然后你将会一直绕另一辆车转，但当你从上面看，你们两个一直在向前行驶且你们的路径是凸形的。
You will then be making circles around the other car, but when seeing from above, both of you are driving forward all the time and your path will be convex.
反曲线饰纵断面部分为凹线，部分为凸形的檐口的线脚，尤用在古典建筑中。
A molding for a cornice, having a partly concave and partly convex curve in profile, used especially in classical architecture.
然后你将会一直绕这辆车转，但当你从上面看下来，会发现你们两个都在向前行驶并且你们的路径都是凸形的。
You will then be making circles around the other car, but when seen from above, both of you are driving forward all the time and your path will be convex.
泰森多边形法中的每个细胞镶嵌是一个凸多面体。
GM平均胸径还与坡位正相关； GM数量沿N→S的坡向梯度减少，而随坡度增大及坡形由凹转凸而增加；
The number of GM decreased as the slope exposure turned from N to S, as slope increased, and as slope shape turned from convex to concave.
相对于回形刀刃的凹曲线而言，这种刀刃具有一条延伸到刀尖的、温和的凸斜率曲线。
This blade has a gentle, sloping convex curve to the point versus the concave curve of the clip blade.
凸形切割：在细分下在几何形状中创建尖锐，凸形细节的提示和技术。
Convex Cuts: Tips and techniques for creating sharp, convex details in geometry under subdivision.
得到的吸附等温线分为三个不同区域：低压区等温线对压力轴呈凹形，高压区呈凸形，中间部分近似为直线。
The isotherm was devided into three different sections, at low pressure it is concave, at high pressure it is convex and the middle section it is nearly linear.
在参考基于顶点可见性的凹多边形凸分解算法的基础上，提出了改进的方法。
An improved algorithm is proposed based on the polygon convex decomposition algorithm based on point visibility.
为实现小凸多面物体面形快速重建，提出了基于投影轮廓的新方法。
A projective silhouette based method was proposed to reconstruct the shape of little convex polyhedron.
并提出对给定的凸而单调的型值点列判断这种保形插值存在性的算法。
An algorithm is presented which determines if there exists such a shape preserving interpolation for convex and increasing data points given.
结论凸齿钥匙上仿形刀增配痕迹倾斜角度随齿坡角的增大而减小。
Conclusion in tooth shape keys, the tooth slope angel increases, along with slope Angle of duplicated trace decrease.
但是凹坑形仿生非光滑传动滚筒随着实验时间的增长，其增摩效果受到一定的影响，效果不如凸包形仿生非光滑传动滚筒。
But as experiment time increases, the effect of increasing friction for driving drum with concave covering-layer is decreased, and much lower than the driving drum with convexity covering-layer.
在某些情况下，把一个螺旋形进一步分解成凸子集是必要的。
In certain case it might be necessary to further decompose a spiral into convex subsets.
利用构造出的多边形有理插值，采用凸多边形逼近任意凸域，通过区域边界温度离散值，插值近似区域内的温度场分布。
A convex domain is approached by a convex polygon, and the approximated temperature distribution within the domain can be interpolated with the temperature data at the boundaries of the domain.
伸展方式对于凹形边界和凸形边界具有不同的影响。
Stretch manner has different influences on concave boundary and convex boundary of a model.
任意平面多边形的凸分解。
基于解非线形规划的凸单纯形法，对一类线形分式规划的消耗系数矩阵进行灵敏度分析。
Based on the convex simplex method for nonlinear programming, a sensitivity analysis of consumption coefficient matrix in linear fractional programming is presented.
讨论了制作适用于近场集成光学头中的凸形、凹形微透镜和折衍射复合微透镜的灰度掩模技术。
The applications of gray scale mask technique in the fabrication of convex and concave microlens and hybrid refraction diffraction microlens are discussed.
采用了基于多边形凸包的方法提取弦线。
Based on polygon convex hull method, the chord line is extracted.
针对凸插值、凸光顺和保形插值等带约束条件的插值和光顺问题，提出一种信赖域方法。
This paper presents a trust region algorithm for solving the constrained interpolation and smoothing problems such as convex interpolation, convex smoothing and shape-preserving interpolation.
为提高工作性能，活塞裙部设计成中凸变椭圆型，立体靠模仿形车削是常用的加工方法。
To improve performs of engine, the piston skirt curve is designed to be middle convex and varied elliptic pattern, copying manufacturing with master piston is commonly used.
分析和计算都表明，正方形物体经光楔所成的像是凸侧面的钟形而不是凹侧面的钟形。
The analysis and calculation indicate that the image of a square for a wedge prism is in the shape of bell with a convex side rather than with a concave side.
凸形曲折边界可以引起断层转向，而凹形曲折边界的复合方向构成对断层走向的控制。
The convex kink boundary may initiate a change in the orientation of the faults, but the complex direction of the concave kink boundary may control the orientation of the faults.
台阶部分具有环形凸形部分，该环形凸形部分与环形凹形部分连接，并使得中心面板的至少一部分沿平行于纵向轴线的方向而垂直位移。
The step portion has an annular convex portion joined to an annular concave portion and displaces at least a portion of the center panel vertically in a direction parallel to the longitudinal axis.
影响滑塌的主要因素是凸形临空面的形态及岩体裂隙面的强度。
The primary factors affecting the landslide are the form of the convex free surface and the strength of the crack surfaces in the rock mass.
你能够标示翅膀归结于包括中凸形和机翼的中心线护墙板。
You can specify wing attributes including camber and centerline sheeting of an airfoil.
此外，本文设计了自动排料算法中其它一些相关的图形学算法，如凸包算法和合成多边形算法。
Besides, the paper designs some algorithms which are related with graphic algorithms in nesting algorithm, for example hull algorithm and composite polygon algorithm.
此外，本文设计了自动排料算法中其它一些相关的图形学算法，如凸包算法和合成多边形算法。
Besides, the paper designs some algorithms which are related with graphic algorithms in nesting algorithm, for example hull algorithm and composite polygon algorithm.
应用推荐