探讨了减小误差的方法。
分析了误差产生原因，提出了减小误差的方法。
The reasons of error are analyzed and the improving method is advanced.
减小误差、降低能耗是研制旋轮座追求的目标。
It is a goal expected by designers of spinning roller bases to decrease copying error and energy consumption.
详细分析了系统误差并提出了减小误差的相应措施。
Error was analyzed in detail and corresponding methods to reduce the measurement error were given.
最后，对系统误差进行了分析，提出了减小误差的办法。
In the end, we analyze the errors and give the methods of correct errors.
本文讨论了固体表面温度测量的误差及两种减小误差的方法。
The error of surface temperature measurement of solid body and two methods for lessening it are described in this paper.
采用高精度钢刺滚轮作为送纸器，以提高传动精度，减小误差。
By using high precision steel-string-wheel as deliver-paper-implement can improve transmission precision and reduce error.
提出了减小误差的改进方案，并在广东电网等值分析中得到应用。
A scheme to reduce the errors is put forward and has been applied in the equivalent analysis of Guangdong power grid.
在高压电力系统中，为了提高电压互感器的测量准确度，必须减小误差。
In high voltage power system, in order to raise measurement accuracy, errors must be reduced.
补偿电流在辅助铁芯中产生磁通，使主铁芯达到零磁通，从而减小误差。
The compensation current results in flux in the auxiliary core, making the flux of the main core zero, and thus reduces the error.
为了减小误差在不同扫描行之间的传播，利用透射数据对重建结果进行校正。
For reducing the error propagations among scanning lines, the transmission data are used for rectifying the scattering reconstruction.
主要介绍了DSC测量试验中基线的测量与应用效果，对减小误差起到关键作用。
The measurement and application of baseline in the DSC measurement testing were introduced, which plays a key role in reducing error.
并对BTF的两类误差进行了详细的讨论，同时，给出减小误差应采取的具体方法。
Two kinds of error in BTF have been discussed and some error decreasing methods are presented.
但是对实测的相关序列，我们可以利用相关序列的全部来减小误差对参数估计的影响。
But for case of measured correlation sequence the whole sequence may be used to reduce the effect of error on model parameter estimation.
电阻测量是数字多用表的基本功能之一，减小误差提高测试精度是测量设备追求的目标。
Resistance measurement is a fundamental function of digital multimeter. The development of this device aims for reducing the error and improving testing accuracy.
分析了传统的用共鸣管测量声速实验中存在的问题，提出了两种减小误差的新的改进方法。
Some problems in the traditional experiment of measuring sound velocity by using the resonant pipe device are analyzed.
本文对试验机因安装、调试不正确引起的示值误差作了较全面阐述，提出了减小误差的方法。
The absolute error caused by the improper installation and adjustment of hydraulicdynamometers is described, and the measures to eliminate the error are suggested.
分析了电力参数微机监测中的直接采样计算法与谐波分析法的误差，并提出了减小误差的方法。
The errors of harmonic wave analysis and direct sampling in electric parameters measurement are analyzed. The method to minimize errors is presented.
同时对试验结果产生误差的原因进行分析，并给出了减小误差的措施，以利于以后进一步的工作。
At the same time, analyze the causes that the test results cause error, and gives measures to reduce the error, to facilitate the further work.
对rtk技术在狭长工程运用中的点校正的误差进行了分析和探讨，并提出了减小误差的解决方法。
To the technique of RTK in long engineering usage of the error margin that point correct carried on the analysis and studies, and put forward to let up the error margin to solve the method.
笔者研制出一种新型纱线测长器，在纱线卷绕的过程中对其进行精确测量，达到减小误差、节约成本的目的。
Thus, we have researched a new type of yarn length measurer to solve the problem. It can measure the length of yarn accurately during yarn winding to reach the goal of minimizing error and cost.
本文介绍了一种采用铂电阻作为温度变换器进行温度变换的方法，并且给出了使用自动进行校准电路来减小误差的方法。
This paper introduce a method of temperature transform base on platinum resistance, and give out the automatically adjust electric circuited to minish error.
介绍了光电效应实验中通过确定截止电压测量普朗克常数的方法，并分析了实验中产生误差的原因，指出减小误差的方法。
This paper briefly introduces the basic principles to measure plancks constant by photoemission and the three methods to measure cut-off voltage.
文中讨论了口腔这一特殊的测量环境和一些影响测量精度的因素，在实测中摸索了一些减小误差的方法，最后对测量误差作了分析。
The paper discusses the factors which effect the measurement precision and the special measurement environment in oral cavity, and some methods for reducing errors and error analyses are also given.
利用计算出来的速度反馈构成了速度闭环系统，并采用低通滤波方法减小误差，同时应用了零矢量调制控制法减小转矩脉动，提高了整个系统的控制性能。
Constituted the speed closed-loop system with the speed feedback, used the low pass filter method to reduce the error, so the overall system control performance is advanced.
为了减小我的，反应误差，我会振荡十次。
In order to get my relative error down, I will oscillate ten times.
经计算机仿真表明，新算法与原算法相比，收敛性能有所改善，收敛速度加快，稳态剩余误差减小。
Computer simulation shows that the improved algorithm has better convergence performance than the conventional algorithm. It can speed up convergence rate and decrease state residual error.
通过这些手段可以减小部分误差，使得所建的模型更符合实际情况。
By these means can reduce the part of the error, making the models built more in line with the actual situation.
并采用误差合成的方法减小倾斜估计的误差。
并采用误差合成的方法减小倾斜估计的误差。
应用推荐