均匀的光线可以适当地突出房间的几何结构、加亮某些特色，创造柔和统一的环境，或成为一种装饰性设计元素。
Homogeneous lines of light can delicately accentuate a room's geometry, highlight certain features, provide soft and uniform general lighting, or become a decorative design element.
它不仅有很高的几何传输效率，而且还可以大大地提高泵浦的均匀性。
It has a higher geometrical transmission efficiency as well as a better pumping uniformity.
通过对侧视雷达图像进行合适的辐值校正和几何校正后，就能获得色调均匀、位置准确的镶嵌图像。
The Mosaic images with uniform tone and accurate position can be obtained after the suitable radiation correction and geometric correction for SAR images.
有限元法特别适合于解决复杂几何结构和非均匀媒质的电磁问题。
The finite element method suits specially in the solution of complex geometry structure and the inhomogeneous medium electromagnetic problem.
农家肥由于流动性差，输送时需很大的力，如何选择合适的输送机构的几何参数和运动参数来降低输送功耗，提高均匀性尤为重要。
The mobility of farmyard manure is so poor that a great strength is needed to carry the manure , therefore , how to lower the power and enhance the uniformity becomes particularly important.
我们如何几何化一个流形，也就是说给它一个均匀的曲率呢？
How might we try to geometrize a manifold - that is, give it a uniform curvature throughout?
应用几何光学中的射线理论，直观地讨论了准定常波在时间平均基流中的传播，解释了定常波传播的纬向非均匀性。
The ray theory of geometric optics was applied to visually investigate the propagation of quasi stationary waves in time mean basic flow and interpret the zonal nonhomogeneity.
几何校正过程实质上是由均匀采样序列插值得到非均匀采样序列的过程。
The geometric correction is substantially the process to get a non-uniform sequence by interpolation from a uniform sequence.
研究了几何缺陷、荷载非均匀分布和支座沉陷对圆弧拱面内屈曲的影响。
The effects of geometrical imperfections, unuhiform loads and support settlements on the in-plane buckling of circular arch are investigated.
人体新鲜骨骼是各向异性，非均匀材料，其截面几何形状比较复杂。
Human living skeletons are anisotropy material, they cross section geometric shape is comparatively complicated.
提出一种新型具有均匀流动分布的多流道片材机头的几何设计。
The design of a novel multi-flow channels sheeting die with uniform flow rate across the die width was presented.
在理智的时间既不是风荷载静力也不均匀变，而且严重影响的几何结构以及周围结构和景观。
At the sane time wind loads are neither static nor uniformly varying, and are heavily influenced by the geometry of the structure as well as the surrounding structures and the landscape.
分析中包括了搭板的几何尺寸、材料因素、地基非均匀、枕梁及沥青加铺层对搭板弯拉应力及变形的影响。
The influence of geometric size, material properties of the slabs, inhomogeneous subgrade, sleeper beam and bituminous overlay on the bending stresses and deflection is investigated.
模拟结果表明，光传输效率、储能密度分布和泵浦均匀性与泵浦腔几何构形有关。
The simulation shows that the transfer efficiency, stored energy density distribution and uniformity of the pump radiation are dependent on the pumping cavity geometry.
对含中心裂纹的无限大板在裂纹表面受均匀分布压力作用的情况，导出了几何非线性弹性断裂力学的能量释放率的一个精确表达式。
An exact expression of energy release rate for geometrical nonlinear elastic fracture mechanics is obtained for an infinite plate with central crack under uniform stress normal to crack surfaces.
对于给定的河道几何形状、坡度、粗糙度以及规定排水量，均匀稳流中出现唯一深度值。
For a given channel geometry slope and roughness and a specified value of discharge a unique value of depth occurs in steady uniform flow.
提出了一种基于辛几何的高频近似的新方法，并用此方法求解了电磁波在一非均匀媒质中的传播问题。
A new symplectic geometrical high frequency approximation method for solving the propagation of electromagnetic wave in an inhomogeneous medium is presented.
本文中的残余应力生成和加载方法同样适用于其他有复杂的几何形状和不均匀的残余应力的情况。
The method of building and adding the residual stress can be used in other instance with complicated geometry shape and unsymmetrical residual stress.
在一般的光学系统设计中，都假设光线服从几何光学规律，认为系统会均匀地传播所有的偏振态。
For most optical systems, it is assumed that the transmitted wavefront has uniform amplitude and constant polarization state across the exit pupil.
本文推导了均匀和梯度介质中的等时线公式并计算了二维均匀和梯度介质中等时线的几何特征。
In this paper we derive the formulas for the isochrones in homogeneous and gradient media, and give some numerical resul.
结合物理学的基本原理和几何光学的基本规律以及光度学的基础理论等三方面，研究了单纤维在平行均匀光束垂轴入射时的光学性质。
On the basis of theories of physics, geometrical optics and photometry, the optical properties of collimated light beam incident upon single fiber perpendicular to the fiber axis are studied.
采用坐标变换方法，将物理平面中任意几何区域上的非均匀网格剖分映射到计算平面中规则区域上的均匀网格剖分。
In this paper, an one to one maping is used to transfer an arbitrary domain and a nonuniform grid on it in physical plane to a rectangular domain with a uniform grid in computational plane.
针对由数字地图等以均匀网格形式给出的高程数据生成真实三维地形的仿真需求，提出了一种基于加权外推算法的地形几何模型。
For the requirements of creating 3d terrain based on the elevation data which is in the form of regular grid, a kind of modeling method based on weighted average algorithm is proposed.
通过求解灭弧室内部的静电场定解问题，优化其内部几何参数，使灭弧室内部电场较均匀，电场强度的峰值出现在“第二辅助间隙”中。
By solved this optimization model with finite element software, a more symmetrical electric field in vacuum interrupters was obtained and its peak value appeared in second auxiliary gap.
在假定照明光源是均匀分布的小圆形光源和狭缝为一矩形的条件下，分别利用几何光学和傅立叶光学给出不同屈光度下光强分布情况。
In the case of little circular light source and rectangular slit, the simulation results of different myopic diopters are obtained by geometrical optical theory and Fourier optics respectively.
针对散乱点云简化时经常丢失过多的几何特征，提出一种保留几何特征的简化方法。首先采用均匀栅格法划分点云空间；
Geometric feature always being lost excessively in the simplification process of scattered point cloud, a simplification method with geometric feature reservation is proposed.
针对散乱点云简化时经常丢失过多的几何特征，提出一种保留几何特征的简化方法。首先采用均匀栅格法划分点云空间；
Geometric feature always being lost excessively in the simplification process of scattered point cloud, a simplification method with geometric feature reservation is proposed.
应用推荐