中国的出口模型，依然在很大程度上依赖廉价出租劳动力和土地给外国人。
China's export model, then, still consists in big measure of renting out cheap Labour and land to foreigners.
在引入基本的出口模型之后，假设出口商可以进入远期外汇市场进行交易。
After introducing the basic exporting model, I will assume that the exporters can hedge currency risk in the forward exchange market.
在这个模型中，我们应该找到最近的紧急出口，以模拟人口疏散。
In this model, we should find the hithermost emergency exit to simulate the population evacuation.
利用软测量的思想，采用神经网络建立软测量模型和小波分析进行数据处理，以克服传统方法的不足，提高出口带钢厚度预测的精度。
The idea of soft-measurement is used in our work and neural network and wavelet transform are adopted to overcome deficiency of traditional method and improve forecast accuracy of exit thickness.
根据流体力学原理，用离散涡方法建立了在复平面上模拟喷嘴出口流场的一套完整模型。
On the basis of fluid mechanics, a comprehensive model for simulating flow field at nozzle exit is developed by using desecrate vortex method.
运用径向基函数网络结合偏最小二乘回归的方法建立了甲醇合成反应器出口甲醇含量的预测模型。
A prediction model of methanol content at the exit of methanol synthesis reactor was proposed through radial basis function networks and partial least square regression approach.
探讨了灰色预测模型GM(1,1)在磨煤机出口温度预测中的应用。
The application of Grey models GM (1, 1) in the exit temperature prediction of coal pulverizer is discussed.
介绍了出口澳大利亚c37型漏斗车车体有限元分析模型、载荷工况和结果。
This paper describes the finite element analysis model, load condition and results of C37-type hopper car body exported to Australia.
模型中考虑了人群密度对疏散能力的影响，改变以往把建筑出口疏散能力视为常数而带来的不能真实反应其疏散能力的状况。
The model considered the influence of the crowd density on the evacuation capability, and the capacity of the egress was taken as a variable rather than a constant as former.
我公司是以建筑模型、机械模型制作为主，工艺领先于同行前列，模型产品主要出口日本，韩国为主。
Our company is building models, mechanical model-based, technology-leading counterparts in the forefront of model products are mainly exported Japan, South Korea-based.
本文运用恒定市场份额模型(CMS)，对我国蔬菜出口贸易变动进行阶段分析，以寻找蔬菜出口增长的主要原因。
This article USES constant market share model (CMS) to carry on the stage analysis on Chinese vegetables export trade change, and seek the primary causes for which the vegetables exportation grow.
本文建立了空调车的出口风温自动化系统的模型。
利用SIMPACK建立某出口2b0机车动力学模型，分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响。
The dynamic model of a 2b0 locomotive for export is built with software SIMPACK to analyze the influence of longitudinal position of the locating node for tumbler axle-box on locomotive dynamics.
提出基于场馆座位数量、出口个数的疏散时间预测模型。
Egress time forecast model was also built based on number of seats and exit gate in venue.
给水泵汽轮机模型采用TUPWR算法，给水泵系统采用SFPUMP算法，最小流量阀采用SOVLV算法，泵出口流量的关系采用压力节点进行计算。
TUPWR algorithm was adopted for the pump turbine model, SFPUMP for feed pump system, SOVLV for minimal flow valve, and pressure node for calculating the discharge rate of the pump.
该模型展示了并购所引起的出口竞争对手之间的国际溢出效应。
The model highlights international spillovers between rival exporters that result from mergers.
这部分的分析将分为两个方面：面临单一出口市场的出口商行为和供应国内外两个市场的出口商模型。
This issue will be divided into two parts: the models of exporters with the single exporting market and those of exporters with the domestic as well as foreign markets.
针对武隆隧道出口处穿越楼房基础的工程实例，通过合理的简化和假设建立三维仿真模型。
On the study of the engineering practice of excavation of Wulong tunnel under building foundation, the three dimension numerical modeling was established by reasonable simplification and hypothesis.
建立了母管制系统给水偏移对煤耗量影响的数学模型，并考虑了加热器出口水温与给水量的关系。
A model is established to study how feed - water excursion affects the coal consumption, considering the relations between the temperature and the flux of the feed - water flowing out the heater.
进一步研究了信号控制与道路出口渠化的组合问题及其模型和求解算法。
Furthermore, the model is extended to formulate a combined problem of signal control and channelization at road exits.
本文以日本作为研究对象采用恒定市场份额模型分析中国蔬菜出口日本增长的影响因素。
Uses the constant market share model to analyze the influence factor of Chinese vegetables to Japan in the article.
调整计算模型进、出口气流分布板局部阻力，可以获得平滑的斜气流流型。
By adjusting the resistance of gas distribution screen of numerical model obtained smooth SgFT.
该概念性模型对于流域出口泥沙资料稀少的地区具有很高的应用价值和协助流域管理的潜力。
This conceptual model provides a new option for areas with sparse sediment data series at watershed outlets , and it has a great potential in assisting watershed management.
有斜切模型的喷管形状不对称，内流在出口处产生的扰动在较长一侧喷管壁反射，出现激波现象，引起流动的变化。
Because nozzle shape with oblique cut models is asymmetric, the disturbance produced at the exit of nozzle is reflected on the longer side and causes shock waves in the inner flow.
运用出口贸易增长的动因模型，选取时间序列数据，尝试对影响广东出口贸易增长的动因进行实证分析与研究。
With the factor model of export trade growth, by sampling chronical data, the paper probes into the factors promoting Guangdong export trade growth.
这一部分从风险收益分析的角度研究了风险管理技术，对信用风险模型进行了阐述，提出出口企业信用风险管理的主要措施。
This part analyzes risk management technique from the risk-return point of view, explains credit risk models, gives main measures of export credit risk management.
运用投入产出分析法建立了工业产品进出口污染足迹计量模型，计算了中国20个进出口工业部门6类污染物排放系数及排放量等多组数据。
The pollution footprint model was built on the basis of the input-output analysis to measure the discharge coefficient and amount of 6 pollutants in 20 Chinese industrial sectors.
模拟结果和工业实测的出口温度和浓度相一致，从而证明了该数学模型对催化裂化提升管的预测是成功的。
The simulated results at the outlet are in good agreement with the experimental data, which demonstrates that the mathematical model can successfully predict what happened in FCC riser reactor.
模拟结果和工业实测的出口温度和浓度相一致，从而证明了该数学模型对催化裂化提升管的预测是成功的。
The simulated results at the outlet are in good agreement with the experimental data, which demonstrates that the mathematical model can successfully predict what happened in FCC riser reactor.
应用推荐