本文讨论了潜艇圆筒形耐压壳体结构的分析与优化。
In this article, structure optimization and analysis of a cylindrical pressure-resisting hull of submersible vessel are discussed.
最后，进行了基于成形因素的车身结构灵敏度分析与优化。
The sensitivity analysis and optimization of car body structure were then carried out.
本文介绍了国内外有限元分析与优化设计的相关研究进展。
This dissertation introduces related developments of finite element analysis and structural optimization at home and abroad.
多学科分析与优化已成为近年来飞行器设计的重要研究方法。
Multdisciplinary analysis and optimization is recently becoming a important flight controller design's research method.
项目组还将研究成果应用于电子商务和通信网络性能分析与优化。
The item member apply the research results to performance analysis and optimization of electronic business and communication network.
针对双汽源型燃气-蒸汽联合循环，进行了热力特性分析与优化匹配计算。
A model was set up for the calculation of the thermodynamic characteristics and matching optimization of gas-steam co-cycle with dual steam sources.
为了支持更广范围的过程自动化分析与优化，提出了一种基于活动的资源能力建模方法。
In order to support the analysis and optimization of the enterprise process automation in a wide scope, an activity-based resource capability modeling method was introduced.
目前复杂环境的EMC分析，计算量过大，耗时太长，使分析与优化遇到实质性的困难。
Prohibitive computation resources and too much time are needed for EMC analysis of complicated EM environment.
提出用数值分析与优化相结合的方法对6-SPS并联机器人机构的工作空间进行研究。
An approach combining numerical analysis with optimization for the workspace analysis of the parallel manipulator 6 - SPS is proposed.
研究了公差分析与优化设计的方法，分析了导引头伺服机构公差分析与设计的主要关键技术。
A method of tolerance analysis and optimization design is investigated. The main key techniques of tolerance analysis and design of the servo mechanism of the guidance head is analyzed.
随着铜闪速熔炼过程指标要求的提高，对铜闪速熔炼过程进行数值分析与优化就显得日趋重要。
With the development of flash smelting, it shows more and more importance of the numerical analysis and optimization of flash furnace.
并通过施工总进度分析与优化、主要业务流程仿真运行改进，验证了该方法的可行性及实效性。
And the progress of construction through analysis and optimization, simulation run major business process improvement, test the feasibility of the method and effectiveness.
本文方法也可用于基础隔震结构和无损伤“加层减震”加固结构的随机地震响应分析与优化设计。
The method of the paper can be used to random response analysis and optimization design of the structure with base isolation.
机床结构模态分析与优化设计软件MAOD使机床结构动态特性的分析及其优化可以在微型机上完成。
The software of machine tool structure Modal Analysis and Optimal Design (MAOD) can be applied to the analysis and optimization of dynamic mechanical characteristics on a microcomputer.
本文主要利用FEA及PVD技术，针对细小凸模的断裂和磨损两种失效形式，进行失效分析与优化。
In this paper, the failure of pin punch was analyzed and optimized based on FEA and PVD, according to failure mechanism of fracture and wear of pin punch.
结合包装工程学科的有关领域，论述了计算机辅助包装设计、分析与优化的若干进展，介绍了网络辅助包装设计技术。
This paper discusses the advance of computer aided design, analysis and optimum in packaging engineering, and introduces the technology of net aided packaging design.
针对机床产品结构动力学分析与优化设计的需要，进行了某型号精密卧式加工中心数字化性能与优化设计的分析计算。
According to dynamic analysis and optimal design of machine tool structure, digital analysis and optimal design of some model of precision horizontal MC was developed.
电磁结构设计中，采用电磁场解析计算进行初步设计，进而采用有限元法对致动器的结构和线圈参数进行进一步的分析与优化。
The magnetic circuit structure of actuator is designed by analysis method. The structure and parameters are analyzed and optimized by electromagnetic field FEM.
本文针对某型着陆装备着陆要求和指标，以双气室缓冲气囊为对象，开展了着陆缓冲气囊缓冲过程数值模拟分析与优化设计研究。
Numerical simulation and optimal design of the process of double-chamber airbag landing are studied aimed at landing requirement of the landing equipment.
本论文从ERT技术的原理性研究出发，针对该技术中电极结构设计进行了分析与优化，并对单电极电流激励模式做了深入的研究和优化。
In this paper, the electrode structure and single electrode current exciting mode are deeply analyzed and optimized by the fundamental study of ERT technology.
提出了结合柔性网络计划技术的进度分析与优化方法，包括工期分析及资源优化，在此基础上提出了基于可视化动态仿真的施工进度实时管理与控制方法；
The methodology of visual dynamic simulation for construction schedule is presented in this thesis, visualization of founding model, calculating and result of schedule simulation is realization;
维度建模有助于优化数据仓库的查询与分析。
Dimensional modeling helps us optimize our warehouse data for queries and analysis.
最近发布的VisualStudio 2008SP1中包含了与FxCop相同的修改和分析优化，参见如下列表。
The recently released Visual Studio 2008 SP1 includes the same fixes and analysis improvements listed below.
架构师可能也要通过制定与目标运行时及解决方案组件的部署位置相关的决策，来优化分析师定义的流程模型。
The architect may also refine the process model defined by the analyst by making decisions concerning the target run times and where the solution components are to be deployed.
开发人员应该就Web服务设计中使用什么建模技术和优化方案的问题与业务分析人员团队进行沟通。
The developers should communicate with a team of business analysts on the issues of what modeling techniques and optimization schemes to use in designing web services.
Lucene内存方法将基于RAM的存储与非常快的文档分析器组合在一起，方便了针对高度优化的实现进行自定义。
The Lucene in-memory approach combines RAM-based storage with a very fast document analyzer that trades ease of customization for a highly optimized implementation.
生命线工程网络抗震可靠性分析是进行生命线工程系统规划、设计、改造与优化的基础。
Reliability analysis of lifeline systems under seismic action is the basic problem in the lifeline systems' layout, design, rebuilding and optimization.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
可能需要进行散热，结构和机械完整性建模与分析，以便预测和优化系统性能。
May be required to perform thermal, structural and mechanical integrity modeling and analysis to predict and optimize the system performance.
可能需要进行散热，结构和机械完整性建模与分析，以便预测和优化系统性能。
May be required to perform thermal, structural and mechanical integrity modeling and analysis to predict and optimize the system performance.
应用推荐