多项工程应用表明，该染色算法可靠、适应性强、染色效果好，可用于几何分析模型的验证。
Many engineering applications show that this algorithm is reliable, more adaptive and with better coloration effect and is used for validating the analysis model.
将模糊随机可靠度理论应用于边坡的稳定分析，建立了基于几何法计算广义可靠指标的数学模型。
A geometry based mathematical model is established for the calculation of reliability index by use of the fuzzy random reliability theory for slope stability analysis.
分析横轴式截割头摆动截割时截齿的运动轨迹，建立了其几何模型和运动方程。
By analyzing motion orbits of picks when a horizontal cutting head cuts, geometry models and motion equations are set up in the paper.
实验结果表明，分形维数能很好地表征表面轮廓，可为进一步的接触分析提供更合理的几何模型。
Taking rigid disk surface as an example, fractal parameters are obtained by means of power spectrum and structure function, providing a proper geometric model for further contact analysis.
提出了高桥墩之间几何非线性效应的相干分析计算模型。
The computational models of mutural distubance analysis about geometric nonlinear effect between the higher piers are proposed.
此模型为串并联型机床敏感性分析、误差补偿和几何参数标定等提供了新的方法和手段。
The model provides a new method and means for the geometrical parameter calibration, sensitivity analysis and error compensation of the machine tool.
针对每个结构模块的运动分析和功能需要，提出相关的结构模型，对重要的部件进行相关的设计计算，确定几何尺寸。
According to each structure module movement analysis and function, relevant structure model is set up and calculation is going on to definite geometry size for the important part.
在分析地质剖面图的几何特征的基础上，建立了地质剖面图的数据模型。
On the basis of analyzing the geometry characteristic of geologic section, the data model of section is built.
通过对模型轮廓曲线及表面的几何特性分析，编辑对象，从而达到对设计进行优化的目的。
Through geometrical feature analysis of curve and face of model outline, editing object, thus receiving purpose of optimization design.
分数几何对称模型已用于分析这类反应的一般规律。
The fractional geometry symmetry model has been used to analyze these kinds of reactions.
基于已完成的G550冷弯薄壁型钢屋架结构承载力试验，采用通用有限元软件ANSYS，建立考虑材料和几何非线性的分析模型。
Based on the experiments of G550 cold-formed thin-walled steel roof truss structures, an analysis model considering geometry and material non-linearity is established using general FEM software ANSYS.
运用圆弧条分法对尾矿库坝体稳定性进行了分析，建立了计算几何模型，计算出坝体安全性系数。
Using the circular arc Swedish method in tailing pond dam body stability analysis, the paper establishes the computation geometry model, calculates the dam body safety coefficient.
应用数值分析和计算几何理论，根据船体首部线型特点，建立首柱轮廓线数学模型；
Applying theories of numerical analysis and higher geometry, the corresponding mathematical model of stem line is established according to different stems.
利用该有限元模型分析了各层阻尼材料的几何及物理参数对复合结构阻尼性能的影响。
Based on the finite element model, the effects of the geometrical and physical parameters of damping materials on damping properties of composite structures were analyzed.
高杆塔绕击率建议采用电气几何模型分析和计算，并考虑倾斜角影响。
For the circular lightning stroke ratio of high towers and poles the electrical geometric model analysis and calculation are recommended with consideration of influence of tile Angle.
本文分析表明，刘易斯二元经济增长模型实际上是一个AK模型，这一点是以几何图示给出的刘易斯模型所无法揭示的。
In fact, Lewis' economy growth model is an AK model which has not been disclosed by geometric styled Lewis' model.
通过对预应力束设计阶段和施工阶段的分析， 说明了以NURBS作为预应力束几何模型的内在原因。
Prestressed strands in design and construction are analyzed, with reasons for selection of NURBS as the strands model.
使用击距描述的电气几何模型广泛用于输电线路的雷电绕击分析。
The electrogeometric model (EGM) described with striking distance has been widely used in the shielding failure analysis of transmission line.
分析了裤衩型钢煤斗外形的几何特点，建立了裤衩型钢煤斗漏斗表面的数学模型，分析了曲面展开的算法。
This paper analyzes the geometric features of the trousers type steel scuttle, sets up the mathematics model of the funnel surface of this scuttle.
应用改进的电气几何模型分析了输电线路杆塔结构、避雷线和导线的布置、雷电流的幅值、地面倾角对绕击率的影响。
With such model the effect of tower structure, lightning current amplitude, angle of the lightning incidence, as well as the ground angle on the shielding failure rate are analyzed.
对包含中等尺寸的成组分布裂隙的岩体，采用岩体几何损伤本构模型，用监测位移反馈分析法同时辨识岩体弹性模量、地应力及损伤参数。
In this paper, for the joint rock mass with medial size and in-group crack, parameter identification of its geometrical damage model is studied by back analysis of in-situ measured displacement.
第二，尝试建立常用投票规则的几何模型，通过理论分析来优化现有的投票规则。
Second, the geometry models of the voting rules that have been used usually are tried to constitute, to optimize current voting rules by theoretic analyse.
在简易柔性悬索桥桥型几何模型分析的基础上，对主索张力及其计算误差进行分析研究。
Based on the analysis of the geometrical models in a simple flexible suspension bridge, the skyline tension and its errors in calculation were analyzed.
建立了分布式SAR卫星的成像空间几何模型，分析了分布式小卫星SAR的模糊函数。
The imaging geometric model of distributed satellites SAR is presented and the ambiguity function of distributed satellites SAR is analyzed.
基于斜视成像几何模型，分析了目标回波信号距离走动比距离弯曲大得多的特点。
Based on the imaging geometry of squint mode, the characteristics of echoes in squint mode are analyzed in this paper.
通过对几何模型层次细节技术和可见性裁剪技术的分析提出了一种实现实时绘制的有效算法。
After analyzing the level of details and culling technique, we bring up a valid algorithm for realizing real-time display.
提出并分析了适合于多面体模型的边界几何求交方法，并进一步给出了融入模型重构的综合算法。
Then it analyzed the boundary geometrical intersection method suitable for a polyhedral model, and further presented a hybrid algorithm that integrates model reconstruction.
分析了坐标测量机几何误差的几种常用模型，提出了基于神经网络的单项几何误差模型。
Several coordinate measuring machine geometry error models of several kinds in common use are analyzed in this paper.
从挤压成形齿轮的制造工艺链出发，建立了精确模拟分析的工艺过程模型、几何模型、弹塑性有限元模型。
The analysis model, including process chain, geometry of the die, the elastic-plastic finite-element is built according to the practical process.
目标定位是通过双目视觉模型分析，利用空间几何关系，最后提出了目标点的三维坐标计算表达式。
Object location is defined as coming up with three-dimensional coordinate expression through binocular vision model analysis using geometrical relationship.
应用推荐