提出各几何参数与阻力系数的关系。
The relations between geometric parameters and drag coefficient are developed.
分析了在不同拉丝速度下，光纤几何参数的变化。
The geometric parameter change of optical fiber at different drawing speed is analyzed.
车床刀具的形状和几何参数取决于它们的使用目的。
The shape and geometry of the lathe tools depend upon the purpose for which they are employed.
使用坐标变换法分析了斜角切削几何参数之间的关系。
The geometrical parameters associated to oblique cutting were analyzed using the coordinate transformation approach.
对无因次返混流率与操作参数和几何参数进行了关联。
Finally the dimensionless backmixing rate is correlated with the operating parameters and geometric parameters.
分析了齿轮副各几何参数及误差对轮齿振动产生的影响。
Analyzed the effects on teeth vibration exerted by geometry parameters and errors of gears.
总之，本文初步提出了用叶轮几何参数计算比转数的公式。
In general, a new formula is presented for computing specific speed with impeller geometric parameters.
该系统不会和目前的其他车辆那样影响外、纵倾角的几何参数。
This wheel travel does not affect the camber or caster geometries like current vehicles.
横移量的变化将极大地影响接触斑上的几何参数和力学参数。
The variation of lateral displacement affects extremely the geometry and mechanics parameters in contact zone.
鉴于良好的业绩数值模式，不同的流动和几何参数是可以实现的。
Given the good performance of the numerical model, different flow and geometrical parameters could be achieved.
低比转速泵几何参数对扬程的影响，应当侧重于综合影响的研究。
The influences of geometrical parameters on low specific pump head should be emphasized on comprehensive influence.
合理地选择PCBN刀具的几何参数和切削用量，以提高加工质量。
Rationally choose geometry parameter and cutting data of PCBN tool, in order to raise processed quality.
针对一类四次隐式代数曲面，提出一种基于分片的几何参数化方法。
This paper proposes a piecewise geometric approach to parametrize a kind of quartic implicit algebraic surface.
介绍了棘轮式单向器的结构以及该双模数制齿轮几何参数的计算方法。
This paper introduces the structure of ratchet clutch and the geometry parameter calculation of double module gear.
试验测试了不同几何参数下滤清器的滤清效率，计算与测试结果吻合良好。
By experimenting the filtering efficiency of air filter in different geometric parameters, the results tally well with that of calculations.
参数化设计是一种使用重要几何参数快速构造和修改几何模型的造型方法。
Parametric design is a modeling method. It uses important geometric parameters to construct and modify geometric model.
此外，通过降低悬挑部分的高度以研究几何参数变化对平均风荷载的影响。
Moreover, the cantilever height of roof edge was artificially lowered to investigate its effect on the mean wind loads.
提出了地物粗糙表面几何参数与物理参数分离理论，阐述了相应的实验结果。
The separation theory of geometric and physical parameters of the roughness surface and concerned experimental results have been described.
本文论述了一种对面阵c CD摄像机的几何参数进行解算和精度评定的方法。
This paper describes the method of computing a array CCD camera geometrical parameters and evaluation of the precision.
通过对转位机构的运动分析，得出了机构的几何参数与转位角度大小之间的关系。
Through motion analysis upon the indexing mechanism, the relationship between geometric parameters of mechanism and degree of index Angle was obtained.
最后根据程序计算结果，选取了换热器抽芯机主体金属结构的型钢规格和几何参数。
The size and geometric parameters of the rolling sections for the main body metal structure of the extracting core machine are selected according to the calculated results.
文中介绍了钨及其合金的性能熏以及在切削加工时刀具材料与几何参数的合理选择。
The performances of tungsten and its alloy, rational choice in machining of cutting tool material and parameter are introduced in this paper.
借助计算机辅助设计，研发了锥蜗杆传动几何参数实用算法，解决了复杂的设计计算。
By CAD, parameter algorithm of geometry pragmatic of the spiroid gearing is developed, consequently shaking off the complex design calculation.
本文分析了几何参数公差，以及线性尺寸公差与几何公差之间关系的国际标准的特点。
In this paper, the special feature of international standard of geometrical parameter tolerances and the relationship between linear size tolerances and geometrical tolerances are analyzed.
此模型为串并联型机床敏感性分析、误差补偿和几何参数标定等提供了新的方法和手段。
The model provides a new method and means for the geometrical parameter calibration, sensitivity analysis and error compensation of the machine tool.
在鉴印系统中，识别率很大程度上取决于印章预处理的好坏及其几何参数计算的准确性。
In the seal verification system of bank, the rate of identification depends on the performance of pretreatment and the accuracy of geometry calculation.
开发了参数计算软件，进行优化计算，得到优化的几何参数及参数对几何尺寸的影响曲线。
One software is developed to calculate parameters. By the software, the optimum geometric parameters and influencing curves of parameters on geometric sizes are obtained.
分析了各种流动参数和几何参数对轴向速度、二次流动、壁面摩擦力、摩擦系数比的影响。
We analyze the effects of the flow parameters and the geometrical parameters on the axial flow, the secondary flow and the friction.
分析了各种流动参数和几何参数对轴向速度、二次流动、壁面摩擦力、摩擦系数比的影响。
We analyze the effects of the flow parameters and the geometrical parameters on the axial flow, the secondary flow and the friction.
应用推荐