partial least squares method (PLS) were used to quantitatively determine fluorescent mixed samples.
开发了用于全蒸发技术的测量软件，对影响测量结果的因素，诸如分析用样量、信号损失与试样残留等进行了研究。
Analysis software for total sample evaporation technique has been developed. The factors of interference measurement, such as sample size, signal intensity loss and sample residue, have been studied.
用测试样本对所建模型进行外推性能测试，对结果进行分析，证明建模具有可行性以及所建模型具有良好的拟合性能和外推性能。
Simulating the model with the testing data, analysis the network performance, proving the feasibility of modeling and the model has the feature of high-precision and fitting.
用TG - DTA差热热重联用分析仪对影响医疗垃圾热解特性的主要因素，包括垃圾种类、升温速率、试样质量、实验终温和保温时间等进行了实验研究。
The main influence factors on thermal decomposition of medical waste, such as sample type, heating rate, sample mass, end-temperature and heat-insulation time, were investigated by using TG-DTA.
用声发射监测带有不同深度缺口的Q2 35钢试样的拉伸试验，由声发射信号分析判断缺口发生破坏的情况。
The tensile test of Q235 steel samples with notches of different depths and their damages were monitored by acoustic emission technique.
用该方法测定了铁、渣、浸钒渣等六种不同类型试样中镓的含量，分析其精度符合要求。
Gallium contents in 6 different types of sample including iron, slag, discarded slag after vanadium extraction are determined by this method with analysis accuracy up to requirements.
用铁谱分析法测定球和盘试样的磨损，不但精度高，而且收集的磨粒还为深入研究磨损机理创造了条件。
Wear test method using ferrography gives not only high precision, but also a conventional collection of wear debris, which are useful for further stud...
介绍了用硝酸及高氯酸处理试样后进行铁、铜含量的测定分析，方法简便，回收率高，分析结果令人满意。
Another pretreating method was that the sample was dissolved in nitric acid and perchloric acid. It proved that the method was simple and convenient with accurate results.
对冲击磨损试验后试样进行了失重测量，并用SEM分析磨损表面形貌，用OM观察金相组织。
The mass loss after impact-wearing was measured, the morphology on the wear surface of the steel was analyzed by SEM, the microstructure was observed by OM.
然后采用不同直径的试样测定其临界淬透直径，用金相法观察其组织变化，分析其低淬透性原因。
The structure was observed with the metallograph. The reason of low hardenability of steel Cf53 is analysed.
抗滑分析计算所用土动力特性参数是用原状试样做共振柱试验和振动单剪试验直接测定的。
In the end, we calculated the stability factor with dynamic characteristic parameters of undisturbed sample taken from the ground. Those parameters were measured by the resonant column test and cy...
抗滑分析计算所用土动力特性参数是用原状试样做共振柱试验和振动单剪试验直接测定的。
In the end, we calculated the stability factor with dynamic characteristic parameters of undisturbed sample taken from the ground. Those parameters were measured by the resonant column test and cy...
应用推荐