进行了用冷态实验模拟爆震室中雾化性能的研究。
The atomization performance of Pulse Detonation Chamber is investigated using cold test.
首先，完成了燃烧不稳定性主动控制的冷态实验研究。
Active control of combustion instability is tested on a cold model.
在流化床冷态实验台上，对废轮胎的流化特性进行了实验研究。
The experimental research on fluidization characteristic of waste tyre was done in a cold fluidized bed.
针对石油焦及其气化余焦的燃烧和流化特性，自建了冷态实验装置。
According to the combustibility and fluidization of petroleum coke and its gasification residual coke, a cold experimental equipment was established.
在冷态实验中，用热线风速仪测量研究了旋流燃烧器喷口的流场特性。
The flow field of swirl burner is measured by hotwire anemometer in cold modeling test.
总结了固体生物质热解液化装置——一套循环流化床反应器冷态实验的结果。
This study work illustrated briefly the fluidization characteristics of a CFB reactor, which is designed for the biomass fast pyrolysis.
在一个加压喷动流化床装置上进行了冷态实验，研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
为研究高炉回旋区的主要机理，采用相似和模化理论建立了回旋区的冷态实验模型，搭建了测试冷态模型的实验台。
To study the dominant mechanism of the raceway in blast furnace, a raceway cold model was established by similarity and modeling theory. A test facility based on the cold model was also set up.
建立了正三角形钝体尾迹流流动模型，基于冷态实验对粗糙壁面钝体尾迹流进行了求解，并与光滑壁面钝体的解进行了比较。
Mathematical analysis and numerical simulation is performed for the flow field near a rough wall based on an improved theoretical model proposed for the problem.
依据冷态相似模化的原理搭建气固两相流冷态实验台，利用试验台分别对原有旋流燃烧器模型和3种改进的燃烧器模型进行气相试验。
According to the principle of cold conditions similar, air firm two-phase flow experiment of cold conditions is built, testing the original burner model and 3 kinds of improvement test model.
本文主要针对径向浓淡旋流煤粉燃烧器中心扩口存在的磨损问题在一单相实验台上对燃烧器喷口结构进行了冷态优化实验。
In this paper, the abrasion of central division cone in the radial dense-thin swirl pulverized coal burner is studied by a cold optimize experiment carried at a single-phase experimental platform.
在冷态模拟实验中，就交叉射流的参数对主变形率的影响进行了研究。
Through a water simulation experiment, the influence of cross jet parameters on principle strain was studied.
用冷态模型和高温实验的方法，进行了熔融还原过程熔池中起泡现象的研究。
The foaming phenomenon in iron bath was studied by means of hydrodynamic model and high temperature experiment method.
在冷态模拟实验的基础上，研制了一种新型浸没燃烧装置，并对其基本特点和用途做了介绍。
A new type of immersion burning device is developed based on the cold-state simulate experiment. Its basic features and use are also given.
计算结果和冷态模化实验结果吻合良好。
The calculation results agree well with the cold state simulation test results.
在自行设计建立的电磁抗垢、减垢实验装置上，对冷态工况下低频电磁抗垢、减垢技术机理进行了实验研究。
This article discussed the mechanism of low frequency electromagnetic anti-fouling and descaling technology on the basis of the experiment device devised by ourselves in the situation of cold state.
利用冷态等温模化技术对浓淡型双调风旋流燃烧器进行了模拟实验研究。
An experimental study is conducted of a dense dilute dual channel swirl burner with the help of cold state isothermal simulation technology.
采用冷态模拟实验与数值计算相结合的方法对贾汪pfbc CC中试电站旁路烟道的减温器进行了专门研究设计。
The attemperator of the gas bypass of Jiawang PFBC-CC pilot plant was studied by simulating experiment and numerical calculation.
首先，在冷态流动中完成了利用网格湍流控制射流剪切层的实验研究。
First of all, control of the shear layer of jets by grid turbulence was studied for isothermal flows.
利用IFA300型二维恒温热线风速仪系统对双旋流气体燃烧器模型的冷态流场进行了实验研究，测量了流场内不同位置瞬时速度分布及湍流强度特性。
An experimental study was conducted of the cold-state flow field of a dual swirl gas burner model through the use of an IFA300 type two-dimensional constant-temperature hot-wire anemometer system.
进行了冷态流化实验，发现垃圾由于尺寸较大而只在密相区上下运动；
Basic research also includes fluidization experiment on a cold rig, and it is found that MSW moves up and down only inside the dense zone due to its large radius.
进行了冷态和热态实验，结合理论分析研究了密度锁的抗扰动机理。
The anti-disturbance mechanism of the density lock is analyzed by cold and hot state experiments with theoretical analysis.
结合实验研究的结果对冶炼过程中烧结矿在冷态和热态下的破损机理分别进行了剖析。
Finally the sinter damage mechanism under normal temperature and high temperature during smelting in blast furnace is analyzed with the experimental results.
设计了中心给粉旋流煤粉燃烧器，并进行了实验室冷态试验、现场空气动力场试验和热态试验。
Design central coal feeding swirl burner and carry on laboratory test while being cool, on-the-spot air power field test and test while being hot.
设计了中心给粉旋流煤粉燃烧器，并进行了实验室冷态试验、现场空气动力场试验和热态试验。
Design central coal feeding swirl burner and carry on laboratory test while being cool, on-the-spot air power field test and test while being hot.
应用推荐